Connect the iPod to the stereo

Similar Questions

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo

• I get an error "" device cannot start (10) "" when I try to connect the stereo headset bluetooth Motorola SF600.

  I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.

  Thank you.

  Dan

  Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver

  Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.

• Problems to connect the Ipod to Itunes after update 12.4.6.1

  Hello people,

  I just installed the new update iTunes (Version 12.4.6.1 for 64-bit Windows), once more a new provision which made it very confusing. I just tried to connect my iPod Touch (old enough) to sync my new music but the device does not appear on iTunes anywhere. I use the same yarn I used two days ago and it worked fine and has done for over a year as I tried a different lead but still no joy. The device is recognized by my PC as it starts to load connected as well as it appears in the folder 'My computer' which has an icon indicating 'Device Apple'. Any ideas on how to work?

  Thank you very much

  Jason

  Restart the AMDS > restart the Service of mobile Apple (AMDS) on Windows - Apple Support

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• Mouse and keyboard do not work after you have connected the iPod

  I don't have in my possession this maching XP yet as it is my niece.

  When it has connected his iPod, the configuration and the keyboard work more fully. Start in safe mode did not help, she said.

  Any suggestions for when I'll be at the computer?

  Thank you

  Hi dux.

  You can check what are the other USB devices on the computer.

  Often when there is a failure in one device in the USB chain, it can prevent the operation in other USB devices.

  You can try the iPod in another USB port on the computer.

  You can also remove a powered hub if one is connected between the device and the computer.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the message "device USB has malfunctioned and windows does not recognize it" when I connect my Ipod touch to load or put music on it.

  Original title: legacy A USB has malfunctioned and windows cannot recognize him does that mean?

  I get this message when I connect my ipod touch to load or put music on it. It worked before on both of my computers and I have not changed anything on one of them. I even bought a new usb cords just in case that was the problem, but still no luck. the funny this is that the battery in the corner of the ipod looks like he got some fees, but I'm not sure because of the message. I soft reset it and hard reset it I tried to install the new updates, but it is said that it is up-to-date. It is therefore unknown on my computer device how do I? someone please help.

  Hello
   
  The problem is specific to the Ipod?
   
  I wish that you follow all the steps in the article apple to fix the problem.
  http://support.Apple.com/kb/TS1538?viewlocale=en_US
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Blue screen on the guest operating system with code BUGCODE_USB_DRIVER when I connect an iPod

  Hello

  I use VMware server 2.0 (build 122589) on Windows VISTA 32 bit. The guest operating system is Windows XP SP3.

  When I connect an iPod Touch on the guest computer, after a few seconds, there is any time a blue screen Windows with code BUGCODE_USB_DRIVER. I have connected 2 different digital cameras and the crash does not add.

  Technical information:

  STOP: 0X000000FE (0X00000005, 0X8228F0E0, 0 X 80867112, 0X822FFF70)

  Does someone have an idea?

  Thank you

  Stop the prompt then proceed as directed by the attached screenshot with the VM highlighted in the left pane.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Connect the Tecra M11 to high fidelity

  I have a Tecra M11 which I want to connect to my onkyo AV 7:2 receiver so that I can listen to music through my stereo and watch movies on my TV.
  The amplifier has a range of input - RCA, hdmi, vga ports, digital coaxial and optical jacks.

  What happens to be the best way to connect the laptop to the receiver to get the best sound and picture quality? Is there an output high definition on the tecra?

  For the moment I do not have my hhoked receiver to my TV so I could not test any video output of the laptop via the vga connection. I tried to connect the two using a jack plug 3.5 over phone from the analogue headphones on laptop phono amp output input but does not have all the sounds (I get sound out of headphone jack when I plug in headphones).

  Hello

  Tecra M11 is a portable laptop professional not multimedia.
  As far as I know that the book contains only a monitor VGA (RGB) output port.

  I didn t find info on s/pdif user manual and I guess that this laptop doesn't support digital audio output. I think that you can connect to the laptop to stereo by using the headphone jack.
  This will help get an audio output to the stereo.

  You should not use such cable: [Y Audio splitter | http://www.amazon.com/gp/product/images/B00004Z5CP/ref=dp_image_0?ie=UTF8&n=172282&s=electronics]

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• How to connect the Qosmio G20 156 to DTT2200 sound creative

  Can someone recommend the best way to connect my G20-156 sound creativity works 5.1 desktop theater DTT2200. This was connected to a PC so I think a card external sound would be via a USB port, but is this the best way and that model?

  Hello

  I put t know what cables and what made the 5.1 support desktop theater DTT2200 but the Qosmio supports headphones with S/PDIF out.

  I use the headphone jack on my satellite to connect the unit to the stereo.
  I use a cable with a connector on one end and RCA connectors (red and white) 2 on the other end of the cable.
  The two connectors, I connected to HiFi and taking helmet.

  I think you can also try to use the same way to connect external speakers for the Qosmio.

• How to connect the Satellite Pro P100 to Hifi

  I've got Satellite Pro P100. How to connect this laptop to stereo
  It's probably easy, but what I can say... Call me stupid.

  I have head that comes out of the headphone jack, it connects to my friendly hifi.
  Ill be there is a unpleasant hissing in the background. Trying to hook up my boys in head mp3 player, and that works very well.

  Any chance of some help... Thank you

  Hello

  To my knowledge, you can connect the satellite Pro P100 to HiFi only via a cable 2 RCA Audio Y adapter. To my knowledge the laptop doesn't support the S/PDIF audio output so you only to use an analog audio port.

  You can also buy a stereo adapter with 2 x cinch sockets to connect the laptop to the stereo. This card can be plugged into the headset jack

  Check this box:
  Stereo adapter

  I think you should visit the nearest dealer of portable. It can show you the right and taken in charge of cables and adapters.

• Try to connect the Svideo TV

  I am trying to hook up a TV with S-Video with my laptop.  I plug the cables & when I go to the screen & my 2nd monitor/tv is not an option.  It's only as 1 to my laptop screen.  I'm trying to detect & still no solution...

  Most of the standard definition TVs supports only video composite or S-video connections. If your computer supports one of them, you may be able to connect it to your TV. However, both of these connection types will result in displays that are not as sharp as the results you get with an HDTV or a standard computer monitor.

  The following scenarios show you how you can connect a computer to a standard definition television:

  If your computer has this type of output port	It should work with this type of TV input port	By using this type of cable
  Composite video	Composite video	Composite video composite video
  S video	S video	S video S-video

  Connect your computer to your TV

  1. After that you have the right cable, follow these steps to connect your computer to your TV:

  2. Turn off your computer and place it near your TV. Unplug the monitor, but leave the mouse and keyboard connected.

  3. Connect the video cable appropriate to your computer's output to your TV.

  4. Turn on your TV and set it to the input that matches the output on your computer. You may need to refer to the supplied with your television user's guide for instructions on how to do it.

  5. Turn on your computer.

     You should see windows displayed on your TV. If the screen looks stretched, or part of the screen seems cut off, you will probably need to adjust the reference resolution in Windows. For more information, seeGetting the best display on your monitor.

     If Windows is displayed on your TV, you will need to reconnect the computer to your monitor and adjust the screen resolution before connect you to your TV.

  Notes

  • Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported audio signals, but not all HDMI-enabledvideo audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from computersound directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, cards seeSound: frequently asked questions.

  • If your computer does not support the type of video connection you need, you may be able to install a newvideo card that has the right connection.

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• my USB connect the sistem say it works well, but my USB key is not read anything like this isn't the power?

  I try to plug in my ipod and nothing happens to olso I try my USB and nothing happens not so some body help me with the problem please

  Hello

  1. How do you connect the memory card?
  2 How long have you been faced with this problem?
  3. don't you make changes on the computer before this problem?
  4. this happens with all USB devices?

  Try the fix tool of the article below and check out them.
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  The article contains information about advanced troubleshooting tips for General USB problems in Windows XP
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575