Permission to install problem - difficulty ineffective Instructions

Similar Questions

• My Firefox accepts no new extra, he continues to ask for permission to install them when they are already installed, what should I do?

  The reason why I use Firefox is the ability to be customized, since I use it, I want to my favorite characters and extensions, such as tools or dictionarys bars, but recently, without realizing why, whenever I start a new session in Windows XP, and for the first time I start Firefox, he asks permission to install options that are already installed. I have already uninstalled Firefox, deleted my old profile and re-installed all extensions try to solve the problem, but he persists, Firefox only correctly starts with all the extras disabled, which is very annoying because I allow facilities and restart, or in case the options are disabled, enable them, and restart Firefox. Can you help me fix this please? Sorry, but if you don't I'll have to go back to IE...

  I took some time, but finally I solved the problem. (Mostly because I had no time to do it before)
  I noticed that my AV has an anti-phishing toolbar that Firefox cannot remove, (she isn't just having 'remove' button in the Add-ons Manager), I am suspicious of this kind of behavior and decided to uninstall the AV.
  Fortunately, it has solved the problem and allows us to conclude that it was a problem of incompatibility caused by the toolbar of the VA.
  Thank you for your valuable help!

• Desktop HP Pavilion p6210y PC: RAM install problem

  My office is in the factory with the exception of the video card which is a NVIDIA Geforce GTX 750Ti graphics card.  I bought by 4 chips of RAM DDR2 PC2 6400U 800 MHZ 240 PIN by Samsung and installed according to the instructions from HP.  I also double checked my bios and updated to the latest version that has been on the HP website on 20/05/15.   When installed and rebooted my computer I first had a problem with my computer freezing completely on my and I have to make a difficult stop by disconnecting the tower.  I did a reboot and done a diagnosis (F9) and waited to see what would do the memory.  Initially, I had a 'FAIL' BIOMEM-1 error.  After a few attempts, I then is gone one chip at a time and done the same thing.  After that the first 3 installs successfully, I determined then a single chip was bad.  At this point, I restarted my system and started running it with 12g of RAM.  After about 10 minutes, my computer froze again and went to a blue screen stop.  After that restart the desired system get a dskchk is for windows.   I've looked online and made a Windows hotfix, and cured this problem but continued to get the gel and closed blue.  I then reinstalled the factory RAM chips, and it is not reappeared since.  According to all that I can see 3 of my chips are good and should run.  What other steps could be or are at - it a driver for updating bios them or not, I have to do?  Help, please!

  @sooperglew

  Only using three DIMMs will force the PC to run in single channel mode.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• Why can not install "Microsoft difficulty it Tools.

  Why can not install 'MICROSOFT DIFFICULTY IT TOOLS?

  After re-installation and update of XP, I had trouble to install Microsoft fix - it. When I downloaded it, I was told that it was a mistake and asked to try again later. (Frustrating, there is no error number and no information on the nature of the error.)

  Looking at my logs of errors (start > Panel > administrative tools > component services > Event Viewer, I could look at the logs.)  In this case, I found a mistake for CARPET (Microsoft automated troubleshooting service).  An internet search will find many very official looking websites offering downloads to fix the problem, but don't be fooled, most (all?) of these sites are trying to download a file that contains a virus or malware.  Use rather a search on internet of the type of error and the error number to find the measures to take to resolve the problem manually.
  In this case, the correction of this error was relatively simple but hard to find (thanks WR203). Go to start > Control Panel > administrative tools > services and right click on Microsoft automated troubleshooting services and select Properties. On the connection tab, select the radio button for "this account:" and enter "NT\SYSTEM authority" (without the quotes).  You must then provide and verify the password of your system.  If successful, you will be asked to restart the service. On the general tab, the startup type should be set to "automatic".
  It's well MATTE work on my system that has removed the obstacle to downloading and running Microsoft Fixez_ the.

• I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  I just got my 14 mailed items.  I have NO card or anything else.  I can't install it following the instructions online. I have no codes or numbers except the bar code.   Help, please.

  Hello

  You can search the Redemption Code that would be a 24 digit alphanumeric code, you may have received or will need to get to the place where you buy first or Photoshop elements 14 and can access the following link to get the instructions to use the code to get the series license key to activate the product.

  Redemption code help

  If you're still having problems getting the series license key, you can contact Adobe customer service to get the license key of series.

  Contact the customer service

  You can also access the following link to download installers for first 14 elements or Photoshop elements 14 accordingly.

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Thank you.

• How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  original title: operating system

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  If the installation provided with your Windows computer discs was preinstalled on the computer - it is OEM and cannot be moved. You can move Windows to another computer if you buy the retail version.

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

• I have the permission to install Cloud Creative applications on a 2nd computer?

  I currently have all of my software CC installed on my Mac, but I just found out that Premiere Pro for Mac has transitions much less than the version of Windows.

  I have the permission to install also the Premiere Pro on my PC so that I can have access to additional features, or what I need to remove my Mac if I want it on the PC?

  Acrobat is one who still has some features on the side of PC which is not on the side of Mac. Other than that, I think they are playing.

  Michael Riordan

  http://www.learnadobesoftware.com

• Laptop had a problem to "Solve a problem with PSIKey", solution from Windows & installed according to the instructions. How will I know that the problem is solved?

  has stopped working properly.

  An update is available that solves this problem.

  Downloaded Update site Web Protexis, Inc. and told to follow the steps in the installation wizard. The file downloaded and said he was setting up installation. Then after a few seconds, the box has disappeared and nothing else happened. How will I know if this problem has actually been resolved? My laptop has shown 6 problems with this unit from 30/07/11-08/12/11, where the unit has stopped working. Because I don't know what it is yet, I don't know really if the problem is solved or not. What should I do at this point? I have a SP2 7520-5185, running Vista Home Premium, Acer-Aspire. Thanks for any help you can give.

  Hello

  If you have installed a trial or paid a licensed version of Corel software products, you probably may notice a third unannounced software application makes its way into your computer too. The program is PSIService.exe by Protexis, which installs a Protexis V2 of Licensing Windows operating system service or Protexis licensing service.

  PSIService belongs to protect DRM (digital rights management) copy protection and license management software, which is intended to protect an application or software against piracy and illegal copying. Thus PSI service is normally installed by another program, such as Corel Paint Shop Pro Photo X 2, Corel Paint Shop Pro XI (X 1), Corel Paint Shop Pro X, that uses its service to collect information of license to repatriate much like spyware, protect copy and authenticate the user who is using an authentic version of the program.

  When you tried to download and install the program, if the box that says closed the dialog box when the download is complete has been verified, it will close the dialog box.

  I suggest that you restart the computer and check if you get an error message.

• Service pack for difficulty Win7 install problems? ___

  Was NOT ALLOWED to read a post regarding win7 & service pack for win7!

  Now, I read that a service pack win7 will be released sometime in July.

  Will be service pack "fix" Setup encountered problems where one of the practical suggestions for some was to remove the CD when the clean install restarts.

  If it is possible to "slip stream" win7 service pack, then I'll try again to install my win7 student (x 64) on my winxp (32).  The installation worked (removed the CD) but win7 worked for 1 week, & then _ broke loose. was never able to install win7 yet as he entered in a constant loop even with a "clean" install every time.

  A beta version, is not ready for public consumption pre-release Service Pack 1 in July. Service Pack 1 will be a minor update which will contain essentially all the updates since July 22, 2009.

  http://windowsteamblog.com/blogs/Windows7/archive/2010/03/18/talking-about-Service-Pack-1-for-Windows-7-and-Windows-Server-2008-R2.aspx

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• permission of iTunes problem

  Hi guys,.

  For the 2 + last month, I've been trying to find a solution with Apple on the phone at the genius bars, then turn on the phone recently with the United States... but not getting anywhere, so, in the words of Leia "Obi Wan, you're my only hope!"

  I have a MacBook pro, no problems in backing up my iPhone 6 until some time ago (and the best I can understand it was after iTunes 12) that I could not saved the iPhone because of not "having permission".  I implemented with this for awhile, and then he started to get boring, regarding the months now, I have not back to my phone, the situation has become so critical that I even thought to install iTunes on my work PC... but why do I do this?  A Councillor I got from apple is that it can relate to a full "locked" after a remote scan/report .plist file from my system.

  To this day, I reinstalled iTunes OSX and even tried iMazing (which gives me a similar warning) it is interesting I can plug my iPad in my mac book and iTunes it identifies as soon as possible.  There is nothing wrong with the phone that when I was with the three genius recently they plugged on one of their own mac books and once again no problem.  Is it possible that I can use time machine to selectively download all my 'must haves' after wiped my mac book, then by installing a fresh OSX, then systematically load from my backup all the BUT the piece incriminated the whimsical script which is at the origin of the permissions issues?

  Any assistance is welcome, "may the force be with you."

  Kind regards

  Paul.

  You can back up iPhone to iCloud? iCloud: save your iOS to iCloud device

  Ideally, you would do this before you try the step below.

  In iTunes > Preferences > units can delete you the existing backup for this device and then make a new one?

  TT2

• What are the proper action to take for the non-installing/re-installing Microsoft difficulty he Center?

  Difficulty this Microsoft program does not work on my laptop.  When I try to use the fix it services, I have the following error messge: Troubleshooting cannot continue because an error has occurred, program encountered a runtime error code: 80070005.  He wa suggested to other users, the re - install the program could solve the problem.

  Hello

  I suggest you send your query in the link below

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Install problem COD file

  Hi all

  I know it's important to look for answers before posting and I spent several hours to do.  I found a few related messages, but the solutions did not resolve my problem.

  I have a J2ME application that is fully tested for the game.  It works fine when it is installed as a pair of jad/jar on each Simulator and device I've tried.  And the midlet icon appears in the interface of the phone, just as it should.

  The game uses no RIM specific libraries or modules.  As a jad/jar pair, the same build runs on dozens of non-blackberry devices.  The code in the jar detects that the phone is a blackberry using System properties and the game is its own minor configuration to look nice on a blackberry.

  The next step is to convert the application into a cod file and sign it.

  You use the JDE 6.0, I made a new project, imported the jad/jar and run the Build command.  The cod was created, and accordingly modified jad.  So far so good.

  I have my signature identification information, and once again, using the JDE, I ran request Signatures.  The interface reported success.  No problems.

  The cod file is 207 k and consists of 4 cod files.  I read the instructions for this case and unpacked the cod file in its 4 cod files.  App.COD, 1.cod - app, app - 2.cod, app3.cod.

  I've posted four cod files as well as the jad file on my server, the server apache even where I serve regularly jar/jad files.

  I have triple checked the mime types in the .httaccess file.  Mime types are correct for jar, jad and cod.

  I point the browser on the Blackberry 6.0.0.337 Simulator 9800 to the jad file.  I get the download window with the properties of jad and the download button.  I click Download.  If I do this a second time, I get the button replace, so the Simulator think that the file has been downloaded, in this case.

  It seems that the files are for download.  The watch cursor appears 4 times, probably once for each file in cod.  No errors.

  At the end of the download, I get a message "the application has been installed successfully" and an OK button.  But, no run button, as I get with the installation of the pot.  I click OK.

  I exit the browser and return to the main screen.  There is no download folder.  The game is not in the folder games or Applications.  If I go to Options/Applications, the game is not listed there.

  If I menu click the Options/Applications window, I get: JVM 104 Eception NullPointerException error.  However, I had not yet tried to run the application.  A stack trace turned up a few odd lines:
  UI - EUI no face is detected
  VM - BORK
  However, I do not know what generated those lines or when.

  By the way, I also tried to download the full 207 k cod or in this case, I get the 907 error expected because the jad file is referencing files of cod that the server could not find as separate files.

  I also tried to download other simulators, for example 5.0.0.54 5 9700.  As above, the files seem to download very well and I get the message: "the application has been installed successfully" and an OK button.  On this Simulator, there is a download folder, but it is empty.  The game is not in games or in the Applications folder.

  On this Simulator, I go in the Options/Applications, and there is an entry for my game.  The title of the game is OK, but there is no icon.  I opened the entry and get title properties and a delete button.  There is no run button.  It shows the installed date and another button for the properties of the Module.  It also shows the size correctly and the signatory IDs.

  I also tried this procedure on a physical device, the AT & T 8300.  I had the same behavior as the 9700 Simulator.  Again, there is no problem with installation of the jad/jar.  The problem is with the jad/cod/COD-1/cod-2/COD-3

  Why is - this game appearing to successfully download and install successfully but apparently not be installed can thus be run?

  Thank you for your time.
  Alan Weiler

  I think I found the problem.  I skipped a step during the cod using a jar of J2ME as a source of files.

  In the projectroperties:Application panel, I do not enter the name of my main class name of the Midlet main class field.  Apparently this area causes the main class to be the entry point.

  With the class entered into this field and re - build the cod file and new signing, I was able to download and run the game on a device.

• Cannot install Microsoft difficulty It Center or run Fix It solutions.

  I tried to download a Microsoft Fix It to http://support.microsoft.com/mats/program_install_and_uninstall/ that I already used successfully for installation and uninstallation of problem programs.

  However, today the Fixit downloaded but cannot start.  The Microsoft Fix It error message is "this help desk is not available. This troubleshooting is not valid or may have expired. If the file name has changed during recording the convenience store, the convenience store is cancelled and cannot be run. For the current version, please visit http://www.microsoft.com/fixit. " This link takes me to the site Web of difficulty there but redirects me to http://support.microsoft.com/find-solutions/windows/windows-8/

  which provides no help.

  I tried to download and install the 3 different browsers but still get the same result. I can't also successfully install the Microsoft Fixit Center, I had also once installed and works since the upgrade to Windows 8.

  In another development, I find that after the first two attempts to download and install the It Center, now when I followed the link to the difficulty It Center on Microsoft's site is no longer takes me to fix It Center redirects me to http://support.microsoft.com/find-solutions/windows/windows-8/, which has very limited assistance options, but does provide me with anything even from a distance on the subject. No matter how many ways I try to install or even get to the difficulty It Center, I am unable to do so.

  I used successfully the difficulty It Center and also to run Fix It solutions, given that I have upgraded to Windows 8 Pro. Why can I no longer use this important and useful support tool?

  FixIt center does not work on windows 8. It has been improved and is in beta, but it's only for Windows 7 or an earlier version. See the following page: http://fixitcenter.support.microsoft.com/Portal/FindSolutions

  Explain your problem here in the forum and someone will help you.

• Cloud needs the permission to install, how to fix?

  How to give permission to Setup cloud?

  Hi red1985,

  If you receive an error that you do not have sufficient permissions to install the software, then please try to install under a newly created local administrator account.  A normal administrator account should not run in these difficulties, so it would seem that the permissions of files in your current account have been damaged.

  Alternatively, you can consult your Setup to specifically identify logs where file permission errors are produced.  Please see the problems with the Setup logs. CS5.5, CS5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to locate and interpret your Setup logs files.