Permissions for the model folder

Similar Questions

• Adobe Presenter is unable to publish this presentation. Please make sure you have enough disk space, and you have the appropriate permissions for the destination folder.

  I have 10 presenter and already published my adobe connect presentation. But now I can not do more. I can't post on my computer or as a pdf also. I have used collaboration and then put off, but no effect. Where is the problem?

  Could you please create a new user account in Windows that has full admin rights and also clear your temporary files and the folder.

  Then try to perform the same steps and let me know if it works.

  Kind regards

  Rajeev.

• Lightroom CC "User permissions error" - cannot change the permissions for the folder Preferences

  I noticed that Lightroom was running slow so I thought it was time to take stock. (I was using Lightroom 5.7). Yesterday, I downloaded the last LR update, which is Lightroom CC [1067055]. I thought that Lightroom CC would replace 5 Lightroom but apparently they have downloaded as separate applications. When I tried to launch Lightroom CC I got an error message indicating "Lightroom has met permission issues. I followed the directions from this link met Lightroom user permissions problems. Bridge of Photoshop Lightroom crashes or hangs at the launch but it does not set itself (I did not take the final step which is - create a new user account). I was working off of Yosemite, so I hope that the error can be corrected if I updated my operating system. Today, I downloaded El Capitan and Lightroom CC will not always open - I get the same error. I went to manually update the read and write permissions for the folders listed, but some of them don't make changes. The preferences file gives me an error saying "the operation cannot be performed because you don't have the necessary authorization." I don't have the "Adobe" folder in this route Caches

  • /Users/ [user name] / Library/Caches/Adobe /.

  How can I solve this problem and get Lightroom CC to work?

  

  @laurawielos,

  Try this:

  the Macintosh HD > users > [your user folder... click on 'Go' on the options bar at the top on the desktop (Menu bar) > then click on the 'option' key > mouse down to the selection of 'Library' that should appear > click on it to open the folder /Users/ [your user name] /Library/ ' "]

  You should now find the appropriate folders to change permissions. Just give your user name of the read/write permissions. I don't think you want to give everyone the read/write permission as some authors have claimed.

• When is Adobe going to solve the problem of permissions with the Preferences folder?

  As for a LOT of OTHER people, I've been making ridiculous crash at the launch of my adobe software. It takes 1 metric eternity to finish "initializing MediaCore. When AE finally opens the warning "QuickTime is not installed on this system.

  The answer I've seen the new is:

  with preferences or preferences corrupt folder permissions problem

  Still another cause of After Effects and communicating not QuickTime is a problem with the permissions for the files in the After Effects preferences directory. To force After Effects to rebuild preferences directory and set the permissions correctly (as well as reset the corrupted preferences), quit After Effects, remove the folder next, then restart After Effects: (Mac OS) [drive] /Users/ [username] / Library/Preferences/Adobe/After Effects (Windows) [Player] Users [username] AppData/Roaming/Adobe/After Effects The question can be also with permissions for a folder outside of the folder permissions of After Effects. This seems to be particularly the case in Mac OS. To ensure that all Adobe applications can write in their preference files, set the whole of Adobe and content preferences folder to be read/write, not just read-only: (Mac OS) /Users/ [username] [drive] / Library/Preferences/Adobe /. (Windows) \AppData\Roaming/Adobe\ \Users\ [username] [drive]

  but that won't work because I can't change the settings of these records, and from what I read there is no shortage of others who can't.

  No matter what I windows does not allow me to change any file in my files, users must have read/write permissions.

  However, it seems that my adobe programs don't is loading incorrectly unless I have change permissions to read/write. I think that we all pay a little too much for this software to expect to find a way to hack our own computers to get the programs work.

  To do some kind of fix, soon. Maybe to be able to move the adobe preferences folder to another directory? IDK...

  I know I'm not alone here... maybe a bit of help? anyone?

  Well, just to test things, disable it and try to re-run AE.

  You are the third or fourth person I've seen today with AVG and similar issues. Turn it off, fixed it for them. AVG apparently did some update recently to cause this.

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• Weird "cmd" option in the context menu for the drive/folder

  Recently, I noticed a strange 'cmd' (as what) command appeared in the context menu for the drive/folder. After pressing it, I get an error "this file doesn't have an associated program to perform this action."

  Efforts to eliminate this question nagging eye, using regedit and various 3rd party menu popup editors, have failed.

  Any ideas why this might have happened?

  Thank you in advance.

  So, I thought about it. It indeed is a corruption of the menu prompt integrated (that I didn't know existed until I started to search for this problem).  The problem and the fix is here:

  There is a key called "command" in HKCR\Directory\shell. Delete the key "cmd" under "shell", and then adding the following code appear to have solved the problem.

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt]
  'Extended '=' '
  "NoWorkingDirectory"=""

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt\command]
  @= "@shell32.dll,-8506.
  'Extended '=' '
  "NoWorkingDirectory"=""

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt\command]
  @= "cmd.exe /s /k pushd \"%V\"" "

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• How to restore the permissions for the folder

  I work with Windows 7 and Internet Explorer 10.

  Initially I tried see my Cookies folder and eventually he finds in C:\Users\(my user name).  I wanted to look at the files and potentially manually remove some, but I was not allowed access to the folder.  I am the sole owner and the user of that PC.  I figured it would give me full permission for files and folders.

  I tried to change the permissions on the folder, and even if the properties show that I have all permissions except "Special permissions" I was unable to open the folder.

  A second possibility, I changed the permissions 'All' allow all these same permissions - I clicked on full control.  A warning window appears saying that there are permissions that were more in agreement and it is potentially unstable.  I then decided to cancel this change all the permissions back, but am currently not able to restore the original permissions.  I am really unable to change all permissions to this folder now.

  I would like to restore the permissions on this folder Cookies in their original condition / by default.  Can someone help me?

  ALSO: since my original post, I noticed that in the icon beside my C:\username\ subdirectory when you view it in Solution Explorer, there is a lock.  I don't know if it was there before.  Is this a normal representation / by default to the directory?

  Thank you.

  Hi Susan,.

  Please follow the steps suggested by Amrita in http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-to-reset-all-user-permissions-to-default/9da312d2-c99b-4283-a275-e74d93dcc366

  Note: The steps mentioned in the link above involve changes to the registry. So it would be nice if you could take a backup of the registry before you start the troubleshooting step.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  If the problem persists, try the steps suggested by Brent in http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/restore-default-permission-settings-in-vista/7eacb966-cbbd-41ac-b08d-7c7f881943be

  Note: The steps in the above links works for Windows 7 and Windows Vista.

  For more information about the symbol of lock on certain issues, please go through the response of Steven S't-want-any-locks/f82a3e5e-5164-4dc2-9ec5-3e97ce7606d9 http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-have-lock-symbol-don

  Hope this information helps. If you have any questions, please let us know.

• Trying to assign permissions for the Admin user on the folder root

  I am trying to add a domain user on the permissions of the folder for the folder root in vCenter with administrative permissions.  I can get it to assign permissions for folders under the root, but not at the top of the tree.  See code below.

  #Create a VIAccount object can be used with New-VIPermission, Get-VIPermission, PowerCLI etc.

  Function New-VIAccount ($principal) {}

  $flags = '

  http://System.Reflection.BindingFlags: NonPublic - bor

  http://System.Reflection.BindingFlags: Public - bor

  http://System.Reflection.BindingFlags: DeclaredOnly - bor

  http://System.Reflection.BindingFlags: Instance

  $method = $defaultviserver. GetType(). GetMethods ($flags) |

  where {$_.} Name - eq "VMware.VimAutomation.Types.VIObjectCore.get_Client"}

  $client = $method. Invoke ($global: DefaultVIServer, $null)

  Write-Output"

  (New-Object VMware.VimAutomation.Client20.PermissionManagement.VCUserAccountImpl ')

  (- ArgumentList $principal, "", $client)

  }

  $svcaccount = $domain + "\" + $username

  $account = new-VIAccount "$svcaccount".

  #(Get-dossier-dossier nom) | New-VIPermission-role Admin - main $account - spread: $TRUE # this adds the user to a folder called folder without any problem.

  (Get-file-name of the centres of data-Id file-group-d1) | New-VIPermission-role Admin - main $account - spread: $TRUE # when I try to apply to the root folder I get the following error:

  New-VIPermission: 2009-12-24 14:19:30 new-VIPermission 9C9AB6A7-E395-42D1-B944-516E1BBBCEF2 reference object not set to an instance of an object.

  To... vCenterSettings.ps1:93 tank: 70 + (Get-file-name of centres of data-Id file-group-d1). New-VIPermission < < < < - role Admin-main $account - spread: $TRUE

  I was able to reproduce the problem, which seems to be another bug for the cmdlet New-VIPermission in PowerCLI 4u1 indeed.

  As a workaround, you can call the SetEntityPermissions method directly like that

  $domain = 
  $username = 
  $svcaccount = $domain + "\" + $username
  
  $folder = Get-Folder -Name "Datacenters"
  $authMgr = Get-View AuthorizationManager
  $perm = New-Object VMware.Vim.Permission
  $perm.principal = $svcaccount
  $perm.propagate = $true
  $perm.roleid = ($authMgr.RoleList | where{$_.Name -eq "Admin"}).RoleId
  $authMgr.SetEntityPermissions(($folder | Get-View).MoRef, $perm)
  

• How can I change the permissions for the program, I get the error message windows cannot find the target and II do not have permission to open any programs

  I deleted a virus and now I can't access anything whatsoever, except by admin, and is very limited

  Hello

  Permissions and security issues with Vista/Win7?
  

  Check the following settings.

  All the users who are allowed to share need to have an account on all computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users.

  Using the functionality of all saved the need to configure authorization for each of the established users, it does mean not all those who feel that they would like to connect.

  Users who do not have an account on the computer are not part of the Everyone group.

  If the LAN security is useless and users are not established, then move on the guest account provides the semi-open configuration.

  http://Windows.Microsoft.com/en-us/Windows7/turn-the-guest-account-on-or-off

  ---------------------

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

• The permissions of the shared folder on linux using kerberos hosts

  I'm having a lot of trouble with permissions on a shared folder.

  The root of the problem is that the uid/gid of the user of the host are different from those of the guest user. The guest user performs authentication kerberos and if their uid/guid appear not in/etc/passwd (do, obviously appear in getent passwd, but only later once kerberos and winbind began).

  In other words, forcing the * home * uid t to be the same as the (possible) * comments * uid would not work.

  What I need is:

  1. to remove the/mnt/hgfs after kerberos has started and then replace with the correct uid/gid obtained from kerberos.

  But I can't do it because a kernel mismatch won't allow me to mount hgfs actions (device not recognized)

  If someone knows a solution I'd be glad to hear that this would solve the problem very easily

  OR

  2 force the mount initial hgfs at boot time using a certain uid/gid (these are fixed for a given machine)

  I have looked everywhere but could not find a config file that would allow me to do.

  Is this one? Where can I find it?

  Thank you very much.

  I fixed that by removing the part and the remouting with:

  vmhgfs-fuse .host: / $MOUNTPOINT o auto_unmount, uid = $UID, gid = $GID

• deploy a virtual machine for the model stored in EXSI server via the command line

  Hello

  Is it possible to deploy a vm from a template stored in exsi server via the command line?

  The structure is shown in the attached picture. I want to deploy the model under "Templates" folder to a virtual machine "VM" sub-folder by command line of any machine.

  

  Hello

  PowerCLI can help you achieve this goal. Using PowerCLI, you can deploy remote host model.

  Here is an example for the same.

  http://www.harryjohn.org/deploy-multiple-VMs-from-template/

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol