Permissions of the user

Similar Questions

• Permissions for the users of Thunderbird

  Dear staff of Thunderbird,

  I have a question to limit the permissions of the users in Thunderbird.
  I want to set permissions on the installation of Thunderbird extensions (add-on), users could not install no matter what extension (add-on).
  Is this possible, if so how to configure?

  Thank you in advance,
  Computer SCIENCE Department of CJSC
  Hayk Haroyan

  Think a little out of box... I guess people have their own computer / user account.

  Thunderbird would need to have been already installed, but I think you could change the privileges and prevents the user from any other software installation/download.

  Such as:

  • http://www.thewindowsclub.com/how-to-prevent-users-from-installing-programs-in-Windows-7
  • http://install-block.software.informer.com/

• Shell ESX or MS Powershell script to add permissions to the user host account

  I have this command "Add a user" ESX 3.5 service console...

  CD/usr/sbin /.

  adduser-l user-p password u 502

  You know the command to give this user 'Read only' "permissions" of the "ESX Server"?

  The attachment shows where the permissions of the user (in this case Akorri) have been added to the GUI of the VIC connected to the ESX host.

  Even better... You have a PowerShell Script to add users and permissions?

  Hello

  You must use a shell script to modify the etc/vmware/hostd/authorization.xml file. I have yet to see a powershell script that can make these changes for you, but you could check in PowerGUI.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• You cannot change the permissions of the user

  Hi guys,.

  I have a MacBook Air, which started with the 10.11.4 2014 loading screen and would be turned off once the progress bar moves to halfway.

  I ran MRI what diagnosis came thin and storage said it was a software error.

  I removed the SSD drive and placed in a basket so I can see the SSD on my iMac. He goes (to the Mac OS Extended format) and I can see the folder of the user, but under "Sharing and permissions", she says that I can read only. In most cases I would be directly click on the padlock on the bottom right, change the privileges and choose "apply to included items", but it is all grayed out.

  I ran and fixed the permissions through terminal (since I can do is no longer on the disk utility). No idea how to get around this problem? There are files on the SSD drive which unfortunately were not backed up.

  Note: I also tried to run BatChmod but it has not fixed either.

  Any ideas?

  Your help would be much appreciated.

  Thank you.

  Repairing permissions has no effect on your Home folder.

  Reset permissions on your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• How to give permissions to the user for the administrator.

  I work in an organization. We use Windows XP with SP2. I delete the administrator user rights. At that time, some user systems have it problems.that's files and folders are not able to move, copy, cut, delete, all permissions are deleted. Please tell me how to give these permissions (move, copy, cut, delete) for the user's systems.

  This article explains how to set file access permissions:

  "How to set, view, change, or remove special permissions for files and folders in Windows XP"
    <>http://support.Microsoft.com/kb/308419 >

  HTH,
  JW

• Permissions of the user - administrative permissions

  As it goes with all Microsoft products, I was an alternative to get away the illogical people at Microsoft.  In this case, their insatiable desire for everything do so difficult and unstable that when a problem occurs, there is no answer or solution.  I lost from one day to the next my permission on a computer on which I built using Vista Ultimate and it basically makes your computer of all the unusable data now or in the future.  As with most Microsoft problems their illogical security permissions and the absence of instructions on how to set permissions for a single computer at home are par for the course.

  How to bring back once the operating system Vista deleted the administrator administrator rights.  What I said is that I cannot and it will lose most of the items on the hard drive, unless I have spend a fortune to download these files on another computer.  Microsoft staff, of course are never available to fix call or help their product, just to sell and would not consider any warranty claims they can get.  What a monopoly.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Creating table in the schema has with the user B and granting permissions to the user C

  Hello, I have a problem fun - we have a large table which requires a batch to make millions of updates, and he needs to finish more quickly. It takes several hours as an update, but a select create table did the same thing in about a minute. Yay! Then we just delete the old table and rename the new table to the former, rebuild all the index and grant select/insert/update/delete permissions to another user who needs access... and there is the problem, Oracle said insufficient privs.
  
  We have A figure, which is the owner of the table, userid B who done all the stuff of application batch and userid C which performs inserts for a process of middleware. None of them are actual users, of course. We want that user B to do the ETG, rename, rebuild and re-grant of the authorisation of the index. But user B apparently cannot grant permissions on objects in the schema A to user C, even if B has created the table and has the role DBA (not ideal, I know)!
  
  What's really crazy is that there is no sense unique user b can grant permissions to user C, which is to:
  
  grant select any table USER c;
  grant insert any table USER c;
  grant update any table USER c;
  Grant delete any table USER c;
  
  It seems really perverse can create tables in diagram A and even grant C privs "whole table" that user B, but may not grant privs specifically on this object in the schema A, even with DBA privs. I must be missing something... right?

  Yes. By default, the stored procedures are stored procedures from DEFINER rights. If A is the owner of a stored procedure, this stored procedure can do whatever A enjoys the privileges to directly. If A grants B privileges RUN this stored procedure, when B calls the stored procedure, the procedure runs with the privileges.

  I agree point stew, however, re-creating objects in Oracle is generally a bad idea and a TRUNCATE with one insert direct-path, possibly combined with the deactivation and the rebuilding of the index would be more appropriate than a DEC. If you're going to stick with this Assignment, however, that really do in a stored procedure owned by A while B has no need to CREATE ANY TABLE.

  Justin

• Groups and permissions of the user is added to the local disk post-conversion?

  We currently have a security policy with our Windows servers requiring admins to remove unnecessary security groups and users on the local disks. Basically, the SYSTEM and administrators retain full control, but all other users and groups are deleted for security reasons. We find that during a P2V conversion/clone servers, security groups and users are added to the readers of these new virtual machines (see screenshots below):

  Security before and after conversion. Could this be a function of the sysprep post-conversion tasks that work?

  Until now, we thought that, apart from the usual physical changes inherent to a clone, security remains unchanged. We follow best practices for conversion of these machines (running this as a local administrator account, run this converter installed on the machine, by stopping services as much as possible and so on).

  You can compare it to a system where you don't resize volumes, but all other factors are the same?

  If you reduce the size of a hard disk volume during the conversion, it will make a copy of file by file from the source to the destination devices.  We may have to add permissions for the conversion process, but I don't know if it is real.

  If you maintain or increase the size of the hard drive, it is a clone of block level which should be a bit-by-bit copy the source system.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How can I check if a user belongs to a certain group of field and see what are the permissions that the user has on a specific group "administrator, user and guest"?

  I can't check in a group of area if a user is "administrator, user and guest.

  I'm using labview 2012 in the windows domain.

  I think that there are tools. NET to resolve this, but could not yet.

  Attached a file that checks if a user belongs to a group in the area, but without the information of privileges.

  In the past, I used the command line.  Use ' Net User % username / Domain % domain % ' to get information about the user.  Actually, I don't have the right to see the other commands, so I don't know how it works now.  .NET looks more elegant, but I never used it for that.

• Administrator - changed the permissions of the user for time/Date, installing software, etc.?

  One of our work computers has been restored to the factory settings (previously XP Vista now) and have since the re-installation of software and connect to the network driver (server). However, user seems to have a restricted access IE: cannot change the time/date, impossible to install the software, a vision limited in Adobe, etc.. Could you please tell process changes or authorization required by the administrator to allow the user to access these functions?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Directory on Windows 7 Enterprise security cannot add new permissions to the user for users already in AD domain 2008 R2.

  It is a network extended, connected by virtual private networks Adtran.  I am the administrator of the system.  We have recently upgraded to two Active Directory to Windows 2008 R2 servers.  These servers do not have the error event and dcdiag does not show any problem.

  One of the nets under distance I can RD in the main location that includes the ad servers.  Back in my Windows 7 Enterprise customer is part of the field and is quickly recognized if I withdraw from the field and add it. The computer network browser service pulls up the computers in the domain and I connect quickly to the actions.

  What does not work, it is if I go to a folder on a local drive and you try to add a user or change the property.  After you enter a member user in the dialog add user to search for the user in AD, I get the correct authorization box to allow access.  After you correctly enter the administrator credentials that I just get the wheel turning, the organizers can't even process time out, I have to manually close the task.  Under certain condition, I get an error "com surrogate does not" and "cannot open access control editior.

  Norton 2011 is running and AppLocker is on.  However, this used to work before moving on to a 2008 R2 de Windows Server 2003 ads.

  Any help would be appreciated.

  See you soon,.

  Alan

  You should ask this in the Technet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to take the permissions of the user account for my external backup hard drive, incase of my computer crashed?

  Original title: backup of user account permissions?

  Hello

  I put permissions to my external hard drive so that it is accessible only by my account. For everyone, access is denied. I want to save permissions, in case my computer breaks down. How can I do this?

  I have only set permissions, not encrypted the files on the disk.

  Hello

  I will certainly help the question of fixing.

  Taking backup of permissions is not possible from your computer to an external hard drive. However, you can set a password for your external hard drive, so that you can access it from any computer that has administrative privileges by entering the password.

  For reference:

  Overview of BitLocker Drive encryption

  http://Windows.Microsoft.com/is-is/Windows-Vista/BitLocker-Drive-encryption-overview

  I hope that the information above helps you.

• List of the permissions of the user

  Hey everybody,
  
  Is it possible to see a list of users, indicating who has access to what, etc. in OBIEE 11 g. ? Something like the report of the Permission of the administration tool (although that as far as I know, this only shows the columns of a presentation layer, not reports).
  
  Any ideas?
  
  Kind regards
  
  C.

  Hi Cihan,

  It's an interesting question regarding permissions. I open the Catalog Manager with weblogic user on the BI server offline and are not error.

  The ACL (Access Control List) will show users/groups with specified in Catalog Manager. The screenshot below shows the values of the ACL for the columns of a report in an environment of vanilla (with sample Apps Lite data).

  http://i45.Tinypic.com/21b7na0.PNG

  If I go in presentation services and in the web version of the Catalog Manager, I can see the permissions: -.

  http://i45.Tinypic.com/2ykmddc.PNG

  If I add a permission to a user groups / roles/catalog named application is what is stored in the ACL. I added the "weblogic" username to the list of permissions, this change can be seen in the report:-

  http://i47.Tinypic.com/qnwlfo.PNG

  It is generally not a good idea to share content at the level of the named user, usually added a huge management overhead.

  Catalog Manager reports do not cascade on users within groups, you'll need to extract the members of the group separately and to search for them (for example in Excel).

  Please check all the comments that have been helpful / provided the correct answer.
  Andy.

• Permissions of the user - advice?

  We are working on board some users in a different region (1 super user and several standard users). Any advice on how to work through the exercise? I found a doc of security group permission but do not know if there are other resources that might help.

  ldfarah-Oracle

  My go - to resources would be as follows: http://topliners.eloqua.com/docs/DOC-3891 and this: http://topliners.eloqua.com/docs/DOC-3986 and this: http://topliners.eloqua.com/docs/DOC-3904 - let me know if it feels like it covers things (or not). I'm more than happy to keep digging.

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/