Permissions of the user - administrative permissions

Similar Questions

• the user administrator access denied

  the following error occurred during which to save properties for user administrator
  access is denied

  You are a member of the Administrators group?  You need administrator privileges to run the task.

  John

• Profile of user doesn't have logon for the user administrator

  All of a sudden, I can't sign the administrator.  I've already restored to earlier date.  don't know what to do.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I remove the icon of the user 'administrator' on the desktop, but not to delete the user?

  When booting this computer I want only the user "guest" to appear.  This is a computer that is accessible to the public in a hotel.  Is it possible to do that without losing the 'administrator '.  The "guest" does not require a password, which is required for the 'administrator '.

  It's the solution found at: the Windows TechCenter Web site: hide users on Windows 7 Logon accounts

  1. Click Start-> Run-> secpol.msc
  2. Navigate to local policies-> security options
  3. Look for the entry "Interactive logon: do not display last user name" and active defined.
  4. Restart the machine.

• Provide for the user administrator rights

  Hi Experts,
  
  I'll add a new user in an instance. what I need to do, is I want to give administrative rights for this new user. Can someone give the solution for this. I have to give admin right is in RPD or presentation services?

  Your condition is still unclear.
  because you don't me of the catalogue or SPR admin rights should be applied to this user?
  What exactly are you requirement?

  If you want to connect to RPD with this user, it must be he added to the Administrators group in the RPD

  Now, log in to the service of presentation, go to manage users and groups option under settings > Administration...

  Add this user to the catalogue of presentation server administrators group...

  It could be that useful...

  Note: To add this user to the Administrators group of the catalogue, that the user must connect at least once on the presentation service, then only this user appears in the list of users when adding...

• Failed to connect to the host as the user administrator

  Hi all
  I am not an oracle DBA, but must fulfil a task on the oracle server.
  
  
  Hi all
  I have a problem when you use host of credentials (operating system login
  credentials) for utility like backup, recovery setting.
  When I entered the username and the word occurred then as 'connection '.
  "to the host as a user 'username' failed: ERROR: wrong password for the user.
  
  The user name and the word is true, I used it to connect to (my windows
  window is Windows XP Professional)

  Chop the line ' NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)' know-how ' #NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)', then try the fourth step described above.

  Kind regards
  S.K.

• Query the user administrator/root password

  Hi all

  Is it possible to ask a user for a password for the administrator (Windows) or root (Linux) on the "new application" accounts form which you can then use to set the password for the respective account on the vCAC deployment plan?

  Thank you

  Danny

  After a bit of research (Google), I came across this very useful blog that solved my needs: -.

  http://extendingclouds.com/2014/04/28/how-bout-we-let-users-set-their-default-Admin-or-root-password/

  Danny

• How can I remove the user administrator of the Windows login screen?

  original title: remove the icon to login for administrators

  How can I remove the administrators of the journal icon on the screen? I have an icon with privileges administrators on the log on screen

  Please take a look at this, could provide more insight into:
  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-CtrlAltDelete-for-Vista-logon-screen/

• I forgot windows log password and cannot log in with the user or administrator

  I forgot windows log password and now cannot connect.  Tried the user administrator connect you, who did not have a password and was not able to connect with either.  I'm the only person using this computer.  Help, please.  Thank you

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• I have windows xp home edition. Last week after windows automatic update and restart, I lost the logo of the user on the Welcome screen.

  The right side of the Welcome screen is just completely empty.  No logo user, I can't in my computer normally.  I found, I could get around this by Ctrl alt del, but this makes me as a 'guest' and I can't access all the controls or updated windows help, which apparently requires the user administrator status.  How do I trouble this mess and get my normal connection?

  GOOSE,
  Here is the information on the Safe Mode.  Here is the information on the login for the administrator .  I hope this helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get fullname of the user after login

  Hello.

  I'm developing a simple web panel with the vCloud API readonly information.

  I was able to get information about organizations, vApps, TDC and VMs, but something "simple" that to get the full name of the user logged in using the login process API vCloud is impossible for me.

  Please, can someone give me help on this?

  I use vCloud API SDK for PHP, but I'd appreciate any kind of information or instructions on how to get connected fullname of the user.

  Thanks in advance for you help.

  In order to be able to do this you will first need to connect to the organization with the user "administrator of the Organization" and record the information about users somewhere - in a database, or some kind of in-memory cache. You can't get much information on a normal user to user.

  Users to get information, to get the 'admin' of an organization representation.

  GET https://> /api/v1.0/admin/org/>

  When you make the request in the response above, you will find a section

  After that, you do a GET request for each user and read the information. Save it somewhere and use it later.

  GET >

• How to give permissions to the user for the administrator.

  I work in an organization. We use Windows XP with SP2. I delete the administrator user rights. At that time, some user systems have it problems.that's files and folders are not able to move, copy, cut, delete, all permissions are deleted. Please tell me how to give these permissions (move, copy, cut, delete) for the user's systems.

  This article explains how to set file access permissions:

  "How to set, view, change, or remove special permissions for files and folders in Windows XP"
    <>http://support.Microsoft.com/kb/308419 >

  HTH,
  JW

• How can I check if a user belongs to a certain group of field and see what are the permissions that the user has on a specific group "administrator, user and guest"?

  I can't check in a group of area if a user is "administrator, user and guest.

  I'm using labview 2012 in the windows domain.

  I think that there are tools. NET to resolve this, but could not yet.

  Attached a file that checks if a user belongs to a group in the area, but without the information of privileges.

  In the past, I used the command line.  Use ' Net User % username / Domain % domain % ' to get information about the user.  Actually, I don't have the right to see the other commands, so I don't know how it works now.  .NET looks more elegant, but I never used it for that.

• Administrator - changed the permissions of the user for time/Date, installing software, etc.?

  One of our work computers has been restored to the factory settings (previously XP Vista now) and have since the re-installation of software and connect to the network driver (server). However, user seems to have a restricted access IE: cannot change the time/date, impossible to install the software, a vision limited in Adobe, etc.. Could you please tell process changes or authorization required by the administrator to allow the user to access these functions?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.