¿¿permit system?

Similar Questions

• How to assign the permit system to a page

  I confess that I am clearly missing something, but I've spent the last hour by clicking on the attempt to add a schema authorization to a page - quick easy answer, surely?
  
  I'm in the definition of the Page and by security section, I saw and create buttons, but all this doing is either see my created authorisation schemes, or create new ones - do NOT connect them to this page.

  Page > edit > authorization

• The SDCard permissions

  I'm developing an application that needs to read the fair of the SD card files, and there is no problems while using the simulated device, but when I try to test the app on my Curve 8310 whenever a file is accessed a message asking for access to the file is shown, and I'm shure set for allow permissions to the application.

  I tried to use a code from the forum:

  Permissions ApplicationPermissions = new ApplicationPermissions();
  permissions.addPermission (ApplicationPermissions.PERMISSION_FILE_API);
  permissions.addPermission (ApplicationPermissions.PERMISSION_INTERNAL_CONNECTIONS);
  permissions.addPermission (ApplicationPermissions.PERMISSION_LOCAL_CONNECTIONS);
  If (ApplicationPermissionsManager.getInstance () .invokePermissionsRequest (permissions)) {}
  System.out.println ("user equal or more permissive settings saved ');
  } else {}
  System.out.println ("the user more restrictive settings saved ');
  }

  This code displays a screen to the start application that I can set permissions, but in any case it is shown that "allow".

  I'm doing something wrong?

  Thank you

  What type of calls do you observe?  Please see this post for more information.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=320&query.ID=1687...

• 57F Update error code

  I DID UPDATE SEVERAL TIMES BUT I GET THIS ERROR EVERY TIME I DO, THE CODE'S 57TH

  Hello Mathew plane,

  Please, give him another chance & perform the procedure below

  Diagnosis: The permissions were incorrect for some registry keys.

  Considerations: I've used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: you should back up your registry and store the backup in a sensitive dossier (see procedure below). You can also create a system restore, just in case. Not sure what anyone in this note? for example the registry editor, permissions, System Restore, registry keys etc change? Check the Microsoft Knowledge base. (I can not take any responsibility on the problems caused by your use of this procedure. I can say only this worked for me!)

  FIX: You * may * be able to use to Repair Office 2003 to identify the keys to the problem and then use the Registry Editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (Start > run and run regedit).

  3. in the registry from backup of your registry Editor (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the Retry button.

  9. If the error prompt is replaced by another invite for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11 when all the keys have been updated and the repair finishes and then close the registry editor, then try Windows Update again.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

  I hope this helps.

  [If this post can help solve your problem, click on the button 'mark as answer' or 'useful' at the top of this message. [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  -

• DESKJET 3636: Once again, problems with drivers, ob! DESKJET 3636

  Here we are I am still here to complain for the installation of the drivers, this time with Win10 and a new printer, but the same question that in past. It seems that HP engineer have used bad and strange to pursue a way to write the drivers which conflict with end version of Windows, and I think it's a problem of permissions... but really hard to solve!

  As a result, I'm losing so much time to solve the problem and considering the installation of a printer, it's a matter of 5 minutes I'm really pis * d stop!

  Please read carefully: the printer works, it can print wusing ePrint service and it can print the laptop if I print from Notepad! Only with Notepad! Please avoid issues like "the printer has an IP address?

  The printer is connected to the WiFi, I installed the drivers, the basis and him full, nothing has changed: it allows to print a simple txt file, but it cannot print images 'graphic', Word, same Windows print test page button returns an error.

  When I start the HP software doctor he reviews "solved" a problem (the first voice of the list) and then, if in this application, I press the button test print, the printer prints! But after that he keeps does not not with the PC.

  I can't change the port TCP (errors), I can't change the permissions (System is proprietary, and I can't change it too), for some users, printing is disabled!

  Of course, I deleted the drivers, reinstalled, rebooted the PC, do not ask stupid questions. Also updated the firmware of the printer, nothing has changed.

  Why work so complicated fo HP to make a 'normal', easy to install driver and (especially)? I'm wasting time only here, too bad!

  What can I do? Please respond here in no time! Last time I lost 4 weeks after you changed the printer and the problem also appears in a new! I needed to spend money to call a high-level specialist who, after 3 hours and different call solved the problem. In my opinion is ho windows manage permissions and allow some services! It's huge relevant so that you understand this problem!

  Thanks for the reply but it has not been a solution useful, too easy and drivers have problems during installation on the system.

  I changed a few settings in the printer settings, the most important I've invited was the printer 'sharing', after I maybe had the chance to access/change come voice as the port.

  In port I selected the HP protocol instead of microsoft

  in advanced settings, I selected auto-tuning

  I have the double selection of voices on this printer, but is not serious it works!

• Windows Update 57F error code!

  original title: 57F error code!

  I'm trying to update my windows vista 2007, 32 operating system. There are 23 updates that are needing to do. However whenever I try to update it comes up with error 57F code. Help, please. I tried several times!

  Please, give him another chance & perform the procedure below

  Diagnosis: Permissions were incorrect for some registry keys.

  Considerations: I used this for Vista Ultimate SP1 and Office 2003 SP3. A similar procedure may work for other versions of office and Windows, I don't know.

  You need to be reasonably computer or ask someone who is. You will need the installation of office files.

  Important note: you should back up your registry and store the backup in a sensitive dossier (see procedure below). You can also create a system restore, just in case. Not sure what anyone in this note? for example the registry editor, permissions, System Restore, registry keys etc change? Check the Microsoft Knowledge base. (I can not take any responsibility on the problems caused by your use of this procedure. I can say only this worked for me!)

  FIX: You * may * be able to use Office 2003 repair to identify the keys to the problem and then use the registry editor to change the relevant key permissions:

  1. connect to your computer as an administrator (if you can install programs, it is likely that you are an admin).

  2. run the Registry Editor (start > run and run regedit).

  3. in the registry editor back up your registry (select the top node of the computer, and then click file > export, save the file somewhere sensitive.). (Do not close the registry editor, yet).

  4. run a repair for Office 2003 (see relevant Microsoft KB).

  5. When you get an error in the repair process using the registry editor, find the EXACT registry key named on the command prompt (using the easy to find, Ctrl + F4 and F3 to repeat).

  6. right click on the key and select permissions on the shortcut menu.

  7 set the user groups to enable total control and reading (click OK to save the changes).

  DO NOT CHANGE A KEY UNLESS IT IS EXACTLY THE SAME AS IN THE REPAIR LINE.

  8. in repair, click the retry button.

  9. If the error prompt is replaced by a different prompt for a different key then the fix worked. Repeat step 5 above for the new registry key.

  10. If the error reoccurs prompt then repeat step 6, but assign another likely group of total control, for example the system.

  11. when all the keys have been updated and the repair finishes and then close the registry editor, and then try again the update of Windows.

  12. If this does not correct the problem, then you must restore your backup registry file.

  PostScript: If you experience system problems after that you can restore the registry by double-clicking the registry file that you saved. If you can not do a repair of Office or run the registry editor, then you may not be an administrator.

• OfficeJet Pro 8100: Officejet Pro 8100 won't print color after update software on Mac

  I have a MacBook Air with OS X (Yosemite 10.10.3)-.

  When I connect the printer via USB, I was able to print by using the generic drivers on the machine. However, as expected, update software detected an update for HP drivers - I installed.

  And now the printer does not print in color. I checked every setting I can think, but it is still printing in black and white.

  Any help would be appreciated!

  Welcome to the @mandikayencforum!

  I have read your current position and the previous thread on how you were not and are not able to print in color from your Mac running 10.10. I saw that already test pages were color printing and would like to know if the test always pages print in color. If they do, a matter for the Mac somewhere, and I have some suggestions for you to do below. If the test pages no longer print in color, please let me know! If the printer is not printing in color when you print test pages, there is probably a problem of cartridge or printer hardware problem.

  1. follow the same steps of @Waterboy71 on your other thread here to reset the permissions system disk and repair of printing: Re: Officejet Pro 8100 refuses to print color (OS X 10.9)

  2. If you still do not have the ability to select the color printing on your Mac, try the procedure described in this post from wisgirl64: Re: won't print in color from my Mac or iPhoto for HP photosmart D110

  If you find that the color print test pages, and the Mac does not give you the options to choose color printing, I suggest getting in touch with Apple support experts to see if they can help fix the problem of the OS X.

  • Apple support communities

  If you like my answer to you today, click the thumbs up below!

  Happy Friday!

• Why have I permission to open my files? I'm the only user on my computer.

  I have used all versions of windows except Vista and I am amazed by the level of intrusion of Windows 7.  I have an external hard drive that has been the essential motivation of an old laptop with Windows XP SP2.  I keep all of my old photos, music and various junk in it.  Tonight, I was feeling nostalgic and wanted to look at the OLD photos for years (which were originally on a Windows 98 computer).  Never, I have placed restrictions on the files on this disc.

  Windows 7 says I'm not allowed to open more than half of the images.  They're just JPEG files.  ARE YOU SERIOUS?  I have been bothered by this obnoxious 'permissions' system when I met first of all he's trying to move and unpack patches in the directory program files.  Now this is getting ridiculous.  Why can't some images while others are in the same folder?

  Please, if anyone can help me to disable these blocks "permissions" on my computer, it would be greatly appreciated.  I don't care if it make me more vulnerable to the virus, these pictures come from my childhood.  I'm ready to burn this point of sale, I am so frustrated with this garbage.

  How to grant permissions in Windows 7

  1. Locate the file or the folder where you want to take in charge in Windows Explorer.
  2. right click on the file or folder and select properties from the Menu
  3. click on the Security tab, then click the button change. Click OK to confirm the UAC elevation request if necessary.
  4 Select user/group permission windows or click Add to add other user or group (you may need to do this for multiple users - ex: administrator and your own user account).
  5. now under permission section check the rights you want for the user that is to say 'Total control' in the "Allow" column to assign the rights to full access control permissions to the user.
  6. click OK for changes to take effect and click OK again to exit the Properties window.

• Windows 7 GWX.exe

  I wonder why there more and more and more difficult to prevent the installation of this application in Windows 7.  Initially, I uninstalled the update "Update Windows 10" and added to the list hidden in Windows Update.  After a day or two and two or three reboots, this app has been downloaded once again, under a number of different Windows Update version.  I uninstalled again, update, rebooted, and it was gone.  A low and behold, I come to work, turn on my computer, and this update again once, was installed on my machine.  I went in the distant and the creation of false records and executeables, denying permissions SYSTEM and INSTALLER of CONFIDENCE, and yet, this update continues to be an embarrassment.  I legally own my copy of Windows 7, still have the original packaging, and I don't appreciate having your Windows 10 advertising constantly displayed on my screen, even though I removed and taken measures to prevent its installation, only to have reinstalled it against my will.  I tried Windows 10, and I can tell you I will NEVER update, as I have no interest in seeing you AD polluted, hacker built, joke of a BONE.  My Windows 7 computer, is not yet able to run Windows 10, the older nature of his equipment, specifically a motherboard chipset which has a default, who has never treated for my motherboard, so WHY AM I SAW YOUR announcement MICROSOFT?

  Block 10 upgrade Notifications and regular windows
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/block-the-Windows-10-upgrade-and-regular/c6009661-94cf-4d46-9630-419ea07b5fde

   

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• Windows 7 search () still does not work.

  Although I followed other dialogues forum on the subject and tried all the suggested solutions, Windows 7 Search still does not for me. It will be as stuff in Control Panel etc, but never files and documents.

  Here's what I've done so far: -.

  1. Run the troubleshooter of Search & Indexing, say things that I can't find the files or by e-mail. It detects any problems.
  2. In Control Panel / programs and features, I checked that Windows Search is turned on. (The Indexing Service is turned off).
  3. In Control Panel / folder Options, I checked that the default values of the research are defined.
  4. I tried to rebuild the Index in Control Panel / Indexing Options.
  5. I looked for the wandering registry key mentioned here: http://social.answers.microsoft.com/Forums/en-US/w7files/thread/cc378149-8765-498a-9480-b1b494e1a1a9 my system does not have it.
  6. I checked that the files (for example, "My Documents") have set of permissions system.
  7. I tried to switch to a different account username and research, which also do not work.
  8. I compared all the settings on my desktop PC (that has the problem) with my laptop, which is also running Windows 7 Home Edition, and on which the search works very well. They are all the same.

  What can I try?

  Hi, Rob.

  I worked my way through all the tips, but could not solve the problem. (I do not stop my AV - Avast - as it is also used on my laptop, which has never had a problem.) Finally I, reluctantly, created a new profile and copied all my files across, and search now works as it should.

  Best regards

  Richard

• Take possession of the System32 folder

  I have problems to install things like Visual Studio, the GPU drivers, printer drivers, file transfer from desktop to a folder on the desktop do not let me use or delete the new file, update Windows Defender and who-knows-what else that gives me an error immediately. Understood the problem with the GPU drivers by taking possession of the 'pilot' and 'DriverStore' files in the System32 folder with 'Appropriate' in the context menu. My old PC is running the same OS without any problem at all.
  Tried to buy permissions System32 the usual way, but I get an error. For the "pilot" and 'DriverStore', I used the context menu. It works, but it gives me the permissions (Administrator) AND I (users) defines as the owner. I just want to have permissions to change (installation, etc.) things and let the owner of the same. Now, the owner is not the same thing in other folders. SYSTEM and TrustedInstaler all the way with different permissions for them. Generally 'Users' have 3 permissions, 'Administrator' has 0 permissions, 'TrustedInstaler' has 1 authorization, "CREATOR OWNER" has 0 permissions, 'SYSTEM' has 0 or each authorization. Sometimes, there are even my username with 0 permissions, but especially it is not at all here.

  I already tried to solve crash Visual Studio start in a forum: http://social.msdn.microsoft.com/Forums/silverlight/en-US/7703213f-6977-4e51-a4ea-8c2835b5d383/visual-studio-2012-express-for-desktop-crash-after-startup
  but they pointed me here. Now, I know for some that this mess of property is the problem in all.

  1. is it safe to take ownership of the whole System32 or even Windows folder?
  2. how to set full control in permissions without getting an error?
  3. as a last resort: if I format my HARD drive and do a clean install, will this problem persists? Or is there a way to prevent it from happening?

  1. is it safe to take ownership of the whole System32 or even Windows folder?

  -> No, this isn't. This could destroy your system.
  
  2. how to set full control in permissions without getting an error?
  -> You do not because he didn't need to. To install the software, right click on Setup, then click "Run as Administrator".
  
  3. as a last resort: if I format my HARD drive and do a clean install, will this problem persists? Or is there a way to prevent it from happening?
  -> It's a perception problem that does not exist when you adopt methods applicable to the installation of a program.
  In other words: leave the Windows folder and its subfolders only.

• I need to adjust the settings of group policy

  Recently, we received two gift PC running Windows 7 Professional.  Even if I used many versions of Windows for more than 20 years, I'm not a qualified administrator.  The donor said that each had been implemented to limit the ability of users to access all storage devices.  This is required by the policy.  In particular, users are only to be allowed list, read and read and execute permissions of files on the hard drive.

  I tested a user account and found to my dismay that users could, in fact, write files on the hard drive.

  I also found that the USB drives were not available in my account and the user account.  This is required for users.  However, as an administrator, I need to use these drives from time to time.  I fixed that by editing the registry by changing the value in HK_LOCAL MACHINE\SYSTEM\CurrentControlSetServices\UsbStor 4-3.  Later, I found I could open gpedit\Local computer local\modeles Templates\All settings and click on all removable storage Classes: deny all access.  The options available were not configured, enabled (selected) and disabled.  I disabled it.  (I know I have to reactivate when I'm finished.)
  In addition, I found that the optical drives were inaccessible in my account and the user account.  Again, it is also mandatory for users.  I need to use this disk to install the software.  I went to the register to HK_LOCAL MACHINE\SYSTEM\CurrentControlSetServices\cdrom and Enum.  Nothing jumped out at me, so I did nothing.  I searched gpedit for setting I could use but found nothing.

  I consulted C:/properties/security and found four names or groups, of which two were user names.  Permissions for them are limited to read & execute, list the contents of the folder, and read.  These seem to be default settings.  The permissions system and included all items except special permissions administrators.  All this order seemed to be in.

  I clicked on advanced and click on the tabs of the permissions and effective permissions.  A number of line items have been shown.  I decided that I didn't have enough to make changes.

  So users are properly restricted from removable media and removable drives but they have rights to write to the hard disk, which they should not.  I am unable to use the optical drive.

  Is there a way I can fix it all?

  1. is it possible to block and unblock the internal optical drive?

  Run gpedit.msc policy editor and check its many options. It is probably one that allows you to do this.

  2. is it possible to effectively limit the use of the disc hard as game comes in my post?

  The normal operation of Windows requires write access to the hard drive. Without write access, Windows will not work. However, you can set your own permissions to prevent write access to specific folders or folder trees. To access permission settings, right-click a folder, and then click "Properties".

• Error DataPump

  Hello

  I have a DB Oracle performed 11.2.0.3 on Solaris, SunOS Unix server I want to transfer to a new server. The destination server is a server of 2012R2 of Windows I have installed Oracle 11.2.0.3. I created the tablespace and data files on the new server and they are identical to those on the UNIX server.

  I ran:

  Create directory export as ' / mnt/terstation/backup ';

  Grant read, write on exporting directory to the system;

  Datapump_exp_full_database grant to the system;

  Who created the directory and gave the permissions system (I guessed they would have them already but wanted to make sure)

  Then, I realized the export:

  complete system/PASSWORD@INSTANCE = directory expdp export dumpfile = test1.dmp logfile = test1.log = y

  Then I copied this export to the new server and ran:

  Create directory import as "C:\Import".

  Grant read, write on the import directory to the system;

  Datapump_imp_full_database grant to the system;

  Complete system/PASSWORD@INSTANCE = directory Impdp import dumpfile = test1.dmp = y

  I am then presented with 17931 errors, some aspects are created, but not all. I would expect errors trying to create a tablespace which already exists, but others, I am not too sure. I was under the impression that an impdp would bring everything everywhere

  I have used the full backup script but its 5000 lines long, are the main errors I get:

  Treatment of type of object DATABASE_EXPORT, GRANT, SYSTEM_GRANT, PROC_SYSTEM_GRANT

  DATABASE_EXPORT/SCHEMA/SCHOLARSHIP/SYSTEM_GRANT processing object type

  ORA-39083: Type as system_grant cannot be created with the object error:

  ORA-01917: user or role 'EFINR' does not exist

  Because sql is:

  GRANT CREATE TYPE TO "EFINR".

  ORA-39083: Type as system_grant cannot be created with the object error:

  ORA-01917: user or role 'SCHEDULER' does not exist

  Because sql is:

  GRANT SELECT ANY DICTIONARY "PLANNER".

  ORA-39083: Type as system_grant cannot be created with the object error:

  ORA-01917: user or role 'SCHEDULER' does not exist

  CREATE THE SEQUENCE "EFINR". "' BPC_G03_SEQ ' MINVALUE MAXVALUE 1 9999999999999999999999999999 INCREMENT OF 1 START WITH 1 NOCACHE ALL NOCYCLE

  ORA-39083: object of type THAT SEQUENCE could not create with the error:

  ORA-01917: user or role "does not exist

  If I check the schema on SQL Developer browser, some have appeared, but "EFINR" isn't there. Why would he not import that too? It concerns access rights?

  Any help is great, I can download more if necessary

  See you soon

  Hello

  A proposal, it seems that your tablespace name can be in different cases and maybe it's the cause

  I think you have created SCHEDDATA but the original tablespace is schedDATA and that is the question.

  create object names in oracle in different cases is generally a bad idea (it is only possible if you double quote mixed case).

  You have 2 choices, if this is the case

  (1) create the tablespace named mixed case using "schedDATA" as name

  (2) make a remap_tablespace to schedDATA to SCHEDDATA - thi must work you just need to have appropriate quotes.

  See you soon,.

  Rich

• Advice on permission

  I have an app with the authorisation regime, i.e., anyone with a connection can see everything.

  So far, I applied this system to all pages, buttons, menu items and report links.

  How deep is the recommended authorization?

  Should I apply it to the regions and elements as well?

  Any advice appreciated

  Gus

  
  

  If you have no particular prescription, I would say, without authorisation schemes are needed. Once the user connected, he sees everything, he can access everything. Adding permission will add an additional charge.

  In our APEX applications, we have authorization based on roles, i.e. some pages / components are only available for certain roles. So what we are doing...

  • If the page must be accessible to every one authourization - then no
  • If the page must be accessible to only to a role or set of roles - generic authorization at the page level (by storing info page-role in other DB tables. You can access: APP_PAGE_ID at the time of the permit system, so you can have a generic authorization for all pages. ) + Authorization for the Navigation components like list, tab etc.
  • We apply the "authorisation scheme" to buttons/regions only when necessary. for example all the roles that have access to the page, do not access to all components of the page. Perhaps, some of the buttons should be available to a single role.

  Kind regards

  Hari