Persist cache dedupe 'freezes' Appassure

Similar Questions

• Bridge CC asked to purge the Cache but freezes when I try to do

  Use the bridge on a Mac. Whenever I open the bridge, an error message appears asking to clear Cache via preferences - but when I try to do, it freezes.

  In fact, even before trying to clear the cache, if I try to navigate to a different folder on the bridge it freezes also.

  Ransacked the bridge, he downloaded again and reinstalled - problem persists.

  What should I do?

  If the cache is large, the purge can take some time. But I guess, to 'freeze' you mean it won't thaw more.

  Try using a different cache folder location.

• Bridge CS6 Cache and freeze problems

  I downloaded Bridge CS6 and I wasn't able to use it yet. I'm on a MacBook Pro running 10.7.4 and whenever I run the Bridge application I get the following error:

  Bridge has encountered a problem and cannot read the cache. Please try to purge central cache in the Cache preferences to correct the situation.

  When I try to purge the bridge cache freezes. If I try to purge the cache I can't access all the files on my computer and it just hangs. I finally force leave her to get out. So far, Bridge CS6 has been completely unusable.

  Help, please.

  Thank you.

  When I go to ~Library/Caches/ there is a folder for com.adobe.bridge5 but he is not one for com.adobe.bridge6

  Your in the right folder. Follow the path you discovered yourself using the pref settings what Curt suggested

  CS6 ~library/caches/Adobe/Bridge and inherent should be 2 files:

  Cache plugin Adobe Bridge

  and the folder called Cache. Inherent should be 4 folders called ' 254 ', ' 1024', 'data' and 'full '.

  All of these files are the quality content respective to the thumb and preview as well as 100% of cache and database of bridge.

  Anyway, since you have not used bridge you have no amount concerned the cache and I would say you leave the two PS and bridge and manual to remove the two elements (Plug and folder called hidden at the end of the above mentioned Bridge CS6 path.

  (the two files are going to freshen up after a restart of the bridge).

  To be on save her side also visit in the same user Library Preferences folder and locate the file called "com.adobe.bridge5.plist" (Yes, that's 5 Bridge that comes with CS6 all Adobe applications have their own version number, they are presented in the same version of the Suite. CS6 has PS version 13 and Bridge version 5)

  also, drag this file to the trash.

  Then hold down the option (alt) key while from bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.

  Choose Reset prefs, then try again.

• Protect kernel Appassure

  Just a quick survey.

  That you guys use to protect your servers based?  (Not the repository)

  Config?

  Be cached?

  installation?

  Appassure can protect themselves?

  Hi Fredbloggs,

  1. when each Dell-AppAssure Core update is back up its registry (which contain the main AppAssure Dell configuration). You can find it here C:\Program Files\AppRecovery\Core. File 'CoreBackup_ [timestamp].

  2. There are two cache dedup copies. Original - backup and PrimaryCache - SecondaryCache. You can find it here C:\ProgramData\AppRecovery\RepositoryMetaData.

  Also you can change the secondary primary or\and path dedup hide via - AppAssure Core UI. Setup tab-> settings-> Cache deduplication - Basic Configuration > change

  

  3. you can find the installer here C:\ProgramData\AppRecoveryInstallerCache cached

  Thank you

  Anton Kolomiiets.

• The BI server cache

  Hello.
  I'm just trying to understand a few things about the BI server cache.
  
  1. is there a time-out for the server cache BI which means how long it keeps the cache and when it should be deleted. Y at - it all the parameters that can be set to determine when the server cacahe BI expires.
  
  2. when clears it BI server than the cacahe y at - it an order in which it gives off the sense cacahe if she has 10 inputs and reached a limit how he chooses only 10 entries to remove. How to determine which is deleted.
  
  All documents pointing to the same thing with useful as well.
  
  Thanks and greetings

  Hello

  In the case where if the time persistent cache is defined at the level of the physical table, then the cache associated with this table will be deleted after the time interval specified. Another stratergy to remove the Cache is using the events polling mechanism. There are also other ways to purge the cache. In addition, according to the value set for MAX_CACHE_ENTRIES in the NQSConfig file, the cache entries are replaced based on the algorithm least recently used (LRU).

  Below are the links for more details:
  http://555obiee.WordPress.com/category/OBIEE-cache-management/
  http://OBIEE-tips.blogspot.com/2009/09/OBIEE-query-caching.html

  Documentation:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyInConfig/AnyInConfigNQSConfigFileRef7.html#wp1005221

  Thank you

• Batch file or scripts to automate running the cache?

  Hello gurus,
  
  I'm new to OBIEE and trying to learn how to automate hides...
  
  I got to know that we can automate the cache for the purge by running a batch file or script... outside the purging of the cache by checking the time of persistent cache for individual objects.
  
  I also read the documentation for the purging of the cache as the use of the ODBC extension functions... such as SApurgeCacheByQuery, SApurgeCacheByTable, SApurgeCacheByDatabase, SApurgeAllCache... But how can we get these functions?
  
  Someone can explain on the automation of the cache or can someone give all kinds of web links or reference?
  
  Thanks in advance...
  
  Published by: user12269190 on April 30, 2010 14:35

  http://CatB.org/~ESR/FAQs/smart-questions.HTML#before

  First result when I search "obiee clear cache" on Google:

  http://obiee101.blogspot.com/2008/03/OBIEE-manage-cache-part-1.html

• Why in-memory data cache lost consistency?

  Yesterday, I started a server storage-enabledcache by running cache - server.cmd and launched a cache disabled storage console by running coherence.cmd.
  Then I registration puts in cache the following commands to enter data in consistency:

  cache(cb)
  put a a
  put b b
  put c c
  put d d
  put e e 
  
  Map (cb): list
  c = c
  e = e
  a = a
  d = d
  b = b

  But when I run the command of the coherence command line, the output list today "null."
  
  Why the lost data?

  She was deported by the cache expel political. The reason is the caches you created were not persistent caches.

• Caching problem

  Hi guys,.
  
  I am facing this problem of purging the Cache of the everydat repository manually.
  
  Is there a mechanism through-whihe I can purge the cache automatically after a day or after a certain size of Cache?

  To purge the cache automatically, you will need to set the time of the cache persistent in the present tables in the physical layer. There, you can mention the time after which you want to purge the cache. The steps are described below:

  1 double-click on the table in the physical layer.
  2. Select the general tab.
  3. Select cached.
  4. Select the time Persistent Cache.
  5. specify the time interval when you need to refresh the cache.

  You must do the same for all the tables for which you want to purge the cache.

• Rendering of the HTML5 Canvas

  This is regarding the rendering of the scene animation HTML5 Canvas (animate CC).

  The rendering of the animation is slow on the Windows operating system. And rendering animation is not smooth on browser.

  Please provide any solution for this.

  Few things to note everything by publishing your files to HTML5 canvas target.

  1. the filters and effects of color on the symbols are very expensive by the calculation and are cached (automatically) while rendering. Try to reduce as much as possible these as they will cause the internal animation within any symbol of caching to freeze.

  2. try to use the Cache as Bitmap to the complex static vector shapes wherever possible.

  3 try to minimize acceleration in the classic tweens.

• CS6 bridge will always open with this alert:

  Despite the fact, I check the preferences of each time. Mac OS 10.10.4 and Bridge CS6. Thank you

  Hi hidolly,

  Could you please check the thread below which may help you:

  Re: Bridge CS6 Cache and freeze problems

  Concerning

  Sarika

• Dedup Cache and 6.0

  I was sure we were told on the forums beta 6.0 would move its dedup ram the disk cache (the beta forums are no longer available) I remember this because dedup cahce settings and ram usage are huge problems for our customers and sites

  But it looks like 6.0 always use RAM, can anyone tell me why this was changed or was it only related to r3 rest?

  Voltmeter digital dedupe cache will always be in the RAM memory (DVM is the current repository engine).  Backup copies are stored on the disk and updated every hour (by default), but it runs in RAM for faster access.

  The repository of R3 (which was intended for the 6.0 release, but was delayed) will manage deduplication differently and will not store a cache of deduplication in RAM as DVM. At this point, it's all the information I have about R3.

• Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  Hello I am trying to download my site www.novopro.co.uk screw "Publish to FTP" I have updated a page and downloaded from the website and now I get this warning on everypage. Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. If I click ok the site will load, but I get this error on everypage. I removed all widgets party 3 E, g, engines search, galleries etc.

  I looked through the forum, but not seen no real solution to the issue, I looked at the 'Muse.assets' in the JSConsole and the only script to update is touchswipe.js I do not understand why its doing so, my host said there is no problems with the servers smd ive only uploaded the site (all files) several times.

  My client is now a little inpatient as im yet to find a solution and I'd like to solve this problem as soon as possible. Please can someone help me shed light on the issue and im using the latest version of adobe Muse. Adobe Muse CC 2015.2.1

  Thanks in advance.

  In addition to what was suggested above, you can see if there are other solutions in this doc "some files on the server may be missing or incorrect" Warning Message that can help you and let us know?

• Why an old version of a site persists even if the cache is cleared?

  old version of the 2 sites persist over even if the files on the server are updated and even if some images are not on the server. But they always show also. Empty the cache does nothing. I can go to the server and open the files and they are new. There is nothing of the 'old' he - I deleted the entire site and reloaded with the new, but the old site ceases to reveal nothing new - help and thank you

  Hey all - it seems that there are 2 versions, sitting on the server at Shaw - alone that is active. I found this in their management of account and not by DW ftp application (which is not the right files by the way).  Trying to understand why the news is not overwriting the old, but probably a mistake in the address - my bad.  Thanks a lot for your help.  I think I can take it from here.

• I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

  You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

  Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

  If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

  There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

• I always get this message: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  It seems to happen whenever a update of Muse coming...

  I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I use the latest version of Muse: 2014.3 release

  I looked at my list of assets within the Muse - nothing is marked not linked.

  I tried to upload my site many times... within the Muse and with FileZilla.

  Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again.  It works and can be seen here: www.snapscene.ca.

  But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.

  What gives?

  -Adrian

  It seemed to me the solution.

  When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.

  Manually, I went into this folder destination and destroyed all the old files exported.

  I then re-exported the files and then uploaded. All workes from there.