PERSONALIZED DOCUMENT over the internet file name convention

Similar Questions

• Open the document in the plugin file format blocks Illustrator

  Hello

  I am trying to open an EPS file in a File Format of plugin GoFileFormat() Manager, the following code.

  AIDocumentListSuite * sAIDocumentList = nil;

  AIDocumentHandle document;

  message-> d.basic-> AcquireSuite (kAIDocumentListSuite, kAIDocumentListVersion, (const void *) & sAIDocumentList);

  (error = sAIDocumentList-> Open(ai::FilePath(ai::UnicodeString("D:\\MyFile.eps")), kAIUnknownColorModel, kDialogOff, false and document);

  message-> d.basic-> ReleaseSuite (kAIDocumentListSuite, kAIDocumentListVersion);

  The file is opened and displayed correctly, but as soon as the handler returns, Illustrator crashes. In fact, Illustrator will break if these lines are also available in the sample application TextFileFormat GoFileFormat() Manager. However, I tried to put these same statements to another location (for example against the click of a menu item), where they seem to work fine. But it may also be accidental. What can be the reason? Is there a problem with this code? Or open files in this way is not possible in the GoFileFormat() Manager, perhaps because he's already opening a new file type? If this is the case, how the code should be changed? I need to open this eps file, in fact more than one eps file when the user chooses to open my special file type (in fact, the eps file names are mentioned in this file). I also tried to set the sAIDocumentList as a global pointer (like many other pointers on in samples), but the result remains the same.

  Any help will be most appreciated.

  Thanks in advance,

  Joydeep Ray

  Hello

  > Or open files in this way is not possible in the GoFileFormat() Manager, perhaps because he's already opening a new file type?

  I think that is probably the reason why it crashes.

  > If this is the case, how the code should be changed?

  You could use a timer. In your GoFileFormat() Manager to store the file name, and then create a timer with a zero time-out.

  File name of store etc.

  sAITimer-> AddTimer (message-> d.self, "DocOpen", 0, & docOpenTimer);

  Return kBadParameterErr;

  In your GoTimer() Manager, open the file and remove the timer:

  If (message-> timer is docOpenTimer)

  {

  sAITimer-> SetTimerActive (message-> timer, false);

  Code of the open document

  }

• How to recover the original file names?

  Hello! Please help me.

  
  

  Accidentally, I changed the names of the videos that I used for Adobe Premiere. So now, every time I open the folder Adobe Premiere, videos are missing and replaced with a red screen "media disconnected". Is there any way I can recover the original file names without having to do it manually one by one?

  
  

  I tried to go back to a restore point, but it does not work. I can't locate too because I don't remember which video is which.

  
  

  I already edited almost 50 videos in this project it would take me a loooot of time to start all over again. :((

  
  

  Hope you can help me.

  If I understand you correctly, you changed the name of the file in Windows and can't remember what used to be file names. You have modified these in Premiere Pro, and now the project files, that you created do not know where to find the video files.

  Is this correct?

  If so, I may have a simple solution for you.

  Assuming that you're not maxing out every file so that they are all exactly the same length, the number of minutes and seconds and images should get you where you want to go. Almost as unique as a fingerprint on my PC, but I never capture a bunch of videos which are identical in time - although it is possible to do, I guess.

  Open a project file. Checking the properties of each file should reveal the name of file theoriginal and duration, which is also available directly on the thumbnail image (see image below).  Open the media browser, then look at the times on each clip. This should be enough to help you either republish or change the Windows name to what it was originally. It's always one at a time, but it shouldn't take too long. A pen and paper could help 50 videos.

  

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• How to put the name of the Module file and use the current file name in the code?

  Hello

  I create SequenceCall (in MainSequence), but there must be the Module file name and existing file where the module. I found an old function that are not part of the API (TS_SequenceCallModuleSetUseCurrentFile() and TS_SequenceCallModuleSetSequenceName(). Those who are in the help file, but not in tsapicvi.c.

  You can help someone with this (CVI code)?

  Best regards

  branar

  Hello

  Problem is solved using different fp (tsadpcvi.h, tsadpcvi.c). Instead of using tsapicvi.c with TestStand 4.2, the missing functions were found in tsadpcvi.c with TestStand 2010).

  Best regards

  branar

• File Express dialog box won't let me enter the new file name

  I try to use the writing of XML file.vi to write a file which may be an existing file, but it may be new.  I would like to than the default to provide so that the user can simply click OK.  I would also like to provide my own text to the top of the window.

  Writing to an XML file is not enough entries to do so I thought I'd use the Express VI from file dialog box to do this.  I provide the startup path and the default name etc.  But when I run my VI and type a new file name a window pops up saying: (new name of file) file not found.  Please check that the correct file name was given.  Ok.

  I don't see any way around that.

  Any help much appreciated.

  

  You must configure the express vi to allow selection of new files

• adding multiple files *.csv while retaining the original file name in the first column

  Hi guys Cela made some time.

  I am trying to add several *.csv files while retaining the original file name in the first column, the real data set is about 40 cases.

  file a.csv contains:
  1, line an a.csv
  2, line 2 in a.csv

  file b.csv contains:
  1, line a b.csv
  2, line 2 in b.csv

  result output.csv is:

  I would like this:
  a.csv, 1, the line in a.csv
  a.csv, 2, line 2 in a.csv
  b.csv, 1, the line in b.csv
  b.csv, 2, line 2 in b.csv

  Any suggestions to speed up my hobbling attempts would be aprieciated

  Thank you

  -SS

  What you could do is given in attachment.

  Started with 2 files:

  a.csv

  copy of a.csv

  Both with data:

• How do you keep Windows automatically passing the entire file name when editing?

  When I copy a file to a folder and rename the file, that I right click once on the file name to select it and again to place the cursor where I want to change the name in the name of the original file.  However, until I'm able to start typing the computer automatically highlights the entire file name, so that when I start typing deletes the original file name and replace it with what I typed.  Is there a way to avoid this and allow me to change the name of original rather than delete it and start from scratch?

  If I press ESC to restore the original name and follow the same steps again, that it allows me to change the name of the original file as you wish.  That is to say, I see only this product the first time I try to change the file name.

  After he highlights the entire name, press any cursor movement: home, end, left arrow, right arrow key.  Who will be development of the United Nations name and allow you to move the cursor in the right place to start to edit. Boulder computer Maven
  Most Microsoft Valuable Professional

• Cannot delete a file in windows 7. Indicates the specified file name is not valid or too long.

  Hello everyone, I'm pretty stuck here. I can't delete a file in windows 7 or any other do with it besides. Says "the specified file name is not valid or too long. It has a funny name [~ t] and no extension. The file type, say "file". The properties are all screwed looking with a mistake on the Security tab, a size of 0 k, is a Windows (c) \Windows\en-US.The other files in this folder appear normal. The computer seems to work very well without any obvious problems. The only problem is my anti-virus reports with a kind of syntax for the file error and indicates it cannot parse this file. I do not. I can't do a thing with it either. Cannot open, rename, move, delete, change passwords, properties, permissions, nothing. It may be necessary for a good part with 0kb. According to me, I want to just delete the thing. Please, anyone? Thanks in advance.

  Hey bud, I figured out how fix it earlier. I am so happy. I came to remember a command called chkdsk which worked very well for various issues, that I had since the construction of my old 2000 Professional machine. I think that one was my first NTFS system. I always liked how well he error correction. Seemed a lot better than the old scandisk. Low and behold, I tried and star ANISE, it is went through it, found this file almost from the beginning of the analysis and a few lines later, he said has been removed. Says something about the file being orphaned some time ago. It was a very bad child, that I tell you. I ran it in safe mode command prompt. I guess he would have done the same thing in the normal windows well, but I happened to be in safemode, when it came to me. I used the switch /f with her. Since the C:\ command prompt or any drive letter your operating system is selected, type CHKDSK/F if I remember although the f was to have it automatically CORRECT errors. I hope this info helps others with their file or disk problems. It seems that many people say they get mistakes and cannot delete various files here in these forums. Thanks Sandeep for answering me and try to help. It does not matter whether or not it was the fix, it takes time to post and your helping people learn to be it. The only thing that remains unanswered for me is actually the thing of the answer. I mean I can't say someone at - it really answered my question and do not count me? Maybe I should mark so that people will bother to read it and get the fix. HMMMM... I come back here some time later and see whats up.  SeeYou, EWOO

• Need to re - register a completed form on in Acrobat Reader and keep the same file name.

  I did collect a form developed for our client in. They need to access and save it several times without making several versions.

  Now that they can open, fill out some fields and "save under" a different file name. They must then go back and edit or add additional information to train at a later date.

  He won't let not the re - save the file with the same file name, only "save under". It is not very practical because they will end up with many versions of the same shape and all earlier versions would be obsolete and useless for them.

  You must disable the preview in Windows Explorer or close Windows Explorer.

• When you use the batch, record with the same file name in the same folder.

  I therefore about 500 pictures that needs to be cropped. I created the cropaction and added a "backup" function and close in action, because I want the photos to be saved with the same file name in the same folder...

  Now I want that it take its course. But no, I have to press ok to confirm the backup on each photo.

  Someone knows how to fix this?

  BR

  Robert

  I solved it.

  I forgot to check the box "override save under ' :)

• ColdFusion CFFTP copy of the file from the remote server and save to a local folder with the same file name

  Is it possible to copy a file from a remote ftp server to a local folder, while retaining the original file name? Please note: the file name on the remote server is not always the same.

  This article from Adobe might be useful.  (I was tempted to use LMGTFY; but I do not have).

  V/r,

  ^_^

• transfer with catalog will use the same file name

  Hello everyone, I evaluate the cloud of Lightroom version. I have a MacBook that I use on a trip to import and did a first job on my photos, so I have a home NAS at home where store pictures and do most of the work.

  I want to transfer RAW files, but all the work with the MacBook on the NAS, I tried to use "export as catalog" and then "import a catalog" with options to move the files, it works but it keep the old file name and it does not put them in a folder with a different name. For example, if on my Mac, I work with a folder named '2015' and then transfer into a folder with the same name on the NAS Server everything works fine, but if I made a folder called 'photos' to work on the MacBook, and then I want to transfer everything on my NAS under the folder "Hawaii", everything is put under Hawaii\photos\ instead of Hawaii\

  I'm having a hard time understand what you did. But the best thing to do would be to highlight all the images in the Hawaii\photos folder and drag them to the folder of Hawaii. You can simply delete the folder of pictures and everything should happen as you wish. Do all the going in Lightroom and it should be simple and quick.

• Lightroom CC adds "-2" before the extension to the import file name with rename

  For some reason, my Nikon D7200 is producing filenames with a underscore ("_DSC0001.nef").  No problem.  What I'm trying to do is to rename the files during import.  I set up a model as follows:

  

  Instead of getting 'HJRW_20150907_DSC0001 '. NAVE' I get 'HJRW_20150907_DSC0001-2. NAVE.

  I deleted the files from Lightroom and reimported as COPY or MOVE, and get the same thing.  How to remove the Lightroom file name suffix is added?

  Thank you

  -Herschel

  This occurs because a file already exists in your operating system with the same name in the destination folder.

• Synchronize the folder removes the PNG files if there is a JPG file that has the same file name

  I often use the folder to synchronize and noticed that he tries to delete my PNG file if there is a JPG file that has the same file name. There is no problem with their import, Assembly, etc...

  The only solution is to disable the ' Remove missing photos in the catalog "on the prompt window synchronize folder so it does not remove it catalog.

  I have the latest version of Lightroom for Windows (v5.6) but it happened in previous versions on both Mac and PC.

  If someone has noticed this?

  -Pete

  "Treat the RAW + JPG as separate folders" enabled or not in preferences?