Sierra + Magic Trackpad 2 = Force click with a single finger no longer works

Similar Questions

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Magic Trackpad 2 unwanted clicks

  My Magic Trackpad 2 is almost unusable because of the unwanted clicks. I ' Tap to click on ' disabled, 'Secondary click' disabled, 'Force' disabled, and 'Click' value 'business '. However, as I lightly drag my finger on the trackpad, it clicks occasionally. Similarly, click-and - drag is almost impossible, because even if I am dragging, with the thumb pressing down to the click and the slippery finger for the movement, the trackpad to slam just yet without waking up my thumb. Well, sometimes simple clicks (actual pressing down) turn into double-tap-, I can hear the trackpad rapidly clicking twice despite me only once.

  Does anyone have an idea what can happen and how to remedy? I don't think that the camera is broken, because it's fairly new.

  Hi, mfkamprath!

  Thank you for using communities Support from Apple. After reading your post, I understand that your Magic Trackpad 2 does not respond as you would expect. actually, it's clicking when you do not expect him. I know that unwanted clicks can impact your overall experience using the computer and want to help!

  To begin, check out the various multi-touch gestures you can use with your trackpad to the article from the link below and make sure that you do not inadvertently cause a click.

  Use on your Mac multi-touch gestures

  If there is no an involuntary gesture clicks that might be the problem, I suggest to remove your Magic Trackpad 2 and put it up. You can use the "Remove a device from your Mac" section of the following article to remove the trackpad.

  Using a mouse, the keyboard or trackpad Bluetooth with your Mac

  The "Magic Mouse 2, Magic Keyboard, Magic Trackpad 2" section below will help you to get the trackpad set up again.

  Configure your Apple wireless devices

  If you're still having problems after removing and configure Magic Trackpad 2, my next suggestion would be to follow the steps described in the article in the link below.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  While the title of the article is not specific to your problem exactly, the steps will always look the you encounter unexpected behavior.

  See you soon!

• The Magic Trackpad ' tap to click on "no longer works after update to 10.11.6

  I have a retina 15' MBP mid 2014. My magic trackpad was working fine before the update. After the update to 10.11.6, I could no longer "tape for click on ' even if the option has been enabled in my preferences. The trackpad on the macbook works fine but the magic trackpad isn't.

  List of things I've tried so far:

  1. the removal of the plist file: com.apple.driver.AppleBluetoothMultitouch.trackpad and restarting

  2 reset the smc

  3 reset pvram

  4 disable pairing and repair the magic trackpad

  5. activating / deactivating ' tap to click on ' option within the system pref

  I'm running out of things to try here. Someone please help. Thank you!

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Computer HP laptop with built in microphone no longer works

  I have a hp laptop with build something of my microphone and microphone all stop working

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =========

  Try a system restore before that happened.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  =========

  If necessary:

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

• DONKEY with AIR 22 update no longer works

  Hello

  I have a DONKEY simple that file sharing.

  It was built with AIR 19.0 and Xcode 6.1.

  I want to update AIR 22, but you have successfully updated the iOS SDK, I have installed XCode 7.3, base SDK is 9.3 iOS and iOS deployment target is iOS 9.0.

  I have a platform.xml like that.

  <sdkVersion>9.0.0</sdkVersion>
      <linkerOptions>
          <option>-framework AudioToolbox</option>
          <option>-framework AVFoundation</option>
          <option>-framework CFNetwork</option>
          <option>-framework CoreFoundation</option>
          <option>-framework CoreGraphics</option>
          <option>-framework CoreLocation</option>
          <option>-framework CoreMedia</option>
          <option>-framework CoreVideo</option>
          <option>-framework Foundation</option>
          <option>-framework MobileCoreServices</option>
          <option>-framework OpenGLES</option>
          <option>-framework QuartzCore</option>
          <option>-framework Security</option>
          <option>-framework SystemConfiguration</option>
          <option>-framework UIKit</option>
          <option>-framework ImageIO</option>
          <option>-framework CoreTelephony</option>
      </linkerOptions>
  

  My code to share a file is, in objective-C, where the variable URL is a URL, the path to a local file

  @try {
     
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
             
              UIActivityViewController *activityVC = [[UIActivityViewController alloc] initWithActivityItems:@[URL] applicationActivities:nil];
              //activityVC.excludedActivityTypes = @[UIActivityTypePrint, UIActivityTypeCopyToPasteboard, UIActivityTypeAssignToContact, UIActivityTypeSaveToCameraRoll]; //or whichever you don't need
             
             
              UIPopoverController *popup = [[UIPopoverController alloc] initWithContentViewController:activityVC];
              [popup presentPopoverFromRect:CGRectMake(0,0,0,0) inView:controler.view permittedArrowDirections:UIPopoverArrowDirectionAny animated:YES];
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  I have this error in execution: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  UIPopoverController is obsolete now, I triied to update my code, as a result of this http://www.goxuni.com/672368-adding-a-share-button-to-an-objective-c-ios-app/

  And the result is:

  @try {
              UIViewController * controler = [[[[UIApplication sharedApplication] windows] objectAtIndex:0] rootViewController];
              
              
              NSArray *activityItems = @[URL];
              UIActivityViewController *activityViewControntroller = [[UIActivityViewController alloc] initWithActivityItems:activityItems applicationActivities:nil];
              activityViewControntroller.excludedActivityTypes = @[];
              
              activityViewControntroller.modalPresentationStyle = UIModalPresentationFullScreen;
              if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad)
              {
                  activityViewControntroller.popoverPresentationController.sourceView = controler.view;
                  activityViewControntroller.popoverPresentationController.sourceRect = CGRectMake(controler.view.bounds.size.width/2, controler.view.bounds.size.height/4, 0, 0);
              }
              [controler.self presentViewController:activityViewControntroller animated:true completion:nil];
              
          }
          @catch (NSException *exception) {
              DISPATCH_STATUS_EVENT(context,"DEBUG_TRACE", (const uint8_t*) [exception.reason UTF8String]);
          }
  

  The error is the same: *-[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil objects [0] object

  I really don't understand why it worked before, and now with new AIR SDK, Xcode new and new iOS SDK, it does not work.

  That's Ok with the last AIR 22 SDK

  Bug #4146925 - ANE compiled with AIR 22 no longer works

• The links I created a page that I built with edge animate are no longer works.

  I created a Web page with edge lead a month ago. The links worked then. I just checked and the links are no longer working. I have no idea why.

  Thank you. I fixed and the links work now. I refine them, but the links are back. I never would have found on my own. Thank you for your help.

• How to change double click with a single click on Windows 7 Pro

  The title is the question

  Hello

  This allows try again. You need to open Windows Explorer.

  1. Go to Start Menu, accessories, Windows Explorer.
  2. When that opens a new window, row from the top, click on organize.
  3. Who opens a menu, scroll down until it says the layout options.
  4. Click the layout options, which opens a new window with three tabs on top.
  5. The first tab says general.
  6. Scroll down the page until you get to the second box that says click to select.
  7. This is where you find single selection.

  Try these steps and let me know how you fare.

  Kind regards

  BearPup

• Web links in emails (with Outlook Express 6) no longer works since the 13.0.1 update.

  Use Firefox for yonks (with XP-pro-SP3).
  After all at the final hour updated to 13.0.1, when I click on a link in an e-mail (for which I use Outlook Express), nothing happens. (I have already many pages open Firefox, I tend to not to close their.) Can only open the link by copying and then open a new Firefox window from scratch.

  Thanks that fixed. For any reason (or no) FF had ceased to be set as default browser, in fact, somehow it seems there is no default browser!
  Thanks again for your quick and easy solution!

• Right click on my mouse button no longer works

  My operating system is Windows XP and I have a Dell PC. It seems that the right click stopped working after the latest windows update. Not sure about this, but it did not work and I can not understand how to get the menu to appear on anything (Web page, microsoft office product etc.). I went on the web to try to find a solution and downloaded a solution that doesn't seem to work. Can anyone offer any suggestions? I really need because I have many projects to come and do not have a right-click option is a big hindrance. using the shortcut method does not work for everything.

  Hello

  1. What is the number of KB updates that are at the origin of the problem?

  2 have. what troubleshooting steps you tried to solve the problem?

  3. do you have problems with a right-click on applications?

  You can attach the mouse on another computer running Windows XP and see if the same problem still occurs.

  I suggest that you check the number of KB updates that have been installed recently.

  There is no history of update for Windows XP; but you can see what updates you have installed on your computer by clicking on add or remove programs in Control Panel.

  To see what updates you have installed on a Windows XP-based computer, you must go through a different process.

  (a) go to the start menu in the lower left corner.

  (b) choose Control Panel from the menu.

  (c) find the icon Add / Remove programs and double click it to open it.

  (d) a list of the installed programs. To see Windows updates put a check mark in the Show updatescheck box.

  (e) now, you will see also all the updates that are on your computer.

  Please provide information on the update installed that could be causing the problem so that we can better help you.

• Double-click to open an item no longer works

  I realized, click items as follows - double-click to open an item from the file Explorer is no more work.

  Because I don't like the single-click mode, whenever I have a new PC XP, I switch, double-click mode.
  And then double-click mode that allows to work as I wanted, but now I do not see any difference between the single-click mode and double-click mode.
  I see the underline on folder tree control item when mouse cursor hovers over that folder and click once to develop even a folder, double-click mode.
  Version hotfixs Microsoft that modifies the behavior of the file Explorer?
  Hi anmaaan,
   
  -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
   
  There is no such release hotfix from Microsoft.
   
  Method 1: Check if the function of the mouse buttons were reversed.
   
  See the following article to do the same thing:
  Reverse the function of the right and left mouse buttons
   
  Method 2: A scan of your computer to check if the problem occurs due to any virus or malware.
  Microsoft safety scanner
   
  Method 3: Run the following command and check if it helps.
   
  a. click Start> run> type regsvr32 /i shell32.dll , and then click OK.
  
  You should receive a message that the dll was registered successfully.

• Firefox Aurora - middle-click on the context menu no longer work correctly

  Recently, after one of the Aurora updates, Middle-click has stopped working properly for context menus. For example click View Image open above the image in a new tab. Now it just opens it in the same tab, as if it were a normal left click. It's very annoying.

  OK, I found the cause. It's an add-on called Omnibar and indeed I got to install it on my two auroras on PC at home and my laptop at work. Now it's time to contact the developer of the add-on and wait for an update.

• CS5 vs CS3 CTRL-drag with the curves layer no longer works?

  I recently moved from Photoshop CS3 to CS5 on the PC. When I create or use a layer of curves in CS3, if I CTRL-click on the image, it adds the curve points to the value of the image and if I CTRL-drag on the image, it would show a cursor move along the curve based on the values of the image. Both very useful. Doesn't seem to work in PS CS5. Am I missing something?

  
  Thank you

  Try clicking on the small hand icon in the upper left corner of the dialog box curves CS5 - then you get a pipette for your cursor and you run this over the image, you will see the small sphere up and down the diagonal line in curves. To place a point on the RGB composite curve, just click. To place a point on the 3 R, G and B curves you Ctrl + Shift + click.

• href with scroll (0,0) no longer works!

  Until the update to V36.01, I used scroll (0,0) in a href as a link to the top of the page - which worked well. It does more for me. Any ideas?

  Do you mean like this:

  <a href="javascript:scroll(0,0)">To Top</a>
  

  It seems that this should always be supported by DND: https://developer.mozilla.org/docs/Web/API/Window/scroll

  Does make a difference if you use:

  <a href="javascript:window.scroll(0,0)">To Top</a>
  

  or to separate the HTML code of your event handler:

  <a href="#" onclick="window.scroll(0,0); return false;">To Top</a>