personalized in a font character?

Similar Questions

• can I use a personal picture for my character?

  i just installed Firefox, and i would like to use my own pics as a persona. can i? please tell me how.
  

  == I tried to use my photos for a character

  Does this help: https://www.getpersonas.com/en-US/demo_create

• Pépin selecion family of fonts 'character '.

  I'm running Illustrator CS4 and I have incountered a strange problem.

  When I type a word I'd like to see what that Word would look like in all of the fonts I have available so I click on the tab character font family and start hitting the arrow down on my keyboard to scroll through fonts.  But I noticed on some points, he'll jump all the way to the bottom of my list of font without known reason family jump all the fonts in the middle.  I tried from the base and the arrows pointing upwards with the same results and it doesn't seem to be a model.  In other words, it doesn't seem to be a specific font that causes this glitch and it doesn't seem to be after a number of strikes curtain.  It's VERY awkward because there is no easy way to scroll through fonts without individually you select the font and by opening the tab to edit and view each choice of fonts.  I planned to remove some fonts, but since it seems so random it leads me to believe that this won't help.

  Someone at - it another incountered this or heard talk of similar problems?

  Thank you in advance.

  http://forums.Adobe.com/message/2281560#2281560

• How to keep personal font settings in WordPad

  How to store personal settings for the type of police and size, more than line and spacing of the paragraphs in Windows 7 Rich Text Documents, while maintaining its usual use:

  Given that so many people around the web keep struggling with this problem, I feel obliged to present this tried and proven method that is simplicity at its best. In short, the guru on this forum, who spend much of their time to help others-"Thank You". The following message is verbose by need, but I'm sure you will like the instructions step by step short and easy at the end...

  First, The bad news

  Some workarounds previously suggested here and elsewhere are close, but not close enough. Users are greatly hampered by confusion and/or incomplete sets of instructions; or having to adopt complex usage patterns; or be forced to open a WordPad only one place model (that is, when pinned to a jumplist Taskbar, or by creating and using a shortcut); or having to perform the steps that are totally useless as having previously entered text in their newly created documents; or told to change the default path of the properties for the program WordPad itself (a popular PC mag); etc... And all-the-moment, whenever this subject is revisited a perpetual solution is proposed.

  Next - The good news

  For more than a decade now, I used WordPad widely enough for simple daily documentation purposes (rather than my Office Suite), and of course millions more can claim the same thing. I would now like to share with everyone of the silver bullet that allows me to open a text Document 'CLEAN' new, with ALL of my desired policy rich and held spacer and settings anywhere on my PC, except the start menu.

  This method integrates with drop down menus for all partitions and folders file, as well as the context menu in all locations, including the office. The only exception is when you open the WordPad program directly via the start menu, in fact where you will continue to get the windows settings by default, if necessary.

  I really not remember the last time I personally went up out of my way to open a new rich text Document in the menu start, because the work is simply not executed in this place. And there is no need to use a shortcut or for WordPad Jumplist because I am able to simply create a new custom file since that she has planned at the site as usual, including a right-click on the desktop as you wish.

  Now--The really good news

  This insertion of registry is actually quite simple and works perfectly, more instructions are easy to understand, and the process takes up to 5 minutes to implement. New personal settings for fonts and spacing are actually kept in a document template and the settings can be changed in the future at will.

  The procedure simply uses a subroutine model integrated in Win7, in order to circumvent annoyingly entrenched WordPad default settings. The location for your personal style is the same place where the default read-only Journal Document for Windows Journal to access under Tablet PC - it is a very similar process.

  Re-designation functions remain unchanged in their behavior, so regardless of the name given to a new document (including the exact title of the model), the model is NEVER overwritten even if it is not made read-only.

  This operation is also totally reversible, simply by removing the template file and the registry of the string value that are initially created without loss of function or stability. Properties and default settings of the WordPad program is in no way modified, through the registry or otherwise - they remain fully intact, as it absolutely should.

  Windows 7 by default / / My desired settings

  Font: Calibri / / Arial

  Font size: 11 / / 12

  Line spacing: 1,15 / / 1.0

  Line spacing: Added / / deleted

  Step 1 - creating a model of personal settings

  (a) In C:\Windows\ShellNew\ create a new rich text named "WordPad settings my model" Document (or whatever you want to name the template, and without quotation marks, just DO NOT add .rtf at the end of the name of this file or it won't work).

  (b) open and edit this file to desired settings for the font type and size, line and spacing of paragraphs. Any other setting change is at your own discretion.

  (c) now, don't forget to hit enter several times (I personally prefer x 5) in order to have several white at the beginning of the model space, which will retain your font settings (with the exception of the last space, who, once left empty always lies with the police by default Windows, similar to the way Windows XP always - used to remember?).

  (d) he has absolutely NO need to type characters in this model! To facilitate the making changes to your settings, the model should NOT be made Read-Only - after all, the location of the file is relatively off the beaten path. Don't forget to save before you close this document.

  Step 2 - Add a new string value in the registry

  Small Word: If you don't know how to Open regedit, I say this - look at the registry a lot as you would with a good guard dog. There is no reason to fear of biting, unless you do something that you're not supposed to do. However, you MUST display it the respect it deserves! Now type regedit into the search box on your Start menu and click the program on the top...

  (a) Open regeditand in the left column, go to HKEY_CLASSES_ROOT\.rtf\ShellNew. To add a new string value, right-click on C:\windows\shellnew and select New > string value, type 'filename' in the field (without the quotation marks or space), and then press enter.

  (b) in the window to the right, right click on the new "file name" field and click on change..., then set the value data to "My WordPad settings Template.rtf" (or whatever you named your model exactly and without quotation marks, and this entry SHOULD include the extension .rtf at the end of the file name). Click OK and exit regedit.

  (c) now, you'll be able to create a new text Document rich from anywhere, as always, you have already, with many empty spaces which are ready for typing with your favorite settings already in place (unless you use the start menu, which will still open up WordPad with all the default settings of Windows 7).

  I hope that this information in the interest of others as much as he to me in my daily computing. Answers are most welcome - however, first of all, try the procedure that you may be able to give a comment founded in practical use. Thank you. :)

  Happy keyboards - Larry

  Hi Larry,

  Brilliant tip finally my 'Verdana 10' glue!  Just a pity the old Wordpad does not work.

  Would you mind if I gave a brief summary on a forum, I belong to with a link to here. Credit full etc etc etc.

  Now if I could only stop Office? Remove .rtf in the contextual menu "new", just "cos I don't want to associate it.

  TIA

  Elmer

  Well, that's my two-penneth worth

• Font problem after updating MS omnibox are a vulnerability

  Since 21 July update for a vulnerability of Microsoft Font, character in the omnibox display is faulty.
  This seems to happen only in the input box, the list is ok.
  for example. I type www and the display shows just the white characters (but the cursor seems to have moved).
  If I type www... I have vacuum or jumbled characters until I get at least 12 characters in the box, then it appears.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• error: application of fonts on the paragraph style

  Hi all

  I am facing a problem while applying fonts on the paragraph style. Below are my code.

  If (myDoc.paragraphStyles [a].appliedFont.name == "Helvetica Neue Light")

  {

  myDoc.paragraphStyles [a] .appliedFont = "Helvetica Neue LT Std";

  " myDoc.paragraphStyles [a] .fontStyle = ' Light 45."

  }

  The error is "police family is not available." asked but the fonts installed correctly and works well even if I do a request manually.
  If I apply the Light "Helvetica Neue Std 45" police anywhere in my (manual) document only once and run the script, and then his job very well.
  Where is problem?
  Any suggestion.
  Thank you
  Shonky

  The problem is, you can not apply "" Helvetica Neue LT Std"because you do not have a 'Light' in this font style; and you can't apply the style

  'light 45' first because you do not have a "Helvetica Neue 45 Light!

  That's what they call a classic "Catch 22" situation. Fortunately, there's another way: you can apply two fonts and style in a single command:

  app.activeDocument.paragraphStyles [2] .appliedFont = 'universe LT\t45 Light ';.

  (Note the font character and style tab inbetween family).

  Very irritating, it's your way to work when applied to the text, instead of a paragraph style. for a moment, you will get a pink text in the 'police' [Helvetica Neue 45 Light], and when you apply just the style, all is well again.

• Help! STUCK browser. I have vital information to save!

  I was looking for a word in a dictionary of synonyms online, when a window pops up saying "Beware, unresponsive script". There are 4 options, including no create no response. The window just stays there. By clicking on "stop script" does nothing. I have another tab in the window with the writing that took me hours to compose. If I force quit it will lose it. Help help help! Thank you in advance for any help on this!

  Karen

  Hi... then the solution for me was to go to tools on the menu bar, and then click Personas and change the character. Somehow who re-activated and I was able to return to the tab I need, take screenshots and then force quit. Phew! Thanks for your help people!

• How can I return the theme I had before he went all wacky

  a few years back I downloaded a neat theme that looked like a vine, and I would like to get it back. I could not find in all themes you have now.

  You have a backup of the Firefox profile folder, which can include the files of this character?

  If you love a character, then it is best to save a backup copy of the persona images because the character is not sustainable and is removed from the server.

  Personas installed data and its background color and the color of the text is stored in the pref lightweightThemes.usedThemes in format JSON object.

  The images of the selected character is stored in the header of lightweighttheme and lightweighttheme-footer files in the Firefox profile folder.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• Insert symbol in word doc using the report generation toolkit

  I'm trying to insert a graduation or a brand of corss the word doc by reading the bookmark. To enter a value, I used a control of the chain. But I have been unable to enter these symbols. I tried to make the insertion of an image, but it is to insert the image but don't replace do not bookmark. Please help me with this!

  ben64 wrote:
  

  Maybe these symbols are not included in the character set used by Word. Do you have something or nothing, is there an error message?

  Ben64

  Here is an example of what I said:

  

  I need to insert the check mark, set the font for report to Wingdings (restore the default font after). If I don't do this the character ü is written (0252 default font character).

  Ben64

• Boring box that follows the mouse...

  How can I disable the box which is with my mouse whenever I have land on an icon or word or anything anymore?  It's boring.  Is there a toggle for it?  Help, please.  It's driving me crazy!

  In some cases, you can disable those. For example the tip when you tap on an icon that tells you when this file was last modified.  Here are the instructions to do this:

  http://www.windowsreference.com/general/how-to-EnableDisable-ToolTips-in-Windows/

  However, in other cases, you can not turn off.  For example here on this site, the programmer has programmed so that when you point to the picture of a person (as your little character with a flute), it shows your name as a popup.  You cannot disable this, only the person who has built the program (or a Web site in this case) can do.

• How the color of a police of 2 different colors? Please help me :)

  How can we the font color with 2 colors in windows applications?
  I know that the windows fonts are colored in applications (such as messenger, MS word)... because the police are (colorless) originally... my question: is it possible to the color of the font with 2 different colors? as the upper part of the letter A to be yellow and the Red lower part? or as describing the letter with a different color?
  and by the way, I don't want not something does not like using the WordArt in MS word... who uses images... I want a software to color the fonts we use in messenger/wordpad / any application under windows (customizable color pixel by pixel)... because the demand police colors... If anyone can help me with that? Thank you very much

  and please tell me if there is any software that can do that :)

  As I said, I doubt that there is no 'coloring software police' who will do what you want. However, contact one of the creators of fonts and see what they have to say. Certainly a person of professional fonts Foundry will know if it is possible to do what you want and if so, how. MS - MVP - Elephant Boy computers - don't panic!

• Last line of the text Telnet cups

  It's on a Vista computer. When the user is on the last line in the window, more half of the fonts character is cut off. There is no way to scroll down lower to see the line of text.

  Hi AirForce9797,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Windows Vista Networking forum.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Flash AS2: Textfield via code text setting causes some characters to delete

  I have the following line of code to set the text of a dynamic textfield:

  boxCopy.text = 'Coming soon: 30th January 2014'; 

  but when I compile the file, it displays as: ' Coming soon: 0E January 201'

  I have no idea why this is. The fonts character set contains all numeric characters, so must post it.

  Anyone got any ideas?

  Thanks, Stefan

  Normally, whenever there is a problem with the characters don't appear is not the solution is to incorporate the police into the textfield.

• Import graphics Illustrator in the right size

  Hello

  Anyone who is familiar with the import of Illustrator graphs at the right size?

  East - the right approach? In InDesign, my Options of text block told me that my block of text is 35p7.276. My graphic Illustrator must therefore the two 35p7.276 high and wide. Then I put the character of my graphic style to reflect those of my InDesign document and now, she's ready for the import?

  Thank you!

  You mean like the refresh from scratch?

  No, I don't have the figures for the chart. Most of the time I start with something that has been stuck in a Word from Excel file. If I can get the numbers, then it is usually easier to just remake the chart in Illustrator using graphical tool Illustrator. But without the numbers I usually end up copying and pasting from Word to Illustrator and then manipulate (drawing a) graphic of what I want to (change the fonts, character, STROKE, color, size etc. and then resize it to final print size and then resize the type even once).

  I don't know what you mean by "dealing with the actual graphics in Indesign. InDesign is not a graphical tool. Similarly, I don't know what you mean by vectorize. Create outlines is a way to convert the type of vector art. A graph is already (or should be) vector art (with a small cast type).

  Ken

• Open type.

  Hello
  I am considering buying fonts open type (Meta Pro) to make maps of the Eastern Europe eg, the Turkey (and any other country that uses some weird diacritics in their names ;-))
  I dare not ask, but support FreeHand open Type fonts? Only Illustrator? And how are these taken policies supported by both programs?
  Thanks for sharing
  Willem van den Goorbergh

  > I dare not ask, but support FreeHand open Type fonts? Does
  > Illustrator? And how are these taken policies supported by both programs?

  Freehand can use OpenType fonts, but can access only the ascii (such as Type1 fonts) character set, no unicode support that is.

  Illustrator can use any unicode character, you throw at it. Including the stylistic sets etc.

  Edtiting of text in Illustrator is much slower, but with little practice and to keep all the text in a separate layer elements make it tolerable. Also the use of styles is a must, but unlike Illustrator FreeHand has character styles.

  Both suck by doing good body text hyphen. In FreeHand, you will need to manually add tons of discretionary hyphens and other settings. In Illustrator, text of paragraph is basically better but half a dozen serious bugs make editing intolerable remarks. (These bugs appeared in version 10 and are not yet set.!)

  Jukka