Insert symbol in word doc using the report generation toolkit

Similar Questions

• How to use the report generation tool to get a list of bookmarks in a Word template

  I'm working on a project where I need to use the report generation tool to fill a fairly long Word template. MS Office report Express VI can have entries for a maximum of 17 bookmarks that is not close enough to what I need to do.

  I wonder if there is a way to use the lower level screws report generation to read the word template and return a list of the names of bookmark in the form of a table 1 d of string. The dialog box that allows you to implement the Express VI has this ability, but I'm not finding a way to scan the document programmatically.

  I'm sure I can't be the first person to encounter this problem and I hope someone out there has found a good solution.

  Found the answer to this one that I was looking for the forums. Apparently, you can do this directly through everything in the VI report tool, but there is a VI in Wordsub.llb do that.

• Hide the Excel using LabVIEW Report Generation Toolkit or active chart legend

  Hello Eveyone:

  I'm working on tool report generation in labview and creat excle report. I create the chart in the report, but I can't hide the chart legend or change the font size using the report generation tools.

  I appriciate you guys time.

  Thank you

  Howdy!

  What version of LabVIEW Report Generation Toolkit you use? Did you take a peek at the .vi LabVIEW example column chart (Excel)

  

  and he looked at using the Excel insert graphical VI and Excel graphic Set do?

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• Is there a method to delete a worksheet by using the report generation tools.

  Hello

  I have an excel report, every time when I opened this report a worksheet is added to the report.

  Is it possible to remove worksheetm rather a spreadsheet.

  Thanks in advance,

  I posted the code on my last answer.

  Please check attached.

  Thank you

• Set the position of the cursor in the text added (to make the part of the text in index) in WORD using Report Generation Toolkit

  I would like to generate a report in WORD using the report generation toolkit.

  Whenever a text is added to the report, the program should put part of the text index. The problem I am facing with is to set the cursor position in the current location of the text.

  Any suggestions?

  Hello!
  I think that's what you wanted (see attachment).

  First, you must set position for each loop, so after adding the table, your cursor index need to increase the number of added characters. That's why I have included the text of the report, Append - to get the position of the cursor at the end.

  Indexing begins with 0, so you need to set the 3 and 7.

  Hope you get what I mean

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• Cannot print on the Epson TM - U590 Slip printer Report Generation Toolkit with LabVIEW 8.6.1

  Hi all

  I have an application that uses the report generation tool to print tickets for a printer file.  Usually, it works very well - I 8 existing facilities where there is no problem

  I install the software on a new site that uses a printer Epson TM-U590 slip currently and I can't for the life of get me printing to work

  Using a Standard report, the Print Report.vi returns error-41002, indicating it does not find the printer.  I opened the VI using the remote debugging and it does not find the name of the printer properly with the available query Printers.vi.  It gets an error-2147352567 code starting from the printed node, which is then replaced by the de-41002 error that is reported.

  For historical reasons, I always use LabVIEW 8.6.1 for this project.  I plan to spend in 2011 or 2012, but I had some reliability problems with the other parts of the application after trying to upgrade to a new version of LabVIEW, so I would avoid it at this point.

  The application runs on a standard desktop with Windows 7.  The slip printer works fine if I print from Notepad, and my request is happy to print to any other printer, just don't slip printer.

  The slip printer using the LPT port.  Previously, printers of the folder that I used were USB but I expect the printer driver to hide the details of the application...

  Any ideas would be very appreciated

  See you soon

  Brett

  I managed to solve the problem, thanks to this article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64

  I now have the same problem with a folder of Star printer (a TUP592), this time with another program developed in LabVIEW 2011.

  As mentioned in the article, the problem is in fact to do with margin settings rather than the name of the printer, despite what says the error message

  After some tests, I received the Star printer to work by setting a large (> 14cm) right margin.  No idea why this is necessary because it seems quite happily print to the right edge of the paper, but there you go.

  So I don't have defintely solved the original problem yet, as I've not had back on the site, but I hope that it will be useful to someone else.

  See you soon

  Brett

• The report generation tool must Office?

  Quick question: the Report Generation Toolkit (V1.1.3 for LV 8.6) should Microsoft Office installed to be able to create Word documents?

  I have a need to create reports, preferably in Word format, but the target computer cannot have the reader on your computer, office.

  Yes, you need office.

• Report Generation Toolkit makes Excel Flash annoyingly

  When I use the report generation tool, I have inserted some graphs of my data in the report. If I start with the 'normal' Excel window the user can see each data item such that he is put in Excel. If I start with the window "minimized" Excel then they see the excel application open and reducing to a minimum and then return to the task bar repeatedly.

  Is there a way to generate the report as a whole unless the user to see things being added to the report? I just want what they see the report 'final product '.

  
  

• VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

  Hi all

  I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

  I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

  
  

• Report generation toolkit jump between workbooks

  Hello

  I'm having a problem with my VI which I wonder if anyone has a solution too or workaround.

  Basically during my tests I write multiple data sets to different sheets of Excel using the report generation tool.

  At the beginning of my code, I have opened a workbook (Excel model file), I write data to the file at the end of each test for each iteration, and then save and close the file at the end.

  I have attached a PNG of one of my screws that writes a set of data in a worksheet, it might be called several times during my code.

  The question I have is that if I work with a separate workbook, whenever my slot that VI runs, it will pass test results workbook.

  I am aware that I 'Get' the workbook in my code and that's why it happens.

  Is there a way to call different sheets in a workbook in a VI without affecting the user who is working on a separate Binder, write data in the background?

  I'm not sure if it is possible to write data to different sheets in a workbook without using the 'Excel get sheet VI' before entering data.

  I know I could just save all data in tables and then at the end to write all data to the workbook, but it isn't a preference

  Any information would be appreciated with gratitude

  Thank you.

  Has replaced the rule of 'No change' window in the new report VI

  Seems to have done the trick

• LV 2011 report Generation Toolkit Constantly calls for 8.6.1 CD

  I'm having a strange problem.

  Its a little intermittent, so I'll try my best to explain when it occurs.

  -If I do a new project and run something the report generation tool, I get an installer of labview 8.6.1. I'm under Labview 2011 and I had never installed 8.6.1 on this computer. He will spend about 3 minutes install something, then ask for a CD of labview 8.6.1.

  -If I hit Cancel it disappears for the project until I restart the computer. In fact, should not be the CD, it asks just for her. The VI containing the Subvi report runs very well, but if I open one of the front panels I get message Setup again.

  -If I ran something that uses the report generation tool earlier in this session of connection I do not encounter the bug.

  -Restart labview does not appear, only the computer restarts

  

  There are classes in the GTA that are loaded dynamically.  You must include the screws in your construction.

  We have found that you must add the following two folders to your project and then force them to be in your EXE version.

  \vi.lib\Utility\LVClass

  \vi.lib\Utility\NIReport.LLB

• Report Generation Toolkit missing VI

  LabVIEW version 8.6.1

  Report Generation Toolkit 1.13

  I just started work on an ongoing project that others have contributed to during some time.  (This is why the project being in older versions of LabVIEW)

  On my PC, apparently miss me VI "Word get ActiveX References.vi"

  I have the version 1.13 of the installed tool, just like all other machines running this code performs.  But my word.llb only contains VI

  I tried to copy just that VI in the .llb the VI is then found by the application.  But is not executable due to this error: this VI is related to a library that does not include the VI. The VI may have been removed from the library. ' Add the VI to the library or select file "unplug library.

  I also tried to replace my C:\Program NIUninstaller Instruments\LabVIEW all 8.6\vi.lib\addons\_office\ the directory with the files from a PC that worked.  Yet once, I get the same error as above.

  I tried to do a repair on my installation of the box tool.  But as far as I know, it did nothing.

  I also tried just reinstalling the Toolbox.  But since that it has been already installed, it did nothing.  I would hesitate to uninstall and reinstall the Toolbox for fear of breaking all my 8.6 projects, as well as perhaps my 2009 projects.  I don't think that he messes with my 2009 installation.  But I know the order in which things are installed can be critical in the system with several versions.  I don't know if this applies to tool boxes or not.

  This PC also has a LV 2009 SP1 installation, and this version also has the Report Generation Toolkit installed. (even if it is a different revision of the Toolbox as 1.13)

  I know that in the past, several versions of this toolbox were not compatible, which means that a single version of LabVIEW installed might have a job Report Generation Toolkit installed.  But I have been in agreement that it was no longer a problem.  Although it may not be a coincidence that none of the other boxes development runs this code are not installed LV 2009 have.

  Anyone who has encountered a similar problem and found a solution?

  Thank you.

  Before that we unified the version numbers of LabVIEW and toolkit (in 2009), there are cases where it has not changed the version number in the registry for one reason or another on a minor update.  So very well may have installed 1.1.4 and it can still say 1.1.3.  However, assuming that 1.1.4 has been installed, I can't imagine any reason why Word get ActiveX References.vi wouldn't be here.  VI lives at vi.lib\addons\_office\word.llb, so after installation from 1.1.4 to your folder of LabVIEW 8.6, check that the VI is actually there.

  D

• Report Generation Toolkit V9.0.0: Report.vi print does not print

  Hello

  I migrated my project Labview 8.5 Report Generation Toolkit V1.1.2 to Labview report Generation Toolkit V9.0.0 2009 system.

  In this project, I use the report generation tool to print a Standard report with e bit of tables and graphs.

  The Report.vi of printing VI now offers the 41002 error with the text "invalid printer name. I, of course installed the right printer on the machine.

  I Don t one connection at the entrance of 'Printer name' string of VI, because I want to use the default printer.

  In my opinion, West one bug in the Report.vi of printing: If you don t the "printer name" input wire, the vi must use the default printer, but in this case the vi connects the entry blank chain at the entrance of the node method he calls.

  I fixed this bug, but the node method always returns the same error.

  any ideas?

  Thank you!

  Thanks for the link!

  For some reason I can´t find this specific article in the knowledge base (my browser is rerouted always to the German of ni.com version, because I'm in Austria). I tried to search for the exact title of this article and the error message string, but no result...

  I also installed Labview 8.5 and the toolboxes 'old' on my new computer in addition to Labview 2009 and the 'new' toolboxes and tested my program to 8.5. Here, I got an error mentioning the margins and I had to change the margin for printing settings, then worked.

  After reading the article, I applied the same changes to the margins in the 2009 version of my program and it works too!

  Problem solved!

  Thank you very much!

  PS:

  I wrote first of all, that West might be a bug in the new version of Report.vi printing, but I ve compared to the old version and there seems to be no bug, sorry!

  After all, I decided to stay with Labview 8.5 for now, due to another problem:

  It s not possible to "save the previous version" of LV2009 to LV8.5 directly.

  Laview grave failure, when a VI contains a structure of the event I found by looking in the "known issues", and I have a lot of report with the structures of the event!

  I must have the ability to save my projects Labview 8.0 and 8.5. The only way is to save for 8.6 and then save 8.6 to 8.5.

  That s long and nasty!

  Perhaps a future update will solve this problem (without producing new)