PES 10 - reading RGB channel values with any pointer to image?

Similar Questions

• I can't read the .avi files with any program on my system.

  I can't read the .avi files with any program on my system. Have several programs that all of them played before September 2010, like the classic, windows media center windows media player media player, Director of windows, windows, 5.3, video programs video ulead dvd creating toshiba. Nothing works, frustrating not being able to download videos from two different cameras and burn them on DVD. I get an error of almost all the programs, saying that it was unable to load the required component, but I can't determine what this component. I tried to reinstall the codecs again non-joy.

  The free utility GSpot to identify the codec that created
  a .avi file... maybe it will help solve the problem:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Good luck.

• How to read several channels simultaneously with a minimum

  Hi all

  Please see the attached file. In fact, this is a simplified example of my real application, I didn't understand the second half to reduce the complexity.

  As demonstrated, I have two entries of analago I need to read (position and acceleration) with a SPECIFIC requirement which is:

  At the same time, I make some decisions based on data more recently acquired in the "timed loop. The decision part is not included in this vi. for simplicity. But the fact is that I just need the most recent data (as well as online) make a kind of decisions.

  Everything seems fine and it seems that I collect data in a way desired interval of 1msec. BUT I just discovered that the data I read (in the timed loop) are the most recent one compare is not to the real sensors. In other words, there is a delay in the acquisition process. The value in the timed loop is like 100 msec delayed the release of real sensor, which is generated by the sensor and acquired by DAQ card.

  This problem makes my decision making part of constantly decide according to the before value of 100 msec. Unfortunately, it's terrible to my request, i.e. it is an intolerable delay to the process.

  Are my settings of data acquisition as samples per channel, the number of samples per channel or right of sampling rate? I appreciate if someone can help me with this application. I just need to collect data at 1 kHz, as close as possible in real-time (online) or with a minimum delay, not 100 msec.

  Thank you.

  
  

• RGB channel does not show the imported images...

  RGB channel does not show the images imported... I can see it in blue, red and green circuit, but not in RGB... Please help...

  (I use Photoshop CS6)

  Well, that clarifies.

  Open Photoshop > edit > Preferences > Performance > the GPU settings > advanced settings > Drawing Mode > change to base - from now on, it is in "Advanced". See if that helps.

  If so, your video card doesn't support acceleration entirely for CS6.

  Looks like the driver of your video card is old about 3 years and more than 4 main versions:

  Driver date: 20090208190620.000000 - 000

  Driver version: 7.01.01.849

  Visit the AMD Web site to search for the latest drivers.

  The current version is 12.6, released July 23, 2012. This will certainly help you with your question.

  Also, go to help > update and download / install all the updates that are available for Photoshop. The current version is 13.0.1. You run 13.0 which is a compilation of March 2012.

  Let us know how it goes.

  -ST

• Newbies: Read the audio data with any symbol - EASY

  
  I spent a lot of time figure this out and want to share with other beginners. I used the text, but everything that can be transformed into a symbol works.
  
  1. turn on your screen that will be used as links in symbols text/photo/etc.
  2. right click on each audio file, you will use and select Properties. Adjust the compression to your liking. Under connection, select export for ActionScript. Ok.
  3. click on each symbol on the stage and him give an instance name.
  4. click on each symbol, select window > behaviors. Click on the '+' etselectionnez sound > Sound support library. Under link ID, type the name of the audio file. Under its Instance, type an instance name. Be sure to play this sound when loading is checked. Click OK.
  
  As I said, easy

  
  I spent a lot of time figure this out and want to share with other beginners. I used the text, but everything that can be transformed into a symbol works.

  1. turn on your screen that will be used as links in symbols text/photo/etc.
  2. right click on each audio file, you will use and select Properties. Adjust the compression to your liking. Under connection, select export for ActionScript. Ok.
  3. click on each symbol on the stage and him give an instance name.
  4. click on each symbol, select window > behaviors. Click on the '+' etselectionnez sound > Sound support library. Under link ID, type the name of the audio file. Under its Instance, type an instance name. Be sure to play this sound when loading is checked. Click OK.

  As I said, easy

• read the independent values in a channel

  Hello

  I want to read the value of a chanel.

  I guess that every chanel's store as an array with an index and a value.

  I would like to read a value of a chanel with its index number, then do some calculations, and then write to it.

  For example:

  Chanel 1:
  index value
  1           1
  2           1
  3           1
  4           2
  5           1
  6           1

  start index = 0
  value > 1?
  If no control of the following
  If so do something

  Do you have a sample script to read a unique value in a chanel?

  Kind regards

  Frédéric MANUAL

  OK, so it should work

  Dim oChn, K, value
  "Go to the channel you are interested in.
  Set oChn = data. GetChannel ("Time")

  ' loop through all the values
  For K = 1 To oChn.Size
  Value = oChn (K)
  If (value > 1) then
  "do something
  MsgBox ("value WG 1")
  End If
  Next

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• Read channel values

  Hello world

  I have a very common problem. In a SOUTH dialogue box, I load and display channels in a channel-drop-down list box. If everythings perfect so far, but I have a few text strings and I text entries whose length can vary, but I can't understand how to display the text string values in a drop-down list box, after that the corresponding text string is selected. It can be very simple, if there is a command which is sth like "read channel values. I got an idea, which is a lot more time, I can create a dynamic table and use a drop-down-list list box - but I'm in kind of a hurry. So if you have an idea about it, I'll be very grateful.

  Thanks in advance

  Hi fscommand.

  I don't know if it might be useful for you, but if you want to write or read the text values of the channels is a command called CHT.

  For example: reading MyText = CHT(3,"Group1/TextChannel")

  writing for intLoop = 1 to 10 CHT (intLoop, MyChnName (0)) = 'Value' & Next intLoop //for loop writes the values

  Greg

• Error while using any tool in Photoshop "could not use tool the___ ("fill in the blank with any tool") because the channel of the target is hidden".

  I'm working in Photoshop CC, but when I try to use the tools I get this message:

  "Could not use the___ tool ("fill the void with any tool ") because the target channel is hidden."

  Why I get this message? I haven't hidden all channels.

  Anyone know?

  Thank you.

  Hi snow,

  See this thread: 'Could not move tool use because the channel of the target is hidden'

  Kind regards

  Claes

• Impossible to download music - error message reads "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program."

  I bought a song to download from Wal - Mart.com and received the error message when I tried to download the song. "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program." I've never had a problem before. I paid for this download & even I can't access it.

  The site of Wal-Mart offer a plugin or program (Walmart MP3 music downloads) to manage this Protocol?

  See:

  • http://MP3.Walmart.com/store/help/help.htm
  • http://MP3.Walmart.com/store/help/downloading.htm

  On a protocol must be enrolled in a program for Windows that supports this Protocol.

  See also http://kb.mozillazine.org/Register_protocol

• How to access the channel values?

  I'm new to scripting language DIAdem.  I TDMS has a group and several channels with String type all.   How to read the first 4 characters of each string values and store into the new channel?  Example of data file attached.

  I tried for the statement in the Script window

  Ch("[1]/result") = Ch("[1]/Frame")

  or

  Ch("[1]/result") = Right (Ch ("[1] / framework", 3))

  All gave me error...

  Hi NiCoder,

  It's the way you read and write individual channel values, but what to do value-by-value is much slower that make them all with a single call to ChnCalculate():

  Set Group = Data.Root.ChannelGroups (1)
  
  Define FrameChannel = Group.Channels ("Frame")
  
  Set ResultChannel = Group.Channels.Add ("Result", DataTypeString)
  
  iMax = FrameChannel.Size
  
  FOR i = 1 TO iMax
  
    ResultChannel (i) = Right (FrameChannel (i), 3)
  
  NEXT ' I

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to acquire of various AI channels simultaneously with a different range for each of them?

  How to acquire of various AI channels simultaneously with a different range for each of them?

  In LabView, I found some examples but in C it is not seem to be any.

  Or you can add channels one by one with individual instructions: the follwing code compilation and runs without error on vitual DAQ hardware:

  ERR = DAQmxCreateTask ("", &taskH); ")
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai0', 'AI0', DAQmx_Val_Cfg_Default,-5,0, 5.0, DAQmx_Val_Volts, "");
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai1', 'AI1', DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, "");
  
  DAQmxStartTask (taskH);
  
  ERR = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, & read, 0);
  
  DAQmxClearTask (taskH);
  
  

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• Read the last value of a large file of PDM

  Hello everyone!

  I hope someone can help out me with this one.

  I try to put in place a program that can read the last value of one of the large channels of different TDMS files but I just can´t find a way to do it.

  I would appreciate help for my little problem.

  Thank you very much in advance for your support.

  Kasim.

  Hello

  You can use the following playback TDMS Set Position feature included in the PDM API.  This function receives a parameter called "(0:start)", which can be set to 1 to go to end of the file.  In this way, you can read the last value written to the PDM file.

  I hope this helps!

  Anuar Rojas

• Read the values of luminance of the image

  Hello

  I would like to create a plugin that changes the saturation of an image based on luma values, similar to the curve of Lum VS Sam of Davinci resolve.

  How to read the values of luminance of an image? I couldn't find any image manipulation methods in the SDK, but maybe I'm in the right place.

  Thank you

  To attach the Lum VS DR Sam curve.

  

  The SDK API won't let you change individual values in pixels, i.e. what, I should change the saturation of a pixel from its brightness.

  The SDK lets you change even develop settings can be changed in the UI (for example an exhibition), via picture: applyDevelopPreset (), the:applyDevelopSettings() papers and LrDevelopController photo.  But none of the sliders in the user interface let you accomplish your purpose, if you can not do with the SDK.

  You can write an external editing (for example in C++ or Swift) application which provides such a feature TIFF.  You would be it interface to LR as a 'external editing plugin', as the Nik plugins.   But I don't think that's what you think.