peut vista premium on the same network home with an o/s of windows7 with a printer between pc Desktop 4, s

Similar Questions

• Impossible to get two printers same work (MG5420) on the same network home wireless

  I bought another MG5420 this week and I tried to configure it on my home wireless network.  It's on the wireless network.  However, the canon print utility seems could not find and it always go to the original one (old).  How to make both of them work on the same time?

  Thank you for your help in advance.

  found a solution

• Update of 2 PCs on the same network home

  I found that the updates are quite large and use a lot of my monthly download allowance.

  Is it possible to download the update once, but apply it to both computers on the network.

  Download the same thing twice is very effective!

  I use Photoshop and Lightroom creative cloud.  Both PC's are Windows 7 [64 bit]

  William

  William, please see http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html for direct links to downloads that are currently available.

  They will also temporarily stored in your temporary folder after they are downloaded and installed.

• CC will not update anything, error code 205, contacted Adobe several times, never a problem with my laptop, just the PC on the same network home. They can't fix it. Tell me that I need a different network provider.

  ADOBE has taken control of my PC to try to understand it, without success. Then give me a link so I can direct download for the programs that I need updates for.

  Error 205 is mainly for internet connectivity interrupted as well as firewalls, I guess you must have lived:

  Error download or update Adobe Creative Cloud applications

  You can search for solutions in:

  Installation of Creative Cloud-error 205

  Creative cloud error 205

  ERROR 205

  Concerning

  Stéphane

• CANNOT ACCESS VISTA BY XP AND CANNOT ACCESS XP SINCE VISTA WITHIN THE SAME NETWORK MACHINE

  I'm using vista Business. while I try to view other machines with the same working group in the same network... My machine only manifests itself in the network... No, other machines are available... and will have remote desktop also does not work if I have an address user name and password and IP address of the remote computer running xp...  Help me.

  Hi NIRAJ KARKI,.

  You can't use Remote Desktop connection to connect to remote computers running Windows XP.

  This package contains the Link Layer Topology Discovery () LLTD Responder. The network map on a computer running Windows Vista presents a graphical view of the computers and devices on your network and how they are connected using the LLTD protocol. The LLTD Responder must be installed on a computer that is running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.

  I suggest to install Layer Topology Discovery LLTD Responder (KB922120) (Link) and check if the problem is resolved.

  Link Layer Topology Discovery (LLTD) responder (KB922120)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

  You can check the link below.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Configure DHCP (get guest and host on the same network)

  First of all, I want to thank everyone for all the help that has given me so far.  I apologize that I'm such a newbie to virtualization, but I learn fast!

  I'll have set up a printer (HP OfficeJet J4860) wireless.  Here is my configuration:

  Computer: Dell computer Inspiron 1318 laptop

  VMPlayer Version: 3.0.0 build-203739

  Host o/s: Fedora 12 Linux 64-bit (2.6.31.12 kernel - 174.2.3.fc12.x86_64)

  Comments o/s: Windows 7 Home Premium

  Guest network settings: NAT (using DHCP)

  The problem I have is that the configuration of HP printer utility complains that the IP address of the printer (192.168.0.102) is not on the same network as the client (172.16.79.1).  So, in order to install the printer, I need to configure the VMware DHCP server to use IP addresses in the range 192.168.0. *.  I tried manually editing /etc/vmware/vmnet1/dhcpd/dhcpd.conf and /etc/vmware/vmnet8/dhcpd/dhcpd.conf (Yes, I know, the files that you are not supposed to change these, but I tried anyway).  Who broke everything (guest couldn't access anything whatsoever!), so I put the original files of dhcpd.conf.  I also tried to change the settings of the VM guest network to bridged and assigned a static IP to the map in Win7, but that does not work either.  (I did not try to use the Host parameter only because I don't have any idea what this means?)

  Could someone guide me please you through the configuration process of the range of IP addresses to the DHCP server on VM or manually assign IP addresses bridged network or host-only?  I have attached copies of my config output files and the vmnet1 and vmnet8 ifconfig in the case where it is useful.

  Thank you, in advance, for any help.

  Best regards, Chris

  P.S. If this question has already been answered, I'm sorry for the redundancy.  I'm looking through the forum, but I am come with has been set to the "NAT" VM network and map comments to "Using DHCP".  So, if this has been answered before, please point me to the thread.

  According to the ifconfig_output.txt IP address of the host is 10.41.1.111, and you say the IP address of the HP printer is 192.168.0.102 if the host cannot yet access the printer on this subnet so neither will be the guest who is on the 172.16.79.x subnet.

  How the host receives its IP address?

  Is there a router in the game?

  If so you can assign the guest Bridged to so it will then get an IP address from the router and then the host and the guest will be put on the same subnet and then you configure the HP printer to have an IP address that is on the same subnet but make it a static address that is outside the scope of the Pool of addresses IP DHCP servers as it better to have the printer to use a static address and not a single one in the range that would be affected through DHCP.

• my windows says that another computer is running in the same network with the same ip address, please contact

  Today morning when I opened my samsung mini, it displays a message that another computer is running on the same network with the same ip address please find a solution for this

  In most home networks where multiple devices are connected to a router, router will assign an IP address to each device (via DHCP). This method keeps usually different devices to get the same IP address, but if you restart your router, it will not address remembered that he released before it was restarted.  This condition can also occur if you manually assigned an IP address to a device located in the router's DHCP range.  If the problem is not due to manually assign an IP address, then this condition will be corrected over time.  But if you're in a hurry, you can unplug your router from the wall and stop all computing devices on it.  Then plug the router back in and bring up all your devices again one by one.

  HTH,

  JW

• BEFSR81 with WRT54GS to the same network?

  I currently have a LinkSys BEFSR81 connected to a cable modem that I need at least 6 ports wired to my home network.  I also have a WRT54GS which is currently unused, but I want to add to the network so I can have both wireless connectivity.

  Assuming that it is possible, what is the best way to combine the two units in the same network?  The simply connectable WRT54GS downstream of the BEFSR81 via one of the ports open?  I guess I'll have to change the IP address of the wireless device for individually accessible for configuration, check status, etc.  All the other things I have to do?

  Please notify / thank you!

  I found the solution in a previous post, sort of.  Here's what worked for me:

  (1) connect direct PC to WRT54GS

  (2) turn off DHCP and change the WRT54GS IP to 192.168.1.2 (192.168.1.1 for the 'master' BEFSR81 vs).

  (3) save changes

  4) activate wireless, configure security, get access, etc. on the WRT54GS code

  (5) save changes

  (6) re - connect the PC to the original port BEFSR81

  (7) connect the ethernet on BEFSR81 port to a port ethernet on the WRT54GS (NOT the Internet port)

  (8) to enter the code in the WiFi device and make the connection...

• Unable to join the network "Home" with the iPhone

  Immediately, my iPhone detects my network "Home", but will not allow me to connect. I have 2 desktop Mac connected if it means something. Support Apple says that the problem is with the router. I was watching the boards until my head swim, and I can't find anyone else with this problem. In other words, unless those with password failure are the same SEO. My subject line in this post is exactly the error message I get. I would like suggestions. Thank you!

  What is the model of the router?

  What kind of security you use on the router...? If you use WEP, use Key1 as network key. Make sure that Mac Filterring disable on the router... Try changing the channel on the router wireless. Also check out this link.

• Windows 8 and Windows RT can't find/see each other on the same network

  My problem is very simple, but I can't for the life of understand me.

  I have a Windows 8 PC and a tablet of Surface RT, they are both connected to the same network but I can't connect to the home group. I am not able to see computers, when I click on networks so connected devices.

  When I disable the security of password of my router, everything seems to work properly. I don't want to leave my network available to everyone however. so as soon as I put a password on my router now I can't pick up devices and home group. I tried to change my network advanced setting but who just so used to work. I don't know what there is to do.

  This is for both of my devices, I don't want to leave my router without protection. Is there a way to fix this?

  I think I found the answer to the problem. I went to HomeGroup settings on my PC and on my Surface and I checked everything on making default setting the private setting may be available on the network.

  After that, I went to make sure that the firewall on my computer has been set to its default value. Then I went to check my firewall antivirus (BitDefender) and noticed that the network was listed in public, that's why I could not pick up other computers.

  So I checked the network in order to be under this judgment in Bitdefender and everything seems to work now. My surface to pick up the computer and the home group.

  Check your anti-virus firewall settings, perhaps that is the reason.

• create new homegroup n on the same network

  I recently moved in with a family who had set up a homegroup on a network. I'm on the same network, but I want to create a homegroup for myself. When I click on the link in the residential group, the only option I get is to join the current residential group, which has already been put in place. I've read elsewhere, if you change the public network, go to advanced settings, then change back to the home network, it will give you the ability to create a homegroup. But it did not work for me. He immediately returned to a home group with the only option to join. How to set up a second group of residential on the same network?

  Hi Shiv,

  Unfortunately, this is not possible. We cannot create more than one homegroup on the same network.

  Hope it will be useful.

• MBA on the same network arrested in connection and iMac

  I got an iMac and MBA on the same network more than 5 years. Today, he ceased to recognize each other. The MBA, the iMac is listed in the Finder window, but when I click it, window is empty and I have no Conneded. I click on connect as, again and again, and nothing happens. On the iMac, the Finder window list also the MBA and unrelated. Connect as > enter the name and the password. I copied the name of iMac on name and entered the password (even, 10 years), and I get a stirring display.

  That is what it is? Thank you

  Hello ArmandoWyo,

  Thank you for using communities Support from Apple. I know have a problem using your computers Mac 2 together, it's not what you expect. These computers have worked together on the network before, good news as this should be as easy as some basic troubleshooting or setting up sharing on the network again. The following articles will help to solve your problem:

  OS X El Capitan: connect to shared computers and servers for files on a network

  OS X El Capitan: If you do not find the computer you want to connect to

  See you soon!

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• Satellite P100-347 with Vista Premium in the United Kingdom

  I am looking to buy the Satellite P100-347, but I want to get with Vista Premium - no upgrade.
  Does anyone know when this machine will be available with Vista Premium in the United Kingdom.

  Thanks in advance

  Joel

  Hello Joel

  I heard that Toshiba will start notebook with Windows Vista at the end of January 2007. Perhaps the United Kingdom will be starts earlier (perhaps it is also a country, I put t know exactly).

  As you know Vista comes with several different versions, but it will be preinstalled on P100, no one can tell you with certainty.

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.