Phone out time
Can it really be true that when phone face turns black due to downtime, need 1) press the button from the top) 2 unlock the phone, find the phone icon) 3 and 4) push the call button so you can simply end the call (if you don't use blue tooth)?
No, this isn't true at all.
There is a sensor in the upper left corner of the screen that detects the proximity of a person. Its purpose is that when the phone is in your face, the screen should empty and not being sensitive to the touch. In this way, you not press a button by accident during a call. The idea is that if you take the phone to your face to press a button (for example go on speaker, mute or enter an extension number), the phone screen will be available.
HOWEVER (and this is your problem I think) If you hold the phone if your finger is way of coiled around the top left corner, it may be sufficient to activate the proximity with your finger sensor.
Try it. Put the phone in a call and leave it on a table. Now remove your hand closer to the phone, about an inch, the screen turns off. Move your hand back and it is non-empty. Try it with the fingers, same thing. Try now with your finger wrapped around the upper left corner, it will be empty.
You will probably need to get out of the habit of now with this coiled around finger.
The top button is a different state of the shutter screen. However, if you press the button in the appellate courts, you will lock the screen and this replaces the function of proximity detection. I suggest that you do not press the top button.
Tags: Motorola Phones
Similar Questions
-
health that ap on my 6 s iPhone is frozen. I rebooted the phone several times, but it is still frozen. Can someone help please
Hi, Lynne.
Please visit Apple support communities.
I understand that the application of health stops responding on your iPhone 6s. Since this has not resolved this problem, try to force the application to close and test.
If the tags are correct for your position and you run iOS 8.3, be sure to upgrade to the newest iOS available and test.
Update the software on your iPhone, iPad or iPod touch iOS
See you soon
-
Just to have it... went to a walk (80 degrees outside) and pulled my phone out of my pocket and he told me it was cool (with yellow triangle). And then began to show french language on the slider to unlock...
Hey Najeeb1987,
Welcome to Apple Support communities.
It sounds like your concerned with a question that has occurred with your iPhone 5s that caused the temperature warning screen to appear on the device. The article below provides much information about acceptable operating temperatures and the temperature warning screen that should help you to solve the problem.
Keep the iPhone, iPad and iPod touch in acceptable operating temperatures - Apple Support
Ciao.
-
"You have 10 partnerships phone out of the maximum limit of 10 partnerships."
I tried to install my application Mail of Windows 8 with my Hotmail address and it does not connect. After a few minutes I received an email on the two parameters of the e-mail addresses as addresses backup on my Hotmail account, both with the notice "You have 10 partnerships phone out of the maximum limit" authorized 10 partnerships. Now, I get this email every day. I scoured the interface Hotmail.com/Outlook.com nothing works, I can not find anywhere device partnerships. Whenever I do an online search I am assaulted with results on Exchange and Office 365... but I'm in any of these situations. Someone know where I can find this elusive setting?Thanks in advance!Hello
-You get the same error message when you access Hotmail/Outlook.com through webmail?
I suggest to run the Troubleshooter app and see if you can add the Hotmail account in Mail application.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
For more information, see the link.
Application of mail for Windows: FAQ
Let us know the results. We will be happy to help you.
-
Windows defender out time with error next 0x800805b4
Why my windows defender time-out with the error next 0x800805b4
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial:
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this FREE program Autoruns:
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
battery will start swelling and then eventually push my phone out of the box
Firstly does anyone know why my battery swelling, then possibly push my phone outside... my sensor I guess that comes off of my screen because my phone is all black and it would be difficult before, now it is only black... I need help on how I should go all by being able to have all my stuff this phone may be set to a new. also I'd like to know it's OK to continue using this phone and how to prevent my battery swelling :/
< re-titled by host >
Take it to an Apple store
-
Drivers XP for Satellite A100-599-out time?
Can someone tell me the time of it please? (for PSAARE)
Hello
I think it's the same question, as if someone asks you about the weather on March 5, 2058. ;) Just a joke!
I'm sure that no one can say with certainty when the drivers will be available. I know that's not good but support for Vista for the Vista capable units is not finished. Upgrade is always more priority in the downgrade.
-
BlackBerry 10 phone out of control!
I just updated my phone to 10.3.2.555 and whenever I turn off my phone, it resets the settings and the changes I made to the way it was after that I updated. new contact or the deleted message file and restores the phone that's exactly the way. Please help me oooo!
Hi HopeNot,
Welcome to the BlackBerry Support Community Forums
Please try this:
All data are deleted after a manual restart of smartphone BlackBerry 10 and a blue LED is displayed when starting the
http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000036747
Ice
-
SQl query to find out time between the different lines of transactions
(See both images from an attachment to get the clear picture of the data and understand the question correctly.)
I have a set of data like this in one of my paintings. (This is a simple representation of the original data.)
Reference table1.jpg
Id | Type | Value | Start_date | End_date
----------------------------------------------------------------------------------------------------------------------
ZTR0098 | ALLOW | 0 | 1 JUN | 2 JUN |
ZTR0098 | ADTAX | 0 | 1 JUN | 2 JUN |
ZTR0098 | MXTAX | 0 | 1 JUN | 9 JUN |
ZTR0098 | ALLOW | 4. 3 JUN | 15 JUN |
ZTR0098 | ADTAX | 44.00 | 3 JUN | 17-JUNE |
ZTR0098 | MXTAX | 2. 10 JUN | 17-JUNE |
ZTR0098 | ALLOW | 5. 16-JUNE | 20 JUN |
ZTR0098 | ADTAX | 55,34 | 18 JUN | 22 JUN |
ZTR0098 | MXTAX | 1. 18 JUN | 25 JUN |
ZTR0098 | MXTAX | 6. 26 JUN | 31 AUG |
ZTR0098 | ADTAX | 20.09. 23 JUN | 23 JUL |
ZTR0098 | ALLOW | 8. 21 JUN | 31 AUG |
ZTR0098 | ADTAX | 45. 24 JUL | 31 AUG |
each line has a type and a rasthaus id to it. ID belongs to other parent tables. the value of each type is given, and the validity of each value is followed by a field start_date and end_date.
All values start from 1 - JUN and expires on 31 - AUG. Now my requirement is to obtain a report that gives three columns for three different types (ALLOW, ADTAX and MXTAX) with combination of unique values in the effective time interval. Let me put the result below.
Reference table2.jpg
Id | ALLOW | ADTAX | MXTAX | Start_date | End_date
--------------------------------------------------------------------------------------------------------------------------------------------------
ZTR0098 | 0 | 0 | 0 | 1 JUN | 2 JUN |
ZTR0098 | 4. 44.00 | 0 | 3 JUN | 9 JUN |
ZTR0098 | 4. 44.00 | 2. 10 JUN | 15 JUN |
ZTR0098 | 5. 44.00 | 2. 16-JUNE | 17-JUNE |
ZTR0098 | 5. 55,34 | 1. 18 JUN | 20 JUN |
ZTR0098 | 8. 55,34 | 1. 21 JUN | 22 JUN |
ZTR0098 | 8. 20.09. 1. 23 JUN | 25 JUN |
ZTR0098 | 8. 20.09. 6. 26 JUN | 23 JUL |
ZTR0098 | 8. 45. 6. 23 JUL | 31 AUG |
As you can see there are no duplicate rows for a combination of (ALLOW, ADTAX and MXTAX) with their respective dates in force. resulting in the above table. the first step is to convert lines to the column which is pretty obvious to do that by grouping on start_date and end_date colum, but the real deal is the time interval during which the combination of the values (ALLOW, ADTAX, and MXTAX) has remained constant.
I wrote under query using Group by.
Select
ID,
NVL (max (decode (type, "ALLOW", value)), 0) as ALLOW
NVL (max (decode (type, 'ADTAX', value)), 0) as ADTAX
NVL (max (decode (type, 'MXTAX', value)), 0) as MXTAX
Start_date,
End_date
from my_table
Group of start_date, end_date, id
start_date, end_date
the results it gives are like this:
Reference table3.jpg
Id | ALLOW | ADTAX | MXTAX | Start_date | End_date
------------------------------------------------------------------------------------------------------------------------------------------------
ZTR0098 | 0 | 0 | 0 | 1 JUN | 2 JUN |
ZTR0098 | 0 | 0 | 2. 1 JUN | 9 JUN |
ZTR0098 | 4. 0 | 0 | 3 JUN | 15 JUN |
ZTR0098 | 0 | 44.00 | 0 | 3 JUN | 17-JUNE |
ZTR0098 | 0 | 0 | 2. 10 JUN | 17-JUNE |
ZTR0098 | 5. 0 | 0 | 16-JUNE | 20 JUN |
ZTR0098 | 0 | 55,34 | 0 | 18 JUN | 22 JUN |
. .
. .
like wise
but I'm not able to determine the time intervals by using the SQL query.
with
Table1 as
(select the id 'ZTR0098', 'ALLOW' type, 0 val, to_date('1-JUN','dd-MON') start_date, end_date Union to_date('2-JUN','dd-MON') double all the)
Select 'ZTR0098', 'ADTAX', 0, to_date('1-JUN','dd-MON'), to_date('2-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'MXTAX', 0, to_date('1-JUN','dd-MON'), to_date('9-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'ALLOW', 4, to_date('3-JUN','dd-MON'), to_date('15-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'ADTAX', 44.00, to_date('3-JUN','dd-MON'), to_date('17-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'MXTAX', 2, to_date('10-JUN','dd-MON'), to_date('17-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'ALLOW', 5, to_date('16-JUN','dd-MON'), to_date('20-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'ADTAX', 55.34, to_date('18-JUN','dd-MON'), to_date('22-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'MXTAX', 1, to_date('18-JUN','dd-MON'), to_date('25-JUN','dd-MON') of all the double union
Select 'ZTR0098', 'MXTAX', 6, to_date('26-JUN','dd-MON'), to_date('31-AUG','dd-MON') of all the double union
Select 'ZTR0098', 'ADTAX', 20.09, to_date('23-JUN','dd-MON'), to_date('23-JUL','dd-MON') of all the double union
Select 'ZTR0098', 'ALLOW', 8, to_date('21-JUN','dd-MON'), to_date('31-AUG','dd-MON') of all the double union
Select 'ZTR0098', 'ADTAX', 45, to_date('24-JUL','dd-MON'), to_date('31-AUG','dd-MON') of the double
),
days like
(select level - 1 dte + to_date('1-JUN','dd-MON')
of the double
connect by level<= to_date('31-aug','dd-mon')="" -="" to_date('1-jun','dd-mon')="" +="">=>
)
Select id, allow, adtax, mxtax, min (dte) start_date, max (dte) end_date
(select ID, dte, max (allow) allow, max (adtax) adtax, max (mxtax) mxtax,
ROW_NUMBER() over (order by dte) row_number() - courses (partition by order max (allow), max (adtax), max (mxtax) by dte) gr
go (select id, dte,
-case when type = 'ALLOW' and dte between start_date and end_date then end val 0 otherwise allow.
-case when type = "ADTAX" and dte between start_date and end_date then val 0 otherwise end adtax.
-case when type = "MXTAX" and dte between start_date and end_date then val 0 otherwise end mxtax
Table 1 t,
days d
where d.dte between t.start_date and t.end_date
)
Group by id, dte
)
Group by id, gr, allow, adtax, mxtax
order by id, gr
ID ALLOW ADTAX MXTAX START_DATE END_DATE ZTR0098 0 0 0 01/06/2015 02/06/2015 ZTR0098 4 44 0 03/06/2015 09/06/2015 ZTR0098 4 44 2 10/06/2015 15/06/2015 ZTR0098 5 44 2 16/06/2015 17/06/2015 ZTR0098 5 55,34 1 18/06/2015 20/06/2015 ZTR0098 8 55,34 1 21/06/2015 22/06/2015 ZTR0098 8 20.09 1 23/06/2015 25/06/2015 ZTR0098 8 20.09 6 26/06/2015 23/07/2015 ZTR0098 8 45 6 24/07/2015 31/08/2015 Concerning
Etbin
-
WHY MY INTERNET LIVING LOG OUT TIME AND TIME AGAIN?
Why my internet disconnected to keep minutes and you reconnect again and again unplug new over2... I never have this issue before...
it keep "Request timeout for icmp_seq" and reconnect... it's because I have updated to OS X El Capitan? or something else? I did restart the router, turn on/off my wifi, I restart my macbook twice... and nothing happens it always disconnect again...
I have check the section "Network Diagnostics" my wifi is not serious, wifi setting is correct, network setting is correct, but my ISP keep disconnecting
but the strange thing is that all of my roommates have no problem with the connection or ISP, only my Macbook Pro...
is there any solution for this?
thnk you
MacBook Pro (retina, 13 inch, mid-2014)
2.6 GHz Intel Core i5
Iris 1536 MB Intel
OS X El Capitan 10.11.6
Hey Kyon1995,
Thank you for being a part of the communities of Apple Support.
To help solve this problem when your Mac is unable to keep the Wi - Fi connection to your network, follow the steps in the link below to run Wireless Diagnostics:
Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac.
See you soon.
-
BlackBerry Smartphones Answerphone out time
Hi new to Blackberry
Is there a number of rings before answering machine is applied & I can deal with that and that I can leave a personal message, or is it to do with my operator Orange?
Thank you
Hello
NVP wrote:
Hi new to Blackberry
Is there a number of rings before answering machine is applied & I can deal with that and that I can leave a personal message, or is it to do with my operator Orange?
Thank you
Yes the issue of Orange, but you may be able to solve sounding voice mail and selecting the option settings and features.
-
Directly enter values for the fade in/out time and linear value.
Sometimes, I like to apply fades and dissolves by directly entering the duration - that is to say "60 frames" or "2.5 seconds." I would like to be able to do in order to quickly make some bland identical to others or specifically to make much longer or shorter. I see how to recover the box fade and drag it to change the duration and the linear value of fades, and I see that I can select a specific duration on the timeline and manually, drag the fade to match this term, but it would be much easier if I could just enter the numbers both the duration and the linear value. Audition offers a way to do this? Note that I want to do in the multitrack Editor so that it is non-destructive, so the "Envelope Fade" effect does not work for this.
Thank you.
lalittle wrote:
Audition offers a way to do this? Note that I want to do in the multitrack Editor so that it is non-destructive, so the "Envelope Fade" effect does not work for this.
Thank you.
Not that I know unfortunately.
-
BC Slow and Timed Out time Admin &; website
Is anyone else know extremely slow and/or meeting expired sessions while admin and on their website?
In my view, it has been resolved an issued login has expired, but I always attack who suffer and CYBER MONDAY of every day!
Ideas,
Thank you - Anne
Nope seems all good now. Thank you very much!
Anne Gerber
210-382-9051.
-
I dropped my phone in a short distance and when I picked it up it the screen was black. However, the sound still works as I changed the switch works for her and he made noises. I also slightly see the apple logo when I turn on my phone and you can see the switch when I try to turn it off, but it is not entirely displayed, I can't see it in very dark rooms. I tried to reset the phone several times using the Lock and Home buttons at the same time and we have tried to connect it to iTunes to reset, but it does not connect due to having unlock my phone, I can not do. Any help would be appreciated.
Hello CaffNutt,
Thank you for using communities of Apple Support.
I see that you get a black on your iPhone screen, even if it is enabled. I would recommend that you take a look at the following article:
Get help with the screen on your iPhone, iPad or iPod touch
The first two sections seem more relevant.
Best regards.
-
I want my pictures to download on my iCloud but I don't want all my previous photos on my phone because there are just a lot of space and I have run out of space. Can I disable the download of photo sharing but allow for photo streams to make this or how can I make this happen? I just want to still my photos go to my Mac and iCloud so I can have my photos without danger...
Thank you
N °
iCloud is a synchronization service, NOT off of storage of the unit.
You could cut the phone out of sync from your library. Just move them to your Mac and synchronize your Mac with iCloud. Now, you'll have plenty of space on your phone, but no pictures.
From your Mac, you can then make an album with photos that you want to access from your phone. This will require ongoing work, but will keep your clear phone in most of the time.
Maybe you are looking for
-
Hello I lost the original power adapter for my Camileo H10, which allowed me to recharge the camcorder and use it at the same time. Who can tell me where to buy another? Thanks in advance. Tom
-
Lenovo Z570 - how to disable automatic brightness adjustment?
It's driving me absolutely crazy! This only happens when I run the laptop out of the battery. And when I go to a website with a dark background, the display automatically dims down. Then when I'm on a brighter site, then screen lights back up again.
-
It's a my router belkin54GThings ive not tried no metal of any kind anywhere around my connectionNo cordless or cellular phones around not even on the same floormy firewall on my computer is turned off and the system has been set up to work together,
-
my hp advanced battery system diagnosis test report this msg ID:0LPXKW - 5QW860-QFPH5A-C0BW03 FAILURE PRODUCT ID: XX049AV #ABD
-
Laptops DV 6 series drivers Windows 7?
Just did the upgrade to W7 and it went well, but the only driver W7 posted for my dv6915nr is for WiFi. My Ethernet hardware does not work - must clear an update of the driver. What are the drivers for this machine which is only one year to come?