Phone Pro U500 will not start

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Satellite Pro L10 will not start - the LED blinks

  I have a pro l10 phone which, after sutting down as battery not return to life. All I get is 8 flashes on battery led when the button is pressed. It's the same area only, battery only or both.

  It sounds bad
  Generally, the laptop LED flashes as there might be a hardware malfunction.
  The LED provide a microcode and the technician can read this code.
  A common user is not able to read. OK maybe you can read it, but you will not find any description about the meaning of the code.
  That is why it s a good idea to contact the technician in your country

  But as a first step, try this:
  Remove the battery and unplug the AC adapter.
  Wait 20 - 30 minutes and then plug in the battery and plug in the AC adapter.

• Windows xp pro sp3 will not start corrupted boot.ini and hal.dll - please help

  I installed Norton 360 offred via internet was last updated.  It immediately launched all applications previously disabled at STARTUP in msconfig.  And shortly after he started to gives me the blue screen "to the death".  This done in two days, and I was desperately trying to solve the problem by turning off almost all applications critical to running Windows XP Pro SP3, Norton and Office 2007 Home and student.  I even went and tried to edit the Boot.ini file in startup and recovery under the Advanced tab in the workstation properties.  Now all I get is an error message Windows cannot start because the hal.dll file is missing or damaged.  I replaced it by copying a modified version of the boot sequence, while the hard drive of my laptop was enslaved to my desktp PC, but nothing helped.  I can't even the Recovery Console to start on my laptop.  I need HELP, please.

  These profile errors are usually caused by one of the following:

  1-profile corruption.  The user profile is damaged and that Windows cannot load.  To resolve this issue, create a new user profile and move your files to the new profile.   See here for more information:

  How to copy data from a corrupted to a new profile in Windows XP user profile

  2 drives or corruption of the file system.  Run chkdks /f on the volume C:.  Please note that there is ALWAYS a risk of data loss when chkdsk is run on a volume, ideally, you should have a backup of your files before running chkdsk.

  3 - virus or malware activity.  Some of these parasites can revoke your permissions on the folder of your profile, check the permissions on "C:\Documents and Settings\Andre" and make sure you have a full control on the folder.  Check this box until you try #1 or 2 above.

  Some of these parasites can also revoke your permissions in key areas of the registry and create real Dany on the machine that can prevent you to run some of your software.  Use Regedit to load your old profile hive (NTUSER. (DAT) in your profile folder (C:\Documents and Settings\Andre\NTUSER. (DAT) and make sure you have full control over the key.  In the advanced security settings to ensure that the child objects are inherit permissions from the parent and put a check mark on "replace entries permissions for all child objects...". "Click on apply and OK your way out.  See here for easy to follow instructions for loading and editing of remote registry hives: http://www.rwin.ch/xp-live/regedit.htm make sure you unload the hive when you're done, otherwise the changes will not be saved.

  These parasites can also revoke permission on the other key of registry and system files, you can use SubInACL to restore your permissions on these key objects, see here for more information:

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  John

• Satellite U500 will not start

  Hello

  I have a problem with my Toshiba U500 after I installed additional 2GBs of ram that the laptop does not start.
  He died immediately after, after I press the turn on button.

  The leds blink normally.
  I already tried to remove the new RAM and tested new and old memorys in different locations.

  I also tried to reset the bios by removing the cmos battery, but it seems that you cannot be disconnected.

  Any help would be appreciated.
  Sorry for my bad English and thanks in advance.

  Hi mate

  Notepad starts correctly using the old modules shipped with the laptop?

  In my opinion, you bought RAM that is not fully compatible with the laptop or BIOS.
  In this case, you should test the device with other modules of RAM of the manufacture of some users here in the forum reported problems with the essential modules I use Kingston modules and my notebook starts fine

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro L500 will not start on battery only

  Hello!

  I recently bought a Satellite Pro L500 and have the following problems.
  My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
  The only way to get this light off is to remove the battery.

  Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
  Works quite normal, once started - with or without power connected

  SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
  I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

  After having this problem, I've updated to the latest version of the BIOS but nothing helped
  Tried a different battery and did not help
  Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

  Very annoying!
  Please anyone with a solution?

  Hello

  Try this.
  Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
  Together the two parties again, charge the battery and then remove the power adapter.
  Then try to turn on the unit using only the battery.

  If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

• Satellite Pro A60 will not start up CD/DVD

  I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

  Paul

  Hello

  How did you try to boot from the CD drive?
  Have you tried to press the C key immediately after starting the laptop?

  Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.

• Satellite Pro A120 will not start

  Sorry for the bad English!

  My computer does not start.
  I want to install a BIOS but plugging it into another computer, but I don t know how?

  I think it s not a faulty BIOS, but I think that the virus on your laptop caused this problem.
  The error message says it all:
  + Malware accesses the memory read +.
  + bios problems +.

  If you are not able to boot up the laptop, or on the CD recovery, (XP, Linux) bootable CD or HARD drive, then it s a serious problem and you should certainly contact the ASP in your country.

  If you are a lucky man then the ASP technician would be able to flash the BIOS ROM by using a special procedure and the laptop should work again.

  Good bye

• Satellite Pro L10 will not start

  Hi guys,.

  I have a Sat Pro L10 and I have a few problems with it. When I load up, I can enter the BIOS and everything seems fine, however, the date and time does not. I can't ge start beyond that point, it crashes just with a cursor flashing at the top left. The same goes for when I try and boot from CD. When I go out and put the battery back, I get a message saying WARNING CMOS Checksum failed - using the old configuration, F1 to resume or F2 to enter setup. I press F1 and the same again, just a flashing crusor.

  If anyone can help me diagnose this problem and fix it, it would be much more appreciated.

  Best regards
  James

  Hello

  At first read s manual, page 100 as well as page 104. You will find explanations on CMOS Checksum failed.

  To have fully loaded CMOS laptop battery must be powered ON 24 hours.

• Mac Pro 2009 will not start, no edge

  On Thursday, June 16, I sat to use my Mac Pro early 2009. I noticed that my Mac would not wake up by mouse click or the SPACEBAR on the keyboard. The led on my Mac, so I immediately thought that it was a problem with the graphics card.

  I force shut down the Mac by holding the power button. I waited 10 seconds and turned on my Mac back, everything was fine and I worked on my Mac for 3 hours.

  Last night 18 June I sat watching television when I heard the ringtone on my Mac Pro, I realized was a reboot. I went to the wire and connected and everything seemed fine. However later in the evening, I noticed a flashing LED on one of my two monitors. Once the Mac was on (fans spinning) but no signal to the monitor.

  I made another force off now the power button on Mac, but now when turn on the Mac there is no boot chime or control signal.

  I upgraded the graphics card to an AMD Radeon Sapphire HD 7950 in April 2013.

  Any advice would be much appreciated as I'm in the middle of a big project.

  Could also be a Mac Pro RAM chip inyour failure, sounds almost identical to a question I've had recently, I found the missing question when I removed the memory card.

  If one of the pair of cards, you will need to remove two cards.

  Try taking the memory OUT n test each module one at a time. Also check RAM editing maps, if none of the four lights on the two cards is turned on it idicates a defective module.

• Satellite Pro U500 will not load

  Hi all

  I have a little used old U500 of 2 years, and I am puzzled.

  A few weeks ago I noticed my light on and it would not charge battery charge.
  I didn't watch the charger light on the transformer - which was lit, so ended up paying £20 for a battery note that it would not yet of course load wasn't a bad battery.

  On the plug-in transformer/charger light showed green so I guess then it must be a faulty Jack inside my machine because there was able to get out the transformer plug / the green light is on.

  Today I disassembled the machine and I have replaced the plug connector on the motherboard - no problem, it starts and it is not yet taken on a charge. I have spent £30 on this piece of cr@p so far, should I now buy a new cable from charger etc?

  I have a faulty plug/transformer - despite the green light showing that is powered or is there anything else I can try?

  The charge or power on my laptop light is lighting up.

  Help, please!

  see you soon
  Craig

  Hello

  I would be really surprised if someone here would be able to tell what's wrong with the laptop, I doubt that this is possible without test equipment and execution of some hardware diagnostic tests.

  > Have I not a defective/transformer Plug - despite the green light showing that is powered or is there anything else I can try?

  I don t think that the power adapter is faulty. As I understand you, the laptop features and you can use it plugged in. This means the AC adapter to power the laptop and this means that the adapter is ok.
  In General, you should be able to use the laptop, even if the battery is removed. So in my opinion, it seems like that the question must be related to electronic on motherboard problems because the new battery does not solve this problem of load

  By the way: it's your BIOS up-to-date? Would be interesting to check this

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L100 will not start setting in motion

  I live in the UNITED Arab Emirates.
  My friend in the United Kingdom made me this laptop and it does not turn it on. However, if I remove the battery and put back again its just trying to throw the lights flash and it turns off again.

  I tried with just battery plug into the socket to battery power when the power plug is inserted, it tries to start and turns off again. So if I remove the plug and put it in the system tries to start but shuts down.

  Can u let me know what should be wrong and how can I sort?

  Hi Martin

  Sorry to say, but it looks like a hardware problem and it is not easy to say what could be wrong without checking the laptop only computer parts.
  It could be any malfunction of the motherboard or CPU fault.
  Maybe a power electronic malfunctions.

  However, I don t think you will be able to solve this problem yourself and get the notebook running without any additional help.

  You really should contact the service point in your country for more details
  Good luck