Satellite Pro U500 will not load

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Satellite Pro A200 does not load if current enforcement

  Hello

  I have a new Toshiba Satellite Pro A200 on Vista. I have a problem with the power adapter and charge socket.
  It will start and run very well and when turned off will charge the battery of fine food. But when running, the machine automatically runs battery, no network and does not load.

  This means that the battery is sinking and ended up to be recharged so just off the coast.
  When the power supply is removed and then reinserted, it will load for maybe 30 seconds, then stops to load again initially and continues to run on battery.
  At the same time, the blue light of indication on the front of the machine lights up to indicate that the ESA is connected and detected, and on battery defiler on windows in States ' ac connected, not charging battery "-in other words it works of ac and is detected but the machine isn't use to run power supply or load unless it is turned off...

  Can anyone offer a solution?

  Thank you

  That s very strange and I guess that this problem could be linked to the hardware problem.
  Either it's a defective battery or there is something wrong with the electronic power supply on the motherboard.
  In my opinion, there is only one way to know what's wrong some diagnostic tests are needed.
  This test can be performed by a technician of the ASP.
  That is why it s advisable to contact an ASP in your country for audits.

  This is a new laptop and warranty should cover everything!

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Satellite Pro 4340DVD will not initialize - pci.sys missing or corrupted

  I bought a Toshiba laptop Satellite Pro 4340DVD model # PS434C-3N152, Serial # Y0018185J, off E - Bay.
  The original operating system, Win 98SE has been upgraded to Win XP Pro. No disc don't came with the laptop.
  The laptop crashed yesterday while I was online and will not initialize to top.

  _Error message reads: _
  + The following file is missing or corrupt: System32\DRIVERS\pci.sys.+

  Any suggestions on how to fix this problem would be highly appreciated. I would love to have a manual for this camera, but have not been able to find one.

  Thank you!
  Sam

  Good news!

• Phone Pro U500 will not start

  Cannot start my Pro U500, when I press the power on button of the projector must enter, there is a kind of noise as the HD tries to start, then everything goes off, then about 5 seconds later turn it on again and he's trying to start again, with the same result, it might take for me to leave power.

  All ideas, took out the battery and power left and it's still there, held the power button for a minute to reset the motherboard, but nothing.

  Paul

  Hi portellen,

  Official website of Toshiba, I found an interesting article on this subject:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  I hope it works and if not, it seems to be a hardware malfunction, but if your laptop is under warranty, an authorized service provider can solve this problem for free. :)

• Satellite Pro 6100 will not turn on - flashing LED

  Hello

  I have a probelem big, my Toshiba Satellite Pro 6100 lights so I decided to buy a new motherboard @ ebay.

  I have to build in and all I get is an orange error code. So I decide to make me buy a testet PCB (Powerboard) on Ebay, then the same thing! Then I bought a second Geforce but the same error code! So I all exchanged but the processor and I'm ascendant to buy a second to test or do you know Whata´s evil?
  I don't think that the new parts are broken!

  The error, the code of the orange Led is 01000011 or short, long, short, short, short, short, long, long and I did not see what maybe the problem!

  Sorry for my broken English I come from Germany!
  Hope for answers and greetings

  problemman

  Hello

  How do you know what the flashing of led said you? You are a sort of technician? How can you know that the "blink" (long, short) are 0 and 1.
  Do you know how to assemble the circuit board and don't you know that the things you have take care? Who PCB´s that you have exchanged?
  You said:

  Hand and VGA

  but the powerpcb too? And how do you know that the PCB´s are ok? Because why someone is selling you that with the 'work' of description?

  Would appreciate some feedback from you

  Welcome them

• Satellite Pro L10 will not start the system

  Hello!

  I have a Toshiba Satellite Pro L10, which won't work for some reason any.

  The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

  It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

  There is also a 30 second countdown if I do nothing the portable samekh automatically.
  It is, none of these things work.

  Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

  He did about 50 times now and still nothing.
  I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

  Help, please!

  If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

  hope this makes sense and I gave you all you need to know.

  Thanks, B

  It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
  If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

  In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.