PhoneGap Build cannot find plugin NPM nl.kingsquare.cordova.background - audio

Similar Questions

• Cannot find plugin camera raw 8.4 so I can edit files IIQ of my camera a picture of phase. I checked the list and my camera is compatible

  The camera is very expensive. top of the range. I use LR for years and I love it, but I may change if I can't find a solution.

  IM using lr 8.4

• Generation of PhoneGap Blackberry error. The system cannot find the specified file

  I am new to using PhoneGap and I try to configure the sample application, I use PhoneGap version 2.9.0 and apache-ant - 1.9.1.

  I have configured apache ant, installed the SDK WebWorks and have configured the project.properties file.

  The error seems to be that it can't find the 'CordovaExample' file in the temporary folder, I checked the file and it contains the following files in it: "CordovaExample.jdp", "CordovaExample.jdw" and "CordovaExample.rapc" (among others). Am I missing some configuration so that it can look for one of these 3 files, instead of just "CordovaExample"?

  The error is given below, using the command "ant build blackberry":

  jamest@JT1 /c/Development/FirstApp
  $ ant blackberry build
  Buildfile: c:\Development\FirstApp\build.xml
  
  blackberry:
  
  build:
  
  generate-cod-name:
       [echo] Generated name: CordovaExample.cod
  
  clean:
     [delete] Deleting directory c:\Development\FirstApp\build
  
  package-app:
      [mkdir] Created dir: c:\Development\FirstApp\build\widget
       [copy] Copying 22 files to c:\Development\FirstApp\build\widget
        [zip] Building zip: c:\Development\FirstApp\build\CordovaExample.zip
  
  build:
       [exec] [INFO]                      Parsing command line options
       [exec] [INFO]                      Parsing bbwp.properties
       [exec] [INFO]                      Validating application archive
       [exec] [INFO]                      Parsing config.xml
       [exec] [INFO]                      Populating application source
       [exec] [INFO]                      Compiling BlackBerry WebWorks application
       [exec] I/O Error: C:\Users\jamest\AppData\Local\Temp\widgetGen.584154969137
  3014448670.tmp\CordovaExample (The system cannot find the file specified)
       [exec] [ERROR]                     RAPC exception occurred
  
  BUILD SUCCESSFUL
  Total time: 8 seconds
  

  This has now been resolved - the problem was that I used JDK 1.7, this problem was solved by switching to JDK 1.6.

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Problem with the library: need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  Hello

  I have the application developed by WebWorks 2.0. After a year, I need to get the new version of my app, but when I install and run my application on the device, the application displays an error message:

  Need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  I don't understand why I have this error, because the original version of my application works very well.

  I read a lot of posts on the forum but none of the posts helped me.

  The post office

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/require-error-can-t-find-usr-lib...

  and the post

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/deploy-WebWorks-app-into-device/... says I have to add the library. But I use only the push notification and push notification does need that com.blackberry.push and com.blackberry.invoked.

  Does anyone have any experience with the problem? Or does anyone have any ideas how to fix?

  onesto

  Hello chadtatro,

  Thanks for your tip.

  My problem was that I did not define cordova directory in the environment variable windows. When I added the cordova directory to the path in environment variables, my problem has been resolved.

  It is necessary to have a set of cordova in the command line in the case that your application uses a library of cordova.

  There are link setting cordova:

  https://Cordova.Apache.org/docs/en/5.0.0/guide/CLI/index.html#Add-plugin-features

• Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

  Hi all

  I have created a native extension in the BB SDK 10.2 to connect to data services and request a server using the CellualarDataInterface API.

  It was packed, but when I run it in Simulator or device, it shows error:

  Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

   

  I read that it is the link error but not able to identify the problem.

  Here's the URL where my BB 10 code example is hosted:

  http://www.filedropper.com/SampleApp (Go to this link and click Download this file)

  Please help me find the solution. It is very urgent.

  Finally, I solved this error by adding the network of Qt library.

• Ripple can not build app Playbook: the system cannot find the path specified.

  Not a huge surprise here, but I tried to compile my app for Playbook in undulation. After following all the steps of downloading all the SDKs, get and save new keys, have all the files in place, etc.. Ripple can simply with:

  Oh Snap! Build request failed with message: The system cannot find the path specified.
  

  Without rhyme or reason. No way to detect what it is. Ripple is dangerously wrong sometimes. And the "Oh Snap!" part is terribly boring.

  I was able to build the application via command line (which requires you to make a zip file of everything manually... * sigh *).

  Anyone know how it is possible to debug?

  Hi shnuffy,

  Assuming that the Tablet is the installation folder which includes bbwp and jre, you'll want your SDK path pointing there. Example:

  C:\BBWP\tablet

  For example, my Tablet SDK is installed in this folder that is used in my Path SDK:

  C:\Program Search SDK WebWorks Motion\BlackBerry to Tablet 2.2.0.5

  Note that I am assuming that your path refers to the folder that contains bbwp.exe, but you really want to make a folder of higher level.

  Other paths seems fine. Can you give than to try and confirm if you still have questions?

  Erik Oros

  BlackBerry Development Advisor

• No audio Media plugin using Phonegap Build on Android

  I am building an application that includes reliable audio playback in all of our target platforms and intended to use the media for this task plugin.  I was previously using the native object Javascript Audio, that seemed to work well on some Android devices, but did not work at all on others.  I have implemented the Media plugin in my project, but this day don't have not yet to have successfully play back audio on any of my devices to test and try to identify what I am doing wrong.

  My application should hopefully also run on a desktop browser, so I have a 'phonegap sniffer' in my javascript.  From there, we either start the application on the events of deviceready on mobile devices or document.ready on desktop devices, which seems to work well.

  var is_phonegap = navigator.userAgent.match (/ (iPhone: iPod: iPad |)) Android | BlackBerry | (IEMobile) /); USE DATA USERAGENT TO GUESS AT IF IT IS A DESKTOP APP PHONEGAP BROWSER OR HAS

  IMPLEMENT THE APPELLANTS TO THE DEVICE_READY FUNCTION: ADD EVENT LISTENER FOR PHONEGAP AND ADD DOCUMENT. READY FOR THE DESKTOP

  If (is_phonegap) document.addEventListener ('deviceready', device_ready, false);

  else $(document) .ready (device_ready);

  function device_ready() {}

  Console.log ("is phonegap? ' + (is_phonegap)? 'true': 'false'");

  ...

  }

  All the sound elements within the app are called by a function of play_sound:

  function play_sound (audio_file) {}

  var path = ' audio /' + audio_file;

  If (is_phonegap) var audio = new Media (path, null, media_error); IF IT IS AN APPLICATION, USE THE MEDIA PROVIDED BY THE PHONEGAP PLUGIN OBJECT

  else var audio = Audio new ("audio /' + audio_file"); IF IT IS ON THE DESKTOP, USE THE AUDIO OBJECT PROVIDED BY CORE JAVASCRIPT

  Console.log ("audio:" + JSON.stringify (audio)); INSPECT THE AUDIO OBJECT TO SEE WHAT IT LOOKS LIKE

  audio. Play(); PLAY THE SOUND

  }

  Since the media Builder allows an onError callback, I configure that as well:

  function media_error (e) {}

  Console.log ("media error:" + JSON.stringify (e)) ;// CHECK the ERROR TO SEE what IT LOOKS LIKE

  }

  I'm testing by running Phonegap Dev on an android device connected to Phonegap Office so that I can make use of console.log debug messages.  When I run the application and try to play a sound, I get the following output:

  is phonegap? true

  try to play the audio file: audio / shuffle.mp3 / / THIS FILE IS LOCATED IN THE/WWW/AUDIO/SHUFFLE PROJECT. MP3

  Media error: {"code": 1} / / this IS THE output OF THE MEDIA ERROR HANDLER

  I have ready in several discussions on the Media on Android plugin requirements of additional paths and believe that I have implemented the recommended solution (by Audio doesn't work for Build Android), but this does not help things.  I have changed the above to:

  
  

  function play_sound (audio_file) {}

  var path = platform_specific_audio_path ("audio /' + audio_file"); / / RUN PATH THROUGH PLATFORM FUNCTION

  If (is_phonegap) var audio = new Media (path, null, media_error);

  else var audio = Audio new ("audio /' + audio_file");

  Console.log ("audio:" + JSON.stringify (audio));

  audio. Play();

  }

  function platform_specific_audio_path (file) {}

  If (typeof peripheral == "undefined") return files;

  return (device.platform.toLowerCase () == 'android')? "" / android_asset/www / "+ file: file;

  }

  Use this version of the code displays the following:

  try to play the audio file: /android_asset/www/audio/shuffle.mp3

  Media error: {"code": 1}

  It seems that I am getting the same result of error of one of these paths.  I guess that's a path issue but are still to confirm it somehow.  I'm not familiar with how files are built within the app.  Is there a solution for this or can anyone identify what am I doing wrong?  Thanks a lot for any assistance.

  In light of your comment, you use the developer PhoneGap app in your workflow. It is the root of the problem you are experiencing. Using the Desktop App PG or 'phonegap serve' changes nothing (and it should be noted that none of these applications actually build your application.) They serve only the files using a web server.)

  The PhoneGap developer App is the app that run you on your mobile device to connect to PhoneGap Desktop App or "phonegap serving." It comes prebuilt with a selection of plugins, including the Media plugin. So why you can instantiate the class of media and see the properties and methods. Verification of the existence of these properties and methods only serves to check if the plugin is installed, not if the plugin will work correctly.

  In view of your code and the associated error message, you are trying to read a property grouped the app file. When your application is running in the application of the PhoneGap developer, however, no mechanism exists to physically push assets being served in assets grouped Application Developer PG. As a result, demand for game fails because the file is not found.

  A temporary workaround solution just to check that you can, indeed, play a media file would be to change the path to something like this:

      http://dev-machine-IP-address:PG - use-port/www/shuffle.mp3

  However, this is not what you'll want to have long-term in the production code. Instead, you must create a version of your application that you can run it directly (without using the App Developer PG or PhoneGap Serve).

  To do this, you can run (with your Android device, attached and assuming you have the Android SDK installed correctly):

  phonegap $ run android

  This should create a version of your application, including your multimedia files in the bundle and then run it on your device. You should then be able to play multimedia files that you try now.

  Otherwise, you can use the service of Cloud Computing to the PhoneGap Build to create a version of the app:

  Android construction distance phonegap $

  You can download the application resulting on your phone and it should work as well.

  Long-story-short: the developer PhoneGap App isn't a perfect representation of the environment that will receive your built apps. Do not rely on the PG Dev App to simulate an environment perfectly. at one point, the only real criterion is to build your application and install it on a device.

  Hope that helps.

• EM12c: Cannot find the House discovered for plugin id:oracle.sysman.db

  Platform EM12c:
  Oracle Enterprise Linux 6.2 (x86_64)
  Oracle Enterprise Database 11.2.0.3 (x86_64)
  Enterprise Manager Cloud control Release 1 (12.1.0.1) 12 c (x86_64)
  --------------------------------------------------------------------------------------
  Problem:
  EM12c > objectives > databases > add
  Discovery of targets on the host: mcsdbora1.esri.com
  mcsdbora1. ESRI.com - cannot find the House discovered for plugin id:oracle.sysman.db
  --------------------------------------------------------------------------------------
  Notes:
  -Mcsdbora1.esri.com host is "Microsoft Windows x 64 (64-bit)"
  -EM12c is on Oracle Linux 6.2 (X86_64)
  -J' downloaded the latest version of the software Agent before adding the host
  "" EM12c > Setup > extensibility > Auto Update "before adding the host" "
  -Mcsdbora1.esri.com host is listed under "EM12c > objectives > Hosts".
  
  I found these articles in the support.oracle.com
  
  "How to manually add targets to the database in 12 c Cloud Control [ID 1371846.1]"
  
  "How to deploy the latest Plugin from database to the WHO and the Agent in 12 c Cloud Control [ID 1388143.1]"
  
  This last article, says updated the plug-in "Oracle Database". I checked and I do turn more later 12.1.0.1 connect.
  
  I wonder if I can only solve this bug, if I upgraded to Bundle 1 Patch (12.1.0.2) and install the 'Oracle' plug-in 12.1.0.2 database?
  
  Thank you
  
  Marcelo
  --------------------------------------------------------------------------------------

  BP1 is required for the management of the goals of Windows. So, you need to first upgrade your Linux WHO to BP1 and apply a few spots on the top before you can deploy plug-in on Windows machines. Support can provide you with the details.

• PhoneGap Build plugin Don t work

  I m using edge Code CC on my mac. The work of Don t Phonegap Build plugin. I have can´t send files or anything like that.

  Thank you

  Alex

  Hi Alex, unfortunately it is a problem known as of now. I am hoping to update the plugin this week, so it does not work with new versions of Code of edge and consoles.

  = Ryan

  [email protected]

• PhoneGap build on mac error

  I tried to get PhoneGap works on my mac. When I build a debug version, it gives me this error:

  [BUILD] The application of filling source

  [BUILD] The analysis of config.xml
  [BUILD] Generation of output files
  [WARNING] Cannot find the debugging token
  [ERROR] Tools BBNDK is not found. Please make sure that you have installed the SDK native BlackBerry [http://developer.blackberry.com/native/] and the path configured via the bbndk-env script.

  Where can I configure the location of my debugging token? The BBNDK is installed and I executed the script of bbndk-env. Don't know what I did wrong here.

  Hello

  Thanks for reporting this.

  You will need to run ' source bbndk - env.sh "and you can confirm it worked by running" that blackberry - deploy. "

  The warning about the debugging token can be ignored. It is not generated until you use the run script.

  We will clean up to make it more explicit error messages.

• cannot find configuration debug «backberry t air application»

  Hello

  I use Flex 4 plugin for eclipse. I tried to create my first application by following the steps in the guide started it. After writing a code I tried to adjust the cnfiguration of Debug as mentioned in the guide, however, I discovered that I don't have Blackberry applications of compressed Air as a type of cnfiguration of debugging in the Debug Configuration screen.

  When installing Backberry t Air SDK, I found following a non-fatal error in logs

  Custom action: com.zerog.ia.customcode.util.fileutils.CopyFile
  Status: ERROR
  Additional notes: ERROR - class com.zerog.ia.customcode.util.fileutils.CopyFile NonfatalInstallException C:\Program Files\Adobe\Adobe Flash Builder 4 Plug-in\sdks\... \dropins\blackberry-Tablet-SDK.Link (the system cannot find the path specified)

  Thank you

  OMKAR

  From this thread:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/installation-of-Tablet-SDK-finish...

  And this thread:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-AIR/Flash-Builder-4-does-not-have-the...

  This was the fix:

  «In the folder Tablet OS SDK installed, there is a subfolder 'Eclipse', inside, there is a file called "blackberry-tablet - sdk.link".» Copy this file into your Eclipse 3.6.1 "dropins" folder, restart your Eclipse IDE, you should see the PlayBook Tablet OS SDK in your launch configuration. "

• How to lock the orientation in the PhoneGap Build

  I'm trying to transfer a game on Android with PhoneGap Build JS/CSS/HTML and I need to lock the rotation to the landscape, but I can't find a working online solution.

  I tried to put it in the config.xml file, but it does not work:

  <preference name="orientation" value="landscape" />
  

  And I found others online who say to change the AndroidManifest.xml, but I can't find it in my project PhoneGap folder I have these files:

  -.cordova (empty folder)

  -hooks (empty folder)

  -platforms

  -browser (contain default phonegap site/app)

  -platforms.json

  -plugins

  -www (contain the site's html/css/js files I want to put in an Android app)

  Thanks for your help!

  This could be your problem. The config.XML and index.html file must be in the same directory and that the the root of the zip file you publish PhoneGap Build. The hooks, platforms should not be included in the zip file.

• Maven configuration cannot be applied: cannot find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

  Using Maven 3.2.5

  on Mac OS 10.10

  with mvn--version

  akmac2:enpit-sample-hr-maven ak$ mvn -version
  Apache Maven 3.2.5 (12a6b3acb947671f09b81f49094c53f426d8cea1; 2014-12-14T18:29:23+01:00)
  Maven home: /Applications/Developer/apache-maven-3.2.5
  Java version: 1.7.0_25, vendor: Oracle Corporation
  Java home: /Library/Java/JavaVirtualMachines/jdk1.7.0_25.jdk/Contents/Home/jre
  Default locale: de_DE, platform encoding: UTF-8
  OS name: "mac os x", version: "10.10.1", arch: "x86_64", family: "mac"
  

  
  

  Following the documentation to configure repository maven.oracle.com on http://docs.Oracle.com/middleware/1213/core/Maven/config_maven_repo.htm#MAVEN9010

  my settings.xml

  <servers>
  ..
   <server>
      <id>maven.oracle.com</id>
      <username>myOTNMailadress</username>
      <password>bla</password>
      <configuration>
        <basicAuthScope>
          <host>ANY</host>
          <port>ANY</port>
          <realm>OAM 11g</realm>
        </basicAuthScope>
        <httpConfiguration>
          <all>
            <params>
              <property>
                <name>http.protocol.allow-circular-redirects</name>
                <value>%b,true</value>
              </property>
            </params>
          </all>
        </httpConfiguration>
      </configuration>
    </server>
    </servers>
  
  <profiles>
   <profile>
        <id>oracleProfile</id>
        <activation>
          <activeByDefault>true</activeByDefault>
        </activation>
        <repositories>
          <repository>
            <id>maven.oracle.com</id>
            <url>https://maven.oracle.com</url>
            <layout>default</layout>
            <releases>
              <enabled>true</enabled>
            </releases>
          </repository>
        </repositories>
      </profile>
    </profiles>
  
  
    <!-- activeProfiles
   <activeProfiles>
      <activeProfile>oracleProfile</activeProfile>
    </activeProfiles>
  
  </settings>
  | List of profiles that are active for all builds.
  
  
  

  Get the following Exception all build a simple ADF 12.1.3 project. with mvn compile

  ....

  [DEBUG] use connector BasicRepositoryConnector with priority 0.0 to https://Maven.Oracle.com with username = myOTNEmail, password = *

  Download: https://Maven.Oracle.com/com/Oracle/ADF/library/BC4J-runtime/12.1.3-0-0/BC4J-runtime-12.1.3-0-0.Pom

  [WARNING] Could not apply that configuration for maven.oracle.com to the car org.sonatype.maven.wagon.AhcWagon$ __sisu1:could not find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

  org.codehaus.plexus.component.configurator.ComponentConfigurationException: cannot find 'basicAuthScope' in the class org.sonatype.maven.wagon.AhcWagon$ __sisu1

  at org.eclipse.sisu.plexus.CompositeBeanHelper.setProperty(CompositeBeanHelper.java:252)

  at org.codehaus.plexus.component.configurator.converters.composite.ObjectWithFieldsConverter.processConfiguration(ObjectWithFieldsConverter.java:101)

  to org.eclipse.aether.internal.transport.wagon.PlexusWagonConfigurator$ WagonComponentConfigurator.configureComponent (PlexusWagonConfigurator.java:102)

  at org.codehaus.plexus.component.configurator.AbstractComponentConfigurator.configureComponent(AbstractComponentConfigurator.java:43)

  
  

  See also

  https://JIRA.codehaus.org/browse/wagon-422

  What is interesting in this issue of CAR-422 is: affected Version 2.8 / Versions of difficulty: 2.8

  
  

  Any ideas? Very disappointing up here the 'Oracle Maven Experience '.

  
  

  BR
  

  Andreas
  

  Hello

  It sounds like a question that we should already have set by which the parent pom com.oracle.maven:oracle - common: 12.1.3 - 0 - artifact 0:pom has the extension of car-ahc Sonatype configured (we did our test in early retirement with this car).  I just looked at the https://www.oracle.com/content/secure/maven/content/com/oracle/maven/oracle-common/12.1.3-0-0/oracle-common-12.1.3-0-0.pom

  and have verified that the extension pulling in the wagon-ahc is not there.  I am very interested to understand what is pulling in an extension of the wagon-ahc and remove for you get the appropriate wagon-http wagon.  Feel free to contact me privately so that I can get more information from you.  My email address is robert patrick at oracle dot com dot

  Please note that FMW 12.1.3 out initially using Maven 3.0.5.  While most of the plugins works without using Maven 3.2.5, changes you might encounter problems with a few plugins because of the disruptive changes made in Maven 3.1.0 when they passed their implementation of Ether starting from Sonatype to eclipse (which broke a lot of existing Maven plugins).

  Thank you

  Robert

• IOS app do not compile in phonegap build after adding support for Push Notifications

  As the title says, I have an app for android and iOS using phonegap to build and push-plugin to the repository of the NPM. It worked perfectly for android, but for iOS, the events have not fired. Then I read that the AppID should have the active possibility of push notifications, so I added a development certificate and certificates and files of mobile provision changed.

  After that, the application is not compile more. I also added a certificate SSL Production to my App ID and certificate and files available mobile since I read the development of those who do not work with Phonegap, built on an old post, but that no longer works.

  Am I missing a step to make it work for the iOS with Phonegap Build? Thanks in advance

  Looks like commissioning your profile does not include your developer certificate. Try re-creating your provisioning profile.

  Maybe useful post:

  IOS create problem certificate does not match profile