Photo of tasks - help w / Configuration for W530

Similar Questions

• who can help me with "insufficient resources to meet the level of failover configured for vSphere HA.

  Hello world

  We tried to gif a 14GB of ram and make server complete a booking for her.
  This is a server for the exams and the vendor told us to do.

  I can't any more then 5500MB reservation on it, when I anymore that I get
  "Insufficient resources to meet the level of failover configured for vSphere HA.

  We have:

  2 X 5.1 ESXi hosts
  Each host has
  2 x processors (8 Cores each) with HT active.
  255,75 GB of Ram

  vSphere HA has been activated.
  Admission control policy is enabled and that the ability to failover is 1 host.

  What is the problem here?

  Thank you
  Ernst.

  
  

  Admission control policy is all about to give you the kind of guarantee that if the host failure happens then there will be enough resources to perform the successful failover.

  in simple terms, it comes to reserve the resources of failover.

  I would recommend going through the notion of vSphere HA, reduced control policy the following document.

  https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-60-availability-Guide.PDF

  From the Page number 22, the details that you need to study is given. Focus especially on part calculations Slot size of it.

  in your case you HA vSphere with number of failure of host to tolerate as admission control strategy defined.

  This means system will calculate CPU and memory slots out of the resources in your cluster, and the total number of units, it will keep some resources like reserved for failover, and others will be available to be used. It all depends on how much failure of hosts that you want to tolerate.

  now in your case, if you try to increase booking one of the virtual machine, which will then affect the number of locations in your environment, and so reserved ability to failover is violated, the system will not let you do what you want to do. As the energy on a virtual machine, or growing booking a powered VM etc..

  If you find that you have enough resources in your cluster and due to some virtual machines with very large cpu or memory reservation, number of places is less than you can still manage the settings some advanced in vSphere HA configuration, but I strongly recommend, try to take the help of someone who has done it before.

  also try to go through other admission control strategies which are explained in the document for more inputs.

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• No writable calendars are configured for invitations

  A few weeks ago I created the lightning (with the great help of the participants to the forum of TB) so that when I get an e-mail meeting invitations, I could accept, and they show up on my Google Calendar. A week ago, it stopped working.

  When I receive an invitation, there is no button to accept. Instead, there is a notice that says "no writable calendars are configured for invitations, check the properties of calendar.

  I made sure that Google calendar is present and selected in the tab of the Flash. I checked the calendar properties, and the email address where I receive invitations to meetings (my work email) is set as the e-mail address in the Properties dialog box. And the checkbox is enabled to turn on the calendar.

  Thanks in advance, does anyone have suggestions to get TB/Lightning to work as it did before? That is to be accepted invitations to meetings and automatically add them to my calendar?

  Thank you!

  Well, you can then mark your message as 'Solution' for the topic?
  Thank you.

• Configuration for the Extension of the airport by using ' 09 Extreme

  My Airport Extreme Base Station, model A1354, does not offer adequate coverage of my house. Instead of buying a Netgear N600 Extender, I bought an Airport Express, model A1382, to replace the base station with the intention of using the 1354 as expansion connected wireless station.  People at OKC Apple store assured me it is possible, but without knowing how. They said that I could depend on the support line Apple help me configure this system.  So... "' Help me please.

  (a) should what camera I use for the base station? The new device extreme Express or 2009?

  (b) should what steps I take to the rendering system a full-coverage protected WEP?

  (a) should what camera I use for the base station? The new device extreme Express or 2009?

  For your 'main' base station, one directly connected to the Internet by Ethernet modem, I suggest that you use your older AirPort Extreme Base Station, and then use the new Airport Express to extend.

  (b) should what steps I take to the rendering system a full-coverage protected WEP?

  WEP is an outdated wireless security method and has practically no value. Are you sure this is what you want or can go you with the safer: WPA2 for your Wi - Fi network?

• Deleted photos six months there are still appearing on my PC iCloud Photo downloads - even if they are not on my phone or iCloud photos online. Help, please

  Hello world

  I would really appreciate help with this.

  I took all my photos on my iPhone (iOS 9.2) 5s and put them on my computer. I also have pictures of iCloud connected to my computer. Anyway, I logged into my icloud.com account and there are no photos in my Photo Album at all. HOWEVER, when I click on iCloud Photos on my PC, it gives me the ability to upload 100 + photos. When I do that, it downloads a bunch of graphics photo I had on the phone for a few minutes back about six months ago, but then deleted immediately.

  I can't find any way to delete these photos. There is no evidence of them on my phone, my iCloud website account; only when I use iCloud Photos on my PC.

  Please help me with this, I really need to get rid of these photos.  I heard there was a bug with iOS 8 who saved the photos recently deleted even after that you had deleted them, but I can't find them anywhere. Now, too, there is no way to reset the iCloud photo stream.

  Any help would be great, thanks

  Hello

  I have the same problem!

  Re: 0 photos and 0 videos still 1.6 GB of Photos in iCloud.

• HP Pavilion p7-1240: desktop will be falling asleep and wake up, and then on its own since configuration for Windows 10

  Desktop has been configured for 10 Windows Home Premium and works very well.  However, a slight annoyance is whenever I put the machine to sleep, he wakes up in the minute each time.  So I do not use 'sleep' and turn every time that I'm done using it.

  However, I prefer to sleep until needed again.

  Already used administrator command prompt: powercfg /requests to check for power to the sleep problem issues and nothing appeared on the command line.

  Already tried disabling hybrid sleep - no help

  Already turned off all timers wake - no help

  Already changed the power of sleep settings using adapters - no network

  Any help you could give me would be much appreciated. !

  Hi there @Berndtoro,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the computer wake up sleep mode. I'll be happy to help you.

  You've done most of the things I want.  I see that you posted on the malware, which may be what wakes up the computer. Please follow the step of Troubleshooting sleep and hibernate issues (Windows 7).

  Please keep me informed of the progress of things. If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• PIXMA PRO 10 can not configure for WiFi

  Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

  MP68-victory-mg3200-1_02 - ejs.exe

  but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

  Hi, Jim!

  Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

  Thank you and have a great day!

• Computer is not configured for Microsoft FixIt. Why not?

  Original title: when I try to use the hotfix program it won't work and it did until I get a reprt error saying that my computer settings are not configured for microsoft fixit program

  I get an error reprt back saying that my computer settings are not configured for microsoft fixit program

  Hello

  ·         Who solve this running?

  ·         The problem occurs with all fix Microsoft?

  ·         Which exact issue are you facing with the computer?

  Some of the fixit tools are designed to work with specific operating system. If you try to run Windows 7 repair on Windows XP, it cannot run. Please provide us with more information about the issue so that we can help you further.

  If you are faced with the question with all Microsoft Fixit, you can post your query to Microsoft fix Center solution for better support.

  http://social.Microsoft.com/forums/en/fixitcenter/threads

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti

• Does anyone know if there is a way to define the layout of icons on the desktop when it is a 'bureau', then a different configuration for when it's a laptop?

  Original title: desktop themes?

  I use my cell phone as both a laptop and a "desktop"(connecter à un moniteur 24''). "»  Does anyone know if there is a way to define the layout of icons on the desktop when it is a 'bureau', then a different configuration for when it's a laptop?  I don't want to keep moving icons and I'm a little OCD about where they are.

  Hi MelissaES,

  You can follow these links & check if it helps.

  Set up multiple monitors

  Understanding multiple monitors

  Multiple monitors: frequently asked questions

  Hope the helps of information.
  Please post back and we do know.

• Internet configuration for windows media player

  When I try to play a song that I bought some time ago in WMP version 11 running on the operating system to Vista SP2, in the lower right corner, it says «Download rights of use...» "Then I get a pop up window that says:"Windows media player is not configured for the internet.

  "To connect to the internet, run the Internet Connection Wizard, and then try again"

  How can I find the Internet Connection Wizard? I am already connected to the internet DSL. I don't have the registry key to change the binary data, so I am lost on what to do.

  Thank you in advance for any help that anyone can give me.

  Steve

  Hi Steve915,

  Try the following steps.

  Step 1

  Disable firewall, you restart the computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Turn on the firewall and restart your computer.

  Step 2

  Run the internet connection wizard.

  1. Open internet Explorer > > options Internet Tools

  2 click on the connections tab, then click on the configuration tab.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.

• Cisco RV220W IPSec VPN problem Local configuration for any config mode

  Dear all,

  I need help, I am currently evaluating RV220W for VPN usage but I'm stuck with the config somehow, it seems that there is a problem with the Mode-Config?

  What needs to be changed or where is my fault?

  I have installed IPSec according to the RV220W Administrator's Guide. Client's Mac with Mac Cisco IPSec VPN, I also tried NCP Secure Client.

  I have 3 other sites where the config on my Mac works fine, but the Cisco VPN router is not.

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: remote for found identifier "remote.com" configuration

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: application received for the negotiation of the new phase 1: x.x.x.x [500]<=>2.206.0.67 [53056]

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: early aggressive mode.

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: RFC 3947

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: CISCO - UNITY

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: DPD

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: for 2.206.0.67 [53056], version selected NAT - T: RFC 39472013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: floating ports NAT - t with peer 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT - D payload is x.x.x.x [4500]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT - D payload does not match for 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT detected: Peer is behind a NAT device

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: request sending Xauth for 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: ISAKMP Security Association established for x.x.x.x [4500] - 2.206.0.67 [52149] with spi: 1369a43b6dda8a7d:fd874108e09e207e

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: type of the attribute "ISAKMP_CFG_REPLY" from 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: connection for the user "Testuser".

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: type of the attribute "ISAKMP_CFG_REQUEST" from 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: ignored attribute 5

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: attribute ignored 28678

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: attribute ignored 28683

  2013-03-07 01:56:07: [CiscoFirewall] [IKE] INFO: purged-with proto_id = ISAKMP and spi = 1369a43b6dda8a7d:fd874108e09e207e ISAKMP Security Association.

  2013-03-07 01:56:08: [CiscoFirewall] [IKE] INFO: ISAKMP Security Association deleted for x.x.x.x [4500] - 2.206.0.67 [52149] with spi: 1369a43b6dda8a7d:fd874108e09e207e

  Hi Mike, the built-in client for MAC does not work with the RV220W. The reason is, the MAC IPSec client is the same as the Cisco VPN 5.x client.

  The reason that this is important is that the 5.x client work that on certain small business products include the SRP500 and SA500 series.

  I would recommend that you search by using a client VPN as Greenbow or IPSecuritas.

  -Tom
  Please mark replied messages useful