Similar Questions

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Coloration of the code for the PHP files using CSS

  Coloration of the code for the PHP files using CSS
  

  The Situation:

  It is possible to mix PHP and CSS so that you create a PHP file and it is served to the user in a CSS file. It works just like writing a normal PHP file which is then processed and used in HTML. To do this, you create a PHP file and at the top of the file, you add the following line of code:

  <?php header("Content-type: text/css"); ?>

  This line tells the browser that the file is CSS instead of HTML. Fantastic.

  Here is a link to a more detailed article on the subject: http://www.barelyfitz.com/projects/csscolor/

  The problem:

  The problem is that when I create a PHP file in Dreamweaver code colors in the document like PHP for PHP and HTML to CSS code code because it still thinks the document is supposed to be a HTML document. Is there a way to change the style of this situation? I find that code coloring to normal CSS files is really useful and would like to be there instead of just black text.

  Other information:
  

  I already have this submitted a feature request to Adobe, but I never heard back. Does anyone know how to do this now?

  I would really like to see the code coloring to adapt to the content type of the file, when the file is PHP. So if no content type is specified, values by default in html format, but when it's CSS, code coloring so a coloration of the different code is used. It could also adapt to files JS, XML files, the works. But really, I just want to add the PHP/CSS code coloring.

  I'm certainly not an expert, and this is my first time looking at the file,

  but it looks like the section.

  "ID ="CSS"doctypes ="CSS"priority '50' = > ' see the style css and

  the and refer to where the design must

  be applied. If that is correct then the code you provided should style

  It all starts after the

  and ending with another php code? It should be then that a

  tag additional php to be present in the document of 'close' the

  blowdry.

  And the continuation of this line of thinking, I have just that in the (php-> css)

  file. I placed my code. Then

  After the CSS, I placed another block of php: and it works!

  The CSS is styling just like should the CSS.

  Logically, you need that, and it seems to work ok for me without it. If Yes, you can change "" to be more explicit and less impact for PHP parsing, such as ' /DW/ '.

  Haha, Unfortunantely, PHP is more the same color scheme. He

  went from normal red blends what the html code looks like

  scheme (blue with quotations from green text). Fortunantely this configuration is far

  more convenient than the previous color coding!

  All subsequent PHP Directives are coloring properly for me - it's just the first one that triggers the coloration (e.g. ) is not. What do you see?

  If, therefore, in the XML file you added in CodeColoring.xml, you can change:

  scheme = "outerTag.

  is similar to the colouring of the PHP Directive:

  scheme = "customText" id = "CodeColor_PHPScriptBlock".

  This causes the entire PHP directive is red color - not optimal, but a little better.

  HTH,

  Randy

• I try to add an image map for the first time using Dreamweaver CC

  I am trying to add an image map for the first time using Dreamweaver CC in an html site.

  I can get map controls is displayed when I select the image in the code, and I can select the rectangle tool.

  However, when I try to select the area of the image disappears from the section of the map of the properties viewer and I can't select the area for my hyperlink.

  What I am I missing videos online are it seems so simple, but something with my page is not allowing me to withdraw this.

  This is the code section and the image that I'm trying to add the link.

  < side class = "sidebar" >

  < img src = "images/flowchart.jpg" alt ="product dev. Flowchart">

  < / side >

  Please help or give me any advice... There might be something to do with the fact that my site is "sensitive"?

  Hello

  You could just add links to each box, but a better solution would be to use svg for this. Unfortunately, it is easier for me to write for someone who does not know svg to do.

  If you have Adobe Illustrator create your svg using this program, then it would be a case to add links manually to each box created in the svg code. SVG is an xml-based language and not a real image, even if this is how a browser will display the it.

  PZ

• Impossible to retrieve the password for the user FUSION_APPS_WSM_APPID using ldapsearch

  Dear all,

  I'm unable to retrieve the password for the user FUSION_APPS_WSM_APPID using the ldapsearch command

  Is the correct command extract the password for the user FUSION_APPS_WSM_APPID below?

  $ORACLE_HOME/bin/ldapsearch - h < hostname > Pei 3060 d 'cn = sleep '' w < password > base b s 'orclCSFKey = basic.credentials, cn = oracle.wsm.security, cn = CredentialStore, cn is FusionDomain, cn = JPSContext, cn is FAPolicies' objectclass = * orclcsfname orclcsfpassword

  Kindly help me in this problem.

  Kind regards

  Vinayak K

  Can you clarify why you need recover the password? Application identities are designed for internal processing and never to be exposed outdoors or used for other purposes only lift access to the code in some scenarios within the system. So only the administrator must have access to the account and the password of access they would reset it in the store of credentials if necessary. That said I think that the admin can retrieve the password using the command listCred wlst something like:

  listCred(map="oracle.wsm.security",key="FUSION_APPS_WSM_APPID-KEY")

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• for the first time using the do not know how to insert video to start editing

  for the first time using the do not know how to insert video to start editing

  First thing you need to know is that After Effects is not a video editor. First is to put some shots together to tell stories (that is changing), After Effects for creating those shots (compositing and Visual effects) and to create animated graphics.

  To use AE, start here: starting After Effects

• How to associate the data store of the target for the newly created using the API Interface

  How to create a new Interface under project, need to associate the data store target for mappings for the interface by using APIs "."
  
  Able to get the associated interface created temporary data store. You need to associate a new database model. How to do this using the API
  
  My code is,
  
  String pCode = "DEVELOPMENT";
  Context OdiContext = (mgr.getFinder (OdiContext.class)) .findByCode (pCode) (IOdiContextFinder);
  System.out.println (Context.getLastDate ());
  
  OdiInterface pInterface = new OdiInterface ("toDeleted_Interface", pFolder, context);
  pFolder.addInterface (pInterface);
  
  The list of ds < DataSet > = pInterface.getDataSets ();
  < DataSet > iterator itr = ds.iterator ();
  DataSet ds_nxt = itr.next ();
  
  PAlias string = "HRA_TMPL_DEFNS_TL";
  pOrder int = 0;
  OdiModel pModel = (mgr.getFinder (OdiModel.class)) .findByCode ("FILE_PM_MODEL") (IOdiModelFinder);
  String pName = "HRA_TMPL_DEFNS_TL";
  OdiDataStore pUnderlyingOdiDataStore = new OdiDataStore (pModel, pName);
  SourceDataStore pSourceDataStore = new SourceDataStore (ds_nxt, false, pAlias, pOrder, pUnderlyingOdiDataStore);
  ds_nxt.addSourceDataStore (pSourceDataStore);
  
  TargetDataStore tdata = pInterface.getTargetDataStore ();
  
  If (tdata.isTemporaryDataStore ())
  {
  }

  http://odiexperts.com/creating-interface-for-single-source-and-target/
  http://odiexperts.com/creating-temporary-interface-using-ODI-SDK/

• Extra charge for the installation and use of the Creative Suite programs on the cloud?

  Sorry to ask a question apparently REAL dumbell!

  Are there extra charges over-and-above the monthly fee of $49.99 for the installation and use of the Creative Suite programs on the cloud?

  The annual subscription of $49,99 sounds too good to be true. I saw that a recent price list where each individual progeam was $49.99? -Thanks for your help, IM

  Intallation and download Support is free for creative cloud.

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• Is there a better application of configuration of the airport as the Airport utility?

  Utility of the AP does not have options for what he used.  Is there a configuration utility more professional which can be used with the latest AP Extreme, Express and Time Capsule?  For example, the AP utility won't let me configure my extreme from AP to "connect to a network.  The only options are "Create a wireless network", 'Extend a wireless network' and 'Off '.  It WON'T let me set up my Airport Express like that, but I would also do that with my AP extreme, since it is only six feet from the main Internet access (Time Capsule).  I don't really need two transmitters as close to each other and I cannot use Ethernet in this case.

  This is just one example.  If for no other reason, I would like to see what other settings are available with the hardware.  Y at - it a more complete installation utility?

  Y at - it a more complete installation utility?

  Sorry, but no.  More than 3 years ago, Apple has removed 20 + useful features and options of AirPort Utility.

  If you still have an old Mac running Leopard (10.5.x) or Snow Leopard (10.6.x), you might be able to use it to look for options of 'missing '.  A PC with the AirPort 5.6.1 for Windows utility may work as well.