photo without click event

Similar Questions

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• Click event incorrectly attached after DOM manipulation

  I have a page with elements of entry and a span element style as a button. Register event handlers changes on input elements, to make the validation when the input values are changed. If the entries are not valid, I add the content of a div on the page to indicate the problem. I also save a click event handler on the span of style as a button.

  When I change an entry and then immediately click the duration (i.e. without leaving the input element before clicking on the duration of the update), I see:

  (1) mousedown on the duration
  2) switch to entry
  (3) mouseup on the entry

  This happens only when I change the DOM in the event handler changes on the entry. If I do not change the DOM then I see:

  (1) mousedown on the duration
  2) switch to entry
  (3) mouseup on the duration
  4) click on the duration

  In the first case, I see the mouseup attached to the input rather than the span element element, even if it has the same coordinates as the mousedown attached to the span element. Given the coordinates are within the span element and outside limits of the input element, I don't understand why mouseup is associated with the element of entry rather than the span element.

  There is an example of this at http://jsfiddle.net/4zx8rm7c/.

  I see this behavior in Chrome and Firefox 34.0.5 39.0.2171.95 m.

  If the association of the mouseup event with the input element, despite the apparently independent of the mouse event, behavior plan, coordinates I need to understand why that is. I looked at characteristics of COM event level-2 (briefly) and I don't see an obvious explanation.

  This forum is intended for the user support, not for issues related to web development.
  Try announcement Web development / standards evangelism MozillaZine forum. The contributors there are better informed on the problems of development of web page with Firefox.
  http://forums.mozillazine.org/viewforum.php?f=25
  You will need to register and log in to post in this forum.

• Errors in 'Speed' while accessing the mouse click events?

  Hello

  I built a software where it has a CVI callback function registered on the Panel. The function tests whether two cases, the first EVENT_LEFT_CLICK and then EVENT_LEFT_CLICK_UP. The user is supposed to keep the click button for some time (~ 1 second), and there is no problem. However, I have found that if by mistake (that users commit often) multiple rapid clicks are made, sometimes the click down the piece of event (EVENT_LEFT_CLICK) of the code is not read. I reduced the likelihood of this problem of the speed setting of double click (on Windows) to the maximum.

  I think that if I could eliminate the double click event, this problem would be resolved almost completely and only limited by the speed at which the processor can update mouse events.

  Hope you understand my problem.

  Thank you!!

  AUTOSOLVED.

  Thanks to a guy who posted his own solution on a Windows forum, to 'disable' the double click. Just change the HKEY_CURRENT registry value > ControlPanel > mouse > DoubleClickSpeed to 1. What makes the double click speed so fast that you can access virtually every user actually simple clicks.

  After doing this, in order to apply the registry editing, I ended explorer.exe running and he raised through windows task screen. However, change, this applies to what I opened the mouse Panel (without change or apply anything from there).

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• not pulling - click event button position: fixed - 2.0 Playbook

  I have a fixed position "back" button in my application that triggers not when scrolling to the bottom of the screen.

  Here is the code for the button:

  Back
  
  

  When I scroll the screen to the top, the button triggers without problem. However, if the screen scrolls down at all, the button's click event will not occur.

  I've traced the events Web Inspector and a click event fires when I click the button. However, it does not actually draw the method that I've linked to the click event of the button. Once again, if I scroll the screen to the top, the button click fires very well.

  I must emphasize that the button is displayed correctly at all times. He remains in a fixed position of 5px to the right side of the screen, even when scrolling of the window down. If the button is visible at any time. It's just that when I scroll nothing happens if I click on the button.

  Looks like a bug with WebWorks. If anyone can confirm?

  Thank you

  Thanks for the suggestion ignites.

  I found that this was due to my own bug. It was a problem with z-index. I increased the z-index of the button, and it solved the problem. The button must have been in conflict with lowest elements of the page, but it was very well at the top of the page.

  Thank you

• Insertion of several subforms instances with app.response on the click event.

  I could use help untangle this click event. I can't make it work the way I need too. I tried a few different variations without success. The part I have a problem with is in the loop and inserting multiple copies based on the user input to the app.response event. I have a script version that works with no loop, but who will not allow the insertion of multiple instances of the subform feature. Would appreciate any help on how I can do this.

  var cChoice = app.popUpMenu ("Add a blank section", "Copy this section", "-", "Delete this section");

  If (cChoice == 'Add a blank section') {}

  ACT.instanceManager.addInstance (1)

  } Else if (cChoice == "Delete this section") {}

  ACT.instanceManager.removeInstance (this.parent.instanceIndex)

  } Else if (cChoice == "Copy this section") {}

  var cResponse = app.response ("the number of instances of the section you want to insert?", ["copy current section"])

  }

  If (cResponse is nothing)

  {

  App.Alert ("no copy of this section was inserted because of a response zero.");

  }

  on the other

  {

  var i = ACT.instanceIndex

  var j = 0

  while(j<cResponse) do

  {

  _ACT.addInstance (1)

  xfa.resolveNode ("form1. Subform1.Act ["+ (i + 1) +"]. . RawValue row1. TextField") = xfa.resolveNode (" form1.. ") RawValue Subform1.Act.row1.TextField")

  Hello

  You code got a little truncated, but maybe something like;

  var cChoice = app.popUpMenu ("Add a blank section", "Copy this section", "-", "Delete this section");

  If (cChoice is "Add a blank section")

  {

  ACT.instanceManager.addInstance (1)

  }

  on the other

  If (cChoice is "Delete this section")

  {

  ACT.instanceManager.removeInstance (this.parent.instanceIndex)

  }

  Else if (cChoice == "Copy this section")

  {

  var cResponse = app.response ("the number of instances of the section you want to insert?", ["copy current section"])

  If (cResponse is nothing)

  {

  App.Alert ("no copy of this section was inserted because of a response zero.");

  }

  on the other

  {

  var i = ACT.instanceIndex

  var j = 0

  While (j<>

  {

  Var _ACT.addInstance = Act (1)

  Act. Row1.TextField.RawValue = xfa.resolveNode ("form1..") RawValue Subform1.Act.row1.TextField")

  j ++ ;

  }

  }

  }

• How can I get the catalogue to recognize missing photos without doing them one by one?

  I've sorted in a collection without realizing many of the images are "missing photo". When I find the originals catalog is not automatically find that all the other missing persons photos around her as she normally does.

  There is that just too many missing photos do this one at a time, and I don't want to lose that way, that I created in the folder of the collection.

  How can I get the catalogue to recognize missing photos without doing it one by one?

  Navigate to the folder tree in the library module. Records must indicate that they are absent. Right-click on a folder and update the location of the folder. It will also work for all subfolders.

• Must click the button twice to run the code in the Click event.

  I have a button that has the following code to the click event.
  _SubFormS.setInstances (0);

  Last week, I added the code on the Exit of the next button event.
  xfa.host.setFocus (Subf.ButtonRemove);

  For some reason, I have to click twice for instance 0 value. It's never happened before. If I comment the code on the same output, nothing changes. Ideas of this weird behavior.

  Thank you.

  Hey, 1996

  It seems to me that you have a setfocus soomehwere which is always of the substitution of the click event. For example, if you have a field that does not check if (xfa.event.commitKey == 3) before that setFocus is called, it doesn't matter what other field (or button) you click on, you will be sent to the field specified by the setFocus. 'Double click' isn't a double click, it's a click that is substituted by a setFocus (which sends you somewhere else) then a second click which is not interrupted by a setfocus, which means you can click on the button.

  I don't think I have explained myself well, so here, step by step what I think is happening:

  -You are currently in an area that doesn't have that a setFocus without checking the commitKey.

  -You click on the button.

  -Due to the setFocus, you are sent to another field that does not have the button. This means that the button never fires the click event. the second field that you are sent to has the good commitKey checks.

  -You click on the new button,

  -This time, because the new field that you are in control of the good commitKey, you are not sent to another discipline, and succeeded to your click.

  I hope it did a good job of explaining my guess as to what is happening. Check all your output events to ensure that they all use the If (xfa.event.commitKey == 3) then bit. having forgotten one would explain why that happen all the time... it only occurs when you try to click on the button while you're in the field wihtout the cheque of commitKey.

  Let me know if this is useful,

  -Scott

• The CLICK event management

  Hello

  by clicking on the search icon, a search bar will be visible (ON)

  If the user clicks any where on the scene, the search bar will be NO visible (OFF) OR user, click the ICON again the search bar will be OFF

  but this point CLICK fires without clicking

  searchIcon.addEventListener(MouseEvent.CLICK, showSearch);
  
  var srchBox:Boolean = true;
  
  function showSearch(event:MouseEvent):void
  {
       if(srchBox)
       {
            srch.visible = true;
            stage.addEventListener(MouseEvent.CLICK, offSearch);
            srchBox = false;
       }
       else{
            
            srch.visible = false;
            srchBox = true;
            stage.removeEventListener(MouseEvent.CLICK, offSearch);
            
       }
       
       
       
  }
  
  function offSearch(event:MouseEvent):void
  {
       
       srch.visible = false;
       stage.removeEventListener(MouseEvent.CLICK, offSearch);
  }
  

  staged as I click the ICON, icon triggered and search bar > OFF

  :

  searchIcon.addEventListener(MouseEvent.CLICK, showSearch);
  
  var srchBox:Boolean = true;
  
  function showSearch(event:MouseEvent):void{     if(srchBox)     {          srch.visible = true;          stage.addEventListener(MouseEvent.CLICK, offSearch);          srchBox = false;     }     else{
  
  event.stopPropagation();          srch.visible = false;
            srchBox = true;
            stage.removeEventListener(MouseEvent.CLICK, offSearch);
  
       }
  
  }
  
  function offSearch(event:MouseEvent):void
  {
  
       srch.visible = false;
       stage.removeEventListener(MouseEvent.CLICK, offSearch);
  }
  
  

• When you reopen tab, how to make me able to type in the bar of address directly without clicking on it? --(sujet: réinitialisation de la configuration et le module ne fonctionne pas)

  Hi all

  Need help on the new tab on Mozilla.

  I want to be able to type directly into the address bar every time I open a new tab in Mozilla, without clicking anything whatsoever. To be more clear, this means that whenever I open the new tab, the blinking cursor is already on the address bar.

  What is happening now is everytime I open a new tab, the cursor is placed anywhere - not on the search bar on the page, and not on the address bar. I should put the cursor somewhere to do something.

  I tried to use the subject: reset config (1) and the custom installation new tab (2), but the two do not work.
  When I tried the subject: config reset the reset button has not been highlighted (I assume that means it is by default), and the new custom tab doesn't give a different result.

  What confused me, it's 2 days ago, my Mozilla works fine. Whenever I open a new tab, the blinking cursor is in the address bar and I was able to type directly.

  I thank you and appreciate the help!

  Note:
  (1) about: config reset:
  -Enter about: config in the address bar and press ENTER.
  -To avoid the warning, press the big button "I'll be careful, I promise!
  -In the search box, paste browser.newtab.url
  -In the search results, click browser.newtab.url, and then click Reset.

  (2) add custom reset:
  -Install Custom new tab = https://addons.mozilla.org/firefox/addon/custom-new-tab/
  -Open modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  -Side of new custom tab, click the Options button.
  -Set any page you want to open in each new tab (topic: newtab is the value default; about: home is the default home page) and make sure that "Focus in the URL bar" is not checked.

  Dear philipp and cor - el,

  Thank you very much for your help! I've erased all the installation of Firefox and did several restarts, now, the problem goes away (even if I still don't know what the problem of the root).
  Thanks again for the quick help.

• I opened MY Facebook id and I get my photos of friends from my mistake I don't know who im key press + photos going to hide how I is new im trying to come back, but I never see still photos im click on the image, but im can not show me

  I opened MY Facebook id and I get my photos of friends from my mistake I don't know who im key press + photos going to hide how I is new im trying to come back, but I never see still photos im click on the image, but im can not show me

  This has happened

  Don't know how many times

  is 2 days befor

  It is possible that you clicked the 'Block Images' item in the context menu by attempting to save an image.
  Check the image exceptions: Tools > Options > content: Load Images: Exceptions - see the web content, pop-ups, fonts and language settings

  A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  Go to the tab Media of this "Page Info" window.
  Select the first image and scroll though the list with the arrow pointing downwards.
  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  See also the problems that cause to not show images and http://kb.mozillazine.org/Images_or_animations_do_not_load

• By the way a multicolumn Listbox double-click event line in a secondary

  What I have is a shell at a higher level with the configuration of equipment of high level, as well as common application functions as save the test report and exit/close.

  In this first level is a listbox multicolumn "Test selection".

  When a device is selected in the configuration, one of the many sub-panels charge based on the selected device.  When the secondary is loaded, the table of test selection on the front of the top is filled with items via a reference.  The listbox items differ according to high school who is responsible.

  Normally what we do is use a structure of the event with the event double-click to change States in the program.  Given that States I want to change are in the secondary, and the list box lies in the toplevel, I can't use the event structure to integrate this double click on the secondary line.

  What I want to do currently a property to read to the 'value' of this list box in the secondary in both cases the timeout of a structure of the event or within a parallel loop, then to the decision of the State based on the changing value of the indicator.  However, by doing this I lose the effect "queues" in the table of test selection (can double-click some line items and the structure of the event will be queued double click events).

  Is there a more elegant way to spend this line double-clicked in the secondary?

  It seems that you already pass a reference to the Listbox MC control to the Subvi.  You can use it to record dynamically for the double click event inside the Subvi.

  

• Double-click event

  Hello

  How to get the double click event. (ex if I click table colume double time as only triger event.)

  Hello

  pls refer this link...

  http://digital.NI.com/public.nsf/allkb/391D522B0FDD4B3F862571E300739F44

• performance without clicking the button run

  Hello

  I am new in programming with Labview.

  I want to design a system which, since the input variables change, the output must change without click on run to start.

  Thank you

  Insert your code in a while loop.  Add a wait function so that the loop does not consume all available CPU resources.

  Watch tutorials online to help to start with LabVIEW.

  Lynn