Photos - a validation test!

Similar Questions

• How to make a schema validation test

  Hello friends,
  
  I want to do the validation test on the schema (that we loaded data from the file system to the ORACLE TABLES).
  
  You need to get the number of records in each table of a schema.
  
  Appreciate your help.
  
  Thank you/Kumar

  >
  I want to do the validation test on the schema (that we loaded data from the file system to the ORACLE TABLES).

  You need to get the number of records in each table of a schema.
  >
  It seems that the validation test must be carried out on the people who wrote the loading process.

  Why your loading process does not recount the number of records loaded? SQL * loader reports this information.

• Grouping of NETWORK - validation test cards

  I was hoping to get a validation test on a configuration that I propose.  Networking is my area the lowest so please be nice.  Here's the scenario.

  Two 6509 with four cards of 48 ports (10 GB trunk between switches)

  DL380 servers with two quad port NIC

  Two vSwitches with 4 uplinks by vSwitch (two ports per quad port NIC)

  Here is the actual surface, I'm hoping to get confirmation.  I would like to connect two uplinks to a 6509 on different maps and the other two other 6509 on different maps.  I do this for redundancy and BANDWIDTH.  The idea is that I'd be able to lose a 6509 and still be in business.

  I'm not interested in debating the merits on # vSwitches or number of uplinks.  I hope just to get clarification on the splitting of the uplinks vSwitch between separate physical switches.

  Thanks in advance,

  Alan

  Yes you can - because the redundancy is your primary goal, you can configure grouping vSwitch in the vSwitch in a role of active / standby classica where a port is active and othe laugh standby - if you want to both ports of uplink to be active, you will need to set up the NIC teaming policy on the vSwitch Port card based since the law of physical switches independently and you want VM out of a port traffic uplink single at the time because you can't spon Etherchannel through two switches-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Validation tests

  Is there a validation for original Dell windows xp installation which does not pass the test now?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Field validation tests

  Hi all

  I'm currently testing a telephone number for the validation field. I configured the validation settings, but I want to use exit the event to focus on the field if the entry does not. As you can see you can enter an invalid phone number and it pops up the error and then move to the next field.  I want to return to the Center.  This is the code I tried but I can not find the list of properties anywhere.  Can someone point me to the appropriate reference?

  What goods using the system sets to true or false as part of validation so that I could use (this.mysterypropertyIdontknow)

  In the example below, I made the property 'validated' to illustrate my point.

  Thanks in advance,

  Tony.

  event out of JavaScript:

  If (!) () xfa.host.setFocus (this.somExpression) This.Validated));

  Place a text field on the form.

  Validate the model: text 9999999999 {}

  Edit pattern: text {9999999999}

  View model: text {'('999') 999-9999}

  Copy the code to the below change event
  restrict entry to the numbers
  If (xfa.event.change.match(/[0-9]/) == null)
  XFA. Event.change = "";

  Copy the code to the Exit event below
  If (this.rawValue! = null & this.rawValue! = "") {}
  If (!) ((This.TST))) {}
  If the Validate event not executed, this.tst value happens as undefined, then force them to run the validate event
  If (this.) TST == undefined) {}
  this.execEvent ("validate");
  }
  else {}
  xfa.host.setFocus (this.somExpression);
  }
  }
  }

  Copy the code to validate the events below

  var strPhoneNumber = "" + this.rawValue;
  If (strPhoneNumber! = "" |) strPhoneNumber! = null) {}
  this.formatMessage = ' Please enter a valid phone number! "
  This.TST = false;
  }
  on the other
  This.TST = true;
  This.TST | Boolean (this.execEvent ("Exit"));
  }

  Thank you

  Srini

• Failed Validation Test Suite

  I'm usign ADL Test Suite 1.3.3 to validate a SCORM 2004 Captivate generated PIF and after 20 seconds (the default for reception LMSInitialize delay) I get "ERROR: Initialize() never invoked" while the wrapper correctly launch the swf file.
  I also tried to intercept a call of function Captivate1_DOFSCommand and seems that it is never used.
  My test platform is:
  -Windows XP SP1
  -ADL Test Suite 1.3.3
  -JRE 1.5 Update 2
  
  Any suggestions anyone?
  Thanks in advance!
  Marco

  Andrew,
  First of all thanks for your offer to help me but yesterday morning I played with a few options for publishing and I found to forget, as good as I am, to check the metadata include Breeze (which seems caused not call the LMS functions) and the options of the object in the manifest that was causing an error during the validation of the metadata.

  Visit this forum for my next problem!
  Marco

• T440 memory validation test

  Lenovo will come out tomorrow to repair a T440 unit with bad memory (many BSODS, omitting most of the tests.) expanded memory, etc.

  The representative on the phone seemed a little unsure of the configuration of the memory on these laptops. My understanding is that the 4 GB of RAM, our units have is soldered directly on the system board as a DIMM on the unit is not used.

  It is safe to assume that the procedure is to replace the motherboard? The representative initially wanted to send us a 4 GB SODIMM, but I don't think that would do any good.

  No complaints about the rep, he was very friendly, I want to just make sure we are setup so that everything is resolved tomorrow.

  Thank you!

  A SODIMM is welded and this one is not.

  To determine which one is faulty, remove the removable SODIMM, and then rerun the tests of memory. If she passes the test, then the removable SODIMM is defective, in which case the defective SODIMM should be replaced.

  If you do not pass the test, then the motherboard should be replaced.

• Validation test...

  We need to determine how many advanced capabilities of a sale to another step within a given period. Thus, for example, my logic will test to see how many opportunities became '10% ' during a specified period of time. I used the box sales stage history analytics. Then I put a filter on 'Historic step of sales' = '10% '. Finally, under the "Start Date"scene, I chose one of the combinations nice date (month/year) to invite users to report.
  
  This seems to be a reasonable approach?
  
  It seems to me reasonable results, but it would be very difficult to verify that the results are correct before the creators of real opportunity for this polling data.
  
  Thank you community!
  
  Mike

  Your approach is correct. Do not forget that if the opportunity will move multiple steps on the same day he only will present the last step and not earlier. There is a system problem. Owners will not be able to skip the steps of sale so I wish people On-Demand would bring in the feature model of the State which is available in CRM on premise

• Photo not valid error when launching an application

  Hello

  When launching an application through the web browser, I get this weird error.

  Starts the RDP session, the profile starts to connect, and as username and group political stuff ends, I get a little popup with the title 'Quest vWorkspace Shell' and "invalid image" message.  At the bottom of the screen is a pnshell.cmd minimized command prompt that is sitting there until I click OK in the popup mentioned previously.  Once I click OK, then the vWorkspace application will launch successfully.

  The pnshell.cmd has the following inside:

  REM added by RMC to prevent permissions app sprinkled with admins

  c:\Windows\syswow64\Ifmember administrators

  If not ErrorLevel 1 Goto SkipAdmins

  c:\Windows\SysWOW64\pnshell.exe

  I'm on vWorkspace v8.0

  The RDSH is 2008 R2

  Any ideas why I get this error?

  Thank you!

  Nick.

  Hello Terry,

  Thanks for the reply.  We use Sophos, but I added the file C:\Windows\SysWOW64\pnshell.exe to the list anyway, restarted the TS, and it's always as problem.  I also added pnstart.exe to the list too.

  I noticed now that this happens only to a specific user.  Other users seem to be the problem... So... don't know why, but I hope it's a?  If you have any ideas why I would be eager to hear.

  Thank you

  Nick.

• CRM validation test.

  function setup() {}
  Xrm.Page.getAttribute('xx_date').addOnChange
  (
  function () {}
  Xrm.Page.getControl('xx_date').setDisabled (true);
  If (Xrm.Page.ui.getFormType () == 1) {}
  Xrm.Page.getControl('xx_date').setDisabled (false);
  }
  }
  );
  Xrm.Page.getAttribute('xx_date').fireOnChange ();
  }

  If I call, "setup();" on Form Load...

  What is this plant someone different computer, when you try to debug, once that it blocks IE9 when you try to change the date, or is it just me?

  Hello

  The question you posted would be better suited in the MSDN forums.
  http://social.msdn.Microsoft.com/forums/en-us/categories

• Filter/rendering/lighting worked perfectly Saturday. Sunday, it was "grey". (CC Photoshop on the Mac.) (The photo that I tested Sunday was the same).

  Filter/rendering/lighting worked perfectly Saturday. Sunday, it was "grey". Photoshop CC (Mac). The picture was the same both times.

  Hi ebbailona,

  Greetings.

  • Make sure that the image is 8 bits/channel image
    • Open PS and then open the file on which you want to work, click on the Image - Mode - 8 bits
  • Also open Preferences - performance - advanced - settings of fashion design and select Advanced. (graphics processor use must be verified)
  • Also, make sure that your PS is up-to-date.

  Concerning

  Rohit

• dvSwitch validation test

  I'm exposing a dvSwitch for a wider environment, and I'm worried about run Max ports.

  At the moment the vCenter has approximately 50 guests.  The dvSwitch will 15 groups of different ports.

  I understand if I keep the default of 128 ports per port group, I ran in a Max.  port 128 x 15 groups is 1920.  Then 1920 x 50 guests = 96000.

  Is my math correct, or a port only get used when a virtual machine is actually activated and registered with vCenter?

  Also is there a reason why would need a group of ports for vMotion, or network management more than 8 ports?  If it is a port by type of traiffc, if you have your vMotion on its own vmkernel, then only one port for each host would use?

  Clarification would be great.  Thanks for your help

  I understand if I keep the default of 128 ports per port group, I ran in a Max.  port 128 x 15 groups is 1920.  Then 1920 x 50 guests = 96000.

  Is my math correct, or a port only get used when a virtual machine is actually activated and registered with vCenter?

  No... If you set the port group to have 128 ports, it is not yet multiplied against the number of hosts. Guests consume ports from this pool.

  You can check this by creating a VDS and add hosts, then looking at the "Summary" tab and "ports".

  Also is there a reason why would need a group of ports for vMotion, or network management more than 8 ports?  If it is a port by type of traiffc, if you have your vMotion on its own vmkernel, then only one port for each host would use?

  The port group will require a port by vmkernel for each host. Keep in mind that prior to 5.1 VDS ports are static and not elastic. You may need to up the value of the port count if other ports are required.

  With a VDS 5.1, ports are elastic and will automatically switch to a higher amount when demand increases.

• Validation test for the relationship between network_name, services and relaxation

  11g R2 running on RHEL 5 U4
  Primary (NO CARS) with a physical Standby (NO CARS)
  I'm trying to set up a basic configuration so that the client can ONLY connect to the primary database.
  
  Here's what I think it should all look like
  
  -entry on the primary and Standby physical tnsnames
  DMS =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = PRIMAIRE1)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = STBY_DR01)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = DG_DMS)
  )
  )
  
  -the service created on the primary
  exec DBMS_SERVICE. () CREATE_SERVICE
  network_name = > "DMS",.
  service_name = > 'DG_DMS '.
  );
  
  -the service created on the primary
  CREATE OR REPLACE TRIGGER manage_service after starting on the database
  DECLARE
  role varchar (30);
  BEGIN
  SELECT DATABASE_ROLE IN the role OF V$ DATABASE;
  IF role = "PRIMARY" THEN
  DBMS_SERVICE. START_SERVICE ('DG_DMS');
  END IF;
  END;
  
  
  Sounds good?
  If this is not the case, can you please explain how to set up.

  Yes, if you plan to have a service being started on your physical waiting while it is in standby mode, you don't need to create the service with DBMS_SERVICE previously. CREATE_SERVICE. When the waiting becomes the main, Oracle Restart starts the appropriate services as defined by you using the command "srvctl add service d DMSPRMY s DG_DMS-l primary SCHOOL.

  If you need a container of service started on a standby physical while it is in standby mode, then you would have still to do the creation on the primary service so that the service is available on the day before.

  But in both cases you don't have to create the trigger.

  Larry

• Quick test of validation when using 3D paintings

  Community of greetings OR.

  I do a quick validation test to see if I'm on the right page when you use arrays 3D (see document attached for more details of table).

  I coded the Word document in LabVIEW (VI attached), and I have 2 sets of embedded for loops for each transformation - one to perform the transformation and the other to back to see if I get the same result.

  So for example, if I feed in table 3D ABC, the first set of loops for it change to LAC, and the second set must change it restores on ABC to see if you did it right.

  Well, the first series is ok. But when I try and turn into a cabin and BCA and check my work passing it backwards, it does not return correctly.

  I checked it over and over again and ran through the tutorials.

  Any help? If I do something wrong, can someone let me know what it is? I would like to learn!

  Thank you!
  TheLT

  
  

• slide show does not play in photo.only shows first photo

  Just upgraded to El Capitan.

  When I select an Album for a slide show, only the first frame appears, with the title of the album. I tried all variants of projections, but nothing works!

  I tried all variants of projections, but nothing works!

  What exactly have you tried already?

  A slideshow play project properly, if you select the photos in the album, use the command "file > new slide show?

  The problem occurs only in your existing photo library or in any library of Photos? To test with a different see the library of Photos of this help page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6d60b524

  Create a photo library

  • If the photo is open, choose Photos > Photos of quit smoking.
  • Hold down the Option key and double click on the Photos icon in the Applications folder (or click on the pictures of the Dock icon) to open the pictures.
  • In the select Library dialog box, click on create new.
  • Type a library name and choose a location to store the library.
  • Click OK.

  Switch between any libraries

  • If the photo is open, choose Photos > Photos of quit smoking.
  • Hold down the Option key and double click on the Photos icon in the Applications folder (or click on the pictures of the Dock icon) to open the pictures.
  • In the select Library dialog box, do one of the following:
  • Click the library that you want to use, then click on choose a library.
  • If the library you want does not appear in the select Library dialog box, click other library, navigate to the location of the library, select it, then click on choose a library.

  Is your photo library a library iCloud, or photos stored locally on your Mac?

  If slideshows do play not only in your existing photo library, but well play in a differnet photo library, try to repair the library as described here: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6be18f93

  Important: You must back up your library before repair of your library.

  • If the photo is open, choose Photos > Photos of quit smoking.
  • Press Option-command and double-click on the Photos icon in the Applications folder (or click the Photos icon in the Dock). The library of repair window opens.
  • Click on fix to rebuild your library.