MY 10 WINDOWS STOPPED WORKING, GOT DRIVE C FORMATTED AND INSTALLED WINDOWS 7. NOW SYSTEM RESTORED IMAGE, WANT TO TRY HARD WITH ALL THE OPTIONS BUT FAILED

Similar Questions

• How can I stop FF from previous session restore, I've played with all the options I can find, but nothing can stop it unless I have clear history every time.

  Recently, FF started to open my tabs when I start a new session. I already checked to make sure that none of the parameters are enabled, such as the options-> general: housing starts of FF when "SHOW MY HOMEPAGE" is selected. But for some reason, it opens my last session. The only way I could so he could stop to do this is to have it delete my browsing history after that I closed the session. I don't want since I often use my story to re - find the information I need to research class. I made sure all my settings are the same since before FF has begun to do that. He has only started to do after the computer was turned off for a long weekend.

  I already looked in the help pages for Mozilla and all I can find is the restoration of the previous or similar session. I can't restore my previous session, I want to stop the restoration of my previous session without having to delete my browsing history each time.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  You can also try resetting Firefox:

  • https://support.Mozilla.org/KB/basic+troubleshooting

• I can't install the update on my IPad version to watch TV. I tried all the options, but did not work

  How can I install an updated Version of the flash drive on my IPad?

  Hello

  FlashPlayer is not supported on iOS devices. Be it iPhone or iPad.

  Please post a request in the forum from apple.

  -Vivek

• Frequent blue screens, load error popups, no more access to the Windows Firewall or system restore.

  ORIGINAL TITLE: Many many problems at once.

  I get frequent crashes and Blue Screen of Death, and error loading of pop-up windows, so I can't access Windows Firewall or system restore. What happens here? I deleted the last hardware (a second printer) and a P2P program.  I ran AVG antiviris and Superantispyware programs several times, same mode without failure, but nothing have mounted there. I also have a report of error that Windows Firewall / Internet Connection Sharing Service cannot start due to a missing path.  Which maybe can be causing all these problems? I think of reformatting my hard drive, but it's a last resort.

  I could not run the system restore, even in safe mode. Last good known Configuration did not work, either. However, clean boot seems to have done the trick. I no longer get the popups on start up and I can access firewall Windows, which is now on. Oddly enough, my EVG and Superantispyware programs wouldn't let me download the latest updates. Since they are free programs, they offer very little help to solve problems, so I uninstalled both of them (at the same time as Windows Defender to avoid conflicts) and installed Windows Security Essentials which works very well. My last problem is one is the crash suddenly, but to be honest I him have not lived since the clean boot. Hoping that...

  Thank you very much for your help. I was almost to the point of reformatting my hard drive, this is not a walk in the Park, no matter what they say.

  Daniel Shouse

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• InstallShield engine stopped working while I was trying to install SQL2000

  while I was trying to install MS SQL2000 on my laptop, I got this msg saying engine installshield stopped working.what can I do?

  I don't know THAT SQL Server 2000 is compatible with Vista, as the latest service pack for her it was in 2005.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=Microsoft%20SQL%20Server%202000&v=Microsoft&UID=8&PF=2&pi=5&s=SQL%20server&OS=32-bit

  You can try to use compatibility mode to run the http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows installation program

  Is there a reason that you need to install this version of SQL Server? Newer versions are available on TechNet

  1. http://TechNet.Microsoft.com/en-GB/SQLServer/bb671408
  2. http://TechNet.Microsoft.com/en-GB/SQLServer/bb972143

  Your question may receive better answers to the MSDN and TechNet Forums.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  Hi RobertKlaas,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth

  Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth then reinstald google earth without crome

  Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth then reinstald google earth without crome

  Restore explorer.exe...

  Right-click on an open space of the taskbar > Task Manager > Procesess tab, right-click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > Ok

  Is back to normal desktop icons/shortcuts?

• format and install windows xp without cd rom drive

  I want to format my laptop and install windows xp but I have not cd player rom. someone can tell me how to format and install without using a cd rom?

  Hi x zero90.

  I answered your post located in the link below. Please respond to this post.

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/647034ad-1ffa-4031-9b16-0696fcb29bc9

  Thank you!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• System Restore op after failure of HARD drive and replacement

  Hello

  I have an old laptop dv9000 with XPPro factory installed SP2, since upgraded to SP3. The hard drive failed (Seagate 80Gig). I checked with the test of the bios Setup, he said "fail" and I checked by booting from the windows installation disc CD player. He said, not found hard drive. SO, I bought a disc bytes of more 1 t (same mfr Seagate, same 5400 RPM) and installed. I have a backup network (Seagate Black armor) drive and I was able to restore the last backup. The booted cd drive the recovery disc for this program, the hard drive light blinking and it seemed to be something for 3 hours, then told it was full.

  But the new drive does not start. I've read on this forum and of the joint recommendation was to use the system provided with the laptop recovery disks. I dug through the boxes in the garage and have found the system recovery discs and my 14 cd makes system restore. :-) makes to keep unwanted sometimes. But I tried the system recovery disk and it will not start in the cd player. I get a white screen with the cursor in the left flashing top. I went back to try the recovery of Seagate disk, and now it will not start either. I tried to remove the new HARD drive. with or without a cd in the player it displays the message "No Op sysytem found." SO I think that something touched the CDdrive. But it is interesting with the blinking cursor will restart the machine, then perhaps a part of the op system is loaded.

  It is an old machine, the old system of the op. I shopped Hp store and only Windows8 available now. SO I am forced either on the cutting edge with all new bugs and learning curve, or I'm trying to get this old lady will machine. Other things I've linked, hard reset, restore the default bios.

  Ideas that you may have will be appreciated.

  Hello

  The laptop is back running with the new hard drive, Yay! and a new cd player.

  Here's what he had to, for anyone who has ever has the same problem:

  The CD player was bad. The nearest local supplier on the list for assistance parts hp gave me was a suitable replacement. I installed, and the system restore disc started and ran immediately.  I decided to check and see if the windows install disc would go and restore the sytem since I thought that I had already restored the entire C: partition. He started, but did not find the hard drive. He gave an eror message that does no drive found.  I went to the hp system restore disc and running. It took several hours reformatted the drive (by removing everything I'd put) and rebooted several times. Eventually, he came with a windows desktop computer. This is the factory installed there are over 5 years old. I installed the Seagate backup software and running. He seemed to have more options running in windows he did directly from the boot cd. One of the options was to restore the MBR. I had to find out what it was, Master Boot Record. I thought that it should be restored. The full restoration of the backup process C: took another few hours, but he finished and gave a message of the operation successfully.

  Then I rebooted and got windows, connected and got my office logon screen as it was at the time of the backup. Success.

  In the future, I'll watch that restore MBR, maybe it's there, and I missed it the first time. I have a slight nagging worry that maybe something else caused both drives to fail almost at the same time. But I'm not going to fuss with it. I hope that the machine works well for a little longer.

  Thanks to those who have tried to help.

  Later,.

  Dyno

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Audio is OK until the PP CS5.5.2 is open to all the other audio fails and PP works

  This could be an Nvidia, Windows 7 64 bit, Matrox MX02, Premiere Pro CS5.5, ASUS P5E Deluxe problem or a bit of everything.

  
  

  
  

  When I start the system, audio system, CDs and mp3 files work.

  
  

  When a launch of first Pro CS5.5.2 audio works replaying in PP and the system of files as mp3s continue to play.

  
  

  When I close Windows Media Player and re - open the audio only one that works is the PPCS5.5.2

  
  

  This only happens after that PP is open.

  
  

  When I reboot everything is back to normal, until the PP is open.

  
  

  All the other audio fails, sound system, CD and mp3 files

  
  

  The audio is routed to the Matrox MX02 with 5.5.1 drivers not the SoundMax card on ASUS P5E deluxe with the latest drivers and BIOS.

  
  

  This is consistent. I have not a clue as to what is at the origin of the problem. Matrox is studying the MX02.

  I use the driver with a GeForce GTX 560 Ti 280.26

  
  

  Any help will be appreciated

  Technical support Martrox

  We have been able to reproduce the problem and reported your steps in our Engineering Department.

  We will discuss the updates as soon as we have not.

  Preferences

  Audio output mapping on: Premiere Pro WDM Sound.

  The audio material value: Premiere Pro WDM Sound

  The ASIO value: speakers (Matrox WDM audio device THE)

  Reader: Reader of Matrox

  Table of mixing Windows - speakers (Matrox WDM audio device THE)

  Remote control audio/speakers/panel Matrox WDM set as default

  ASUS P5E Deluxe

  Driver RealTek SoundMAx 6.10.2.6585 latest driver for W7 64-bit

  MX02 audio driver 5.5.1.44

  the properties of the sequence:

  Sequence 01

  1920 x 1080

  00-03; 11; 02, 29.97 FPS

  48000 Hz - Stereo

  I've loaded a different sequence and changed Matrox settings accordingly. The problem remains the same.

  Sequence 01

  720 x 486

  00; 00; 00; 00, 29.97 FPS

  48000 Hz - Stereo

  1080 p 29.97

  Matrox AVI CODEC

  Type: MPEG Movie

  File size: 623,1 MB

  Image size: 1920 x 1080

  Frame rate: 29.97

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:02:23:21

  Average: 4.3 MB/second

  Pixel format: 1.0

  Video shot on pixels Sony PMW EX1 Square Native 1920 x 1080 MP4 imported by PP CS5.5.2

  NVIDEA GeForce GTX 560 Ti

  driver 8.17.12.8026

  Latest updates of W7 installed

• Firefox 4.0 than flash menus as a key on the keyboard is pressed. Can not access even with all the plugins turned off. Same issue on multiple machines with different versions of Windows. How this can be solved?

  FF 4.0. Flash menus such as a key is maintain pressed making it inaccessible. The problem persists with all the plugin disabled. Firefox box top left appears. The old logo FF show instead.

  Fact to uncheck use hardware acceleration helps in the Firefox menu > options then in the window of Options - Advanced tab > uncheck the box 'use hardware acceleration when available' stop the problem does not happen.

  Advanced panel - accessibility, navigation, network, updates, and other advanced settings in Firefox

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft