Photos available on a second monitor all current edition?

Similar Questions

• Unable to second monitor installation

  Original title - display settings are not saved

  I just bought a second monitor.  I want this monitor as an extension of my primary monitor.  When I go to display settings and try to attach the second monitor, check extend the desktop to this monitor and apply, it always comes back to 1 monitor, default settings.  How can I save the new settings?

  Did you install appropriate drivers for the new monitor - if this isn't the case, please get it from the manufacturer of the monitor and install them (even if you've used versions on the disc that came with the monitor, updates that can solve this problem may be available).  The second monitor work at all in any configuration dual monitor?  The second monitor actually works at all - did you see images and screens on this subject?  Are you sure that the second monitor is compatible with the video card, it is attached (some integrated video cards and even additional cards do not have a lot of power and unable to properly run a screen wide and high resolution - and may not work at all or may work only partially or sporadically problems).  I try right here dismiss the possibility that there may be a material, the connection or compatibility issue before moving on to software problems.

  See the following article: http://windows.microsoft.com/en-us/windows-vista/Understanding-multiple-monitors.  If this doesn't resolve the problem, then wait the right for links to see also articles and check as well (and they can also lead to even more).  In the end, you should be able to access all items from Microsoft on setting up, troubleshooting and configuration of two monitors in Vista.  Hopefullly an article will identify you missed a step or point out exactly where is the problem. I suspect that the system is not properly configured to use two monitors and that is why you are having this problem.  I don't think that he "s it does not save the settings (if this can be a symptom) as much as it is that the system doesn't fully recognize it is in dual screen mode - although I don't know why because I don't know what you've done to put in place.

  Here's a simple article on how to setup two monitors-, but I suspect it is perhaps too simplistic to this situation (although it may report a fundamental issue that must be treated):http://www.ehow.com/how_5960696_setup-windows-vista-desktop-computers.html.

  Here is another article on setting up two monitors in Vista: http://www.instructables.com/id/How-to-setup-dual-monitors-with-Microsoft-Vista/.  Note You must press the next button to move from page to page, as it is spread over several pages.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All sources of funds available for this desktop computer are currently busy

  We do a pilot project on several thin clients. The problem is that we have 7 devices Windows Embeded WYSE, they work wonderfully. But we also 3 thin OS devices from WYSE V10L. When a user is already connected to a desktop computer and they're trying to connect to a client device light they receive an error "all sources of funds available for this desktop computer are currently busy. This only the first time happnes, they hit enter while the desktop is unplugged. If they hit enter once again that they are able to connect directly. My question is there a way to solve this problem, the user is never a mistake or if it can wait one second for the disconnection or something. Any help would be appreciated.

  Thank you

  Tom Bryan

  Yes, it would be at the level of the customer. That allows them to reset everything.

  And thanks for letting me know the individual Office thing too. If you can switch on desktop clone linked at some point it would make maintenance much easier as well!

  Mike

• Pavilion all-in-one 23: Add the second monitor to HP Pavilion CTO all-in-One-23-p110z

  As it is configured, the factory is the "HP Pavilion all-in-one-23-p110z CTO" capable of supporting a second monitor?  I see NO obvious "video inputs" ports.

  Thank you!

  Hi @beckinista,

  Thank you for being an active member of the HP's Support Forums.   I understand that you would like to know if you can connect a second computer monitor 23-p110z all-in-One CTO Pavilion.

  The specifications of the motherboard of your computer show that there not a secondary display port. I have included HP Pavilion 23 - p110z all-in-one CTO Office product specifications and configurable Options and HP and Compaq Desktop PCs - specifications of the motherboard, Boa for your reference.

  I hope the above helps.

• Connect a second monitor to the all-in-one desire

  Please forgive my ignorance on this subject in advance.

  I just bought a HP Envy all-in-One.  Model 23o014; Product F3E94AA #ABA.  I am running Windows 8.1.   I'm very happy with my purchase so far.

  I also bought an AOC E2470Sw monitor and want to connect it as a second monitor to the all-in-One.

  AOC monitor has a VGA (?-15-pin) connection), but also has two HDMI inputs.  I THOUGHT (with the agreement of my distracted salesman) that I could connect the two with a HDMI connector on both machines, but I get a blank on the AOC screen when I try.

  What I am doing wrong?

  Thank you

  Sally

  Hello...

  The HDMI connector on the base is an entry, not an output. For a second monitor, you will need to go with a USB to video card.

• ENVY Beats All - In - One Desktop: how to connect a second monitor/TV to HP ENVY Beats all-in-One

  Hi, I was wondering if anyone could tell me if it is even possible to plug a second monitor HP ENVY Beats all-in-one desktop PC, because I'm trying to connect my TV as a second monitor via HDMI, and I tried everything I could, but came empty-handed?

  Hello

  What is the product/model of your AIO machine? I have a lot of cases, you cannot use HDMI port to connect to a TV, because it's the HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).

  Kind regards.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• HP Pavilion 23-q055na: connect a second monitor to an HP Pavilion 23-q055na all-in-one

  Hello

  I just bought a new HP Pavilion 23-q055na printer all in one and wonder if it is possible to connect a second monitor. It has an HDMI output, but my second monitor had a DVI connection (DVI - D single link).

  It doesn't seem to be DVI to HDMI converters for sale online, but I don't want to lose my money if it's not going to work.

  Anyone has any advice on the best way to connect a second monitor to this PC?

  Thank you

  Ali

  Hi there @Haikugirl

  The best choice for you would be a screen that supports a HDMI input you don't need to work with an adapter, at all.  However, there are adapters on the market due to the fact that many adapters are often necessary, and I used the flavors varied in many different situations with great success. In general, I would do some research on the specific device and the brand and are looking for comments before you plan to buy an adapter.

  It can never be guaranteed that any device will work in all cases, but if you find a device from a renowned manufacturer, then chances are strongly in your favor.

  I would like to begin by ensuring that the DVI input on the monitor works well, before considering an adapter. If it is intermittent in some way, then it is probably not your best choice.

  Just my two cents. I hope it helps.

• How can I get Windows Photo Viewer (7) to play his slide show on the second monitor?

  I attach a second monitor to my laptop with an RGB cable.  I would like to be able to play the slide show and screen saver of photo on my extra monitor instead of on the little tiny screen on the laptop.  Is there a way of photo windows 7 Configuration Viewer to do?

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, you are not able to play slide on the second monitor photo viewer. I'll be happy to help you on this question.

  I suggest you try the steps from the following link on how to move the windows or the programs between the different monitors.

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

• Automatically discovers the current image on the second monitor

  Hello

  Is there a way to get the behavior obtained with on photoshop lightroom, when you always want to preview full size on a second monitor?

  I like to do my work on the cintiq, but it is obviously not as good as my color monitor calibrated. Currently, I am having to perform a 'new window' for each thing, that I'm working and manually moving the calibrated monitor. Is there something out there that automates this process?

  Lightroom has it and it works fine.

  Photoshop a bit with his camera overview - but that sends the image to an iPad.

  Any other ideas other than my manual way?

  Thank you!

  Andres

  Use the Navigator (set to nearly full height) Panel on your second monitor. The browser panel is part of the workspace and remains in place.

• How the photos to have a glimpse into a second monitor on bridge CC?

  This question must have been asked here before, but I couldn't find the answer. Sorry if this is a matter of repeating...

  How the photos to have a glimpse into a second monitor on bridge CC? It is more difficult to find the answer that I expected to be.

  Thank you.

  Windows 7, i7, Nvidia Quadro 4000

  Expand the window and drag it across to the second monitor.

• How to connect a second monitor to my HP Pavilion TouchSmart 20 - f394 all-in-One desktop computer

  I would like a second monitor with this pc

  Figured it out myself... it is not a video connection on this PC... Need a VGA - USB adapter. $60 Best Buy

• 27 - n102a: can I use All In One as a second monitor?

  Hello!

  I have a couple of laptops and would like to know if I can use my HP 27 - n102a as a second monitor for them. One is an HP revolve 810 and the other is an Asus, well that do not know if it matters.

  My HP turn seems to have a DisplayPort and my Asus has a mini HDMI port.

  Thank you!

  Hello

  No, the following link shows its specifications:

  http://support.HP.com/SG-en/document/c04869600

  It has the HDMI port on the back

  Figure: SunstreakerT back i/o ports

• How can I preview my photo on the second monitor fullscreen? I mean I want to live broadcast the result without saving the file

  I want to see the result of my editing on the second monitor for broadcasting

  Click on the new window to make it active and go view > screen mode > full screen or press the f button a couple of times.

  [EDIT]  CTRL 0 will make the zoom image to fit the screen.  CTRL Alt 0 will make the image zoom to actual pixels size.  Note that these are zeros, not the letter O.

• Suggestion menu doesn't show is not on the second monitor. Firefox 29.0.1

  After the upgrade to version 29.0.1, I see in the drop-down menus suggestion on my second monitor.

  The menus show that only a small line black.

  This seems to happen on my secondary monitor on all the fields in the search bar, websites and connections.

  The menus still function, I can move through values with the arrow keys.

  I am Windows 8.1, Intel HD Graphics 3000.

  The main monitor works well.

  Here are some examples
  https://onedrive.live.com/redir?RESID=8F2CDA5FB6A9D21A! 913 & authkey =! ADamCtDU2Tbe2ok & v = 3 & ithint=photo%2c.jpg

  This could be a bug.

  Could test you with the use of Firefox hardware acceleration disabled? There are two ways to do:

  (1) temporarily to run Firefox in Safe Mode
  
  (2) turn off in normal mode of Firefox.

  # 1 :

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Your tabs and non-private windows must be restored (unless you have configured to not save a history of Firefox).

  Any difference?

  (To return to the normal mode, exit Firefox and restart normally.)

  # 2 :

  "3-bar" menu button (or tools) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after leaving and you launch Firefox, next time.