27 - n102a: can I use All In One as a second monitor?
Hello!
I have a couple of laptops and would like to know if I can use my HP 27 - n102a as a second monitor for them. One is an HP revolve 810 and the other is an Asus, well that do not know if it matters.
My HP turn seems to have a DisplayPort and my Asus has a mini HDMI port.
Thank you!
Hello
No, the following link shows its specifications:
http://support.HP.com/SG-en/document/c04869600
It has the HDMI port on the back
Tags: HP Desktops
Similar Questions
-
can I use all in one series printer series to efax instead of fax data modem?
Hello
Can I use 'everything in a series' printers (printer, scanner, copier and Fax) to receive faxes in my Inbox? i.e. efax, otherwise let me know on the hardware that is used to receive faxes in computer science.You can get an Efax service but it's not free.
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
I have a HP2430 with a plate of broken scan. I would like to continue to use it as a printer. I can't stop the cycle of quality control which continues to try to scan a test page?
Hi Kennt,
You are looking for in your printer, it doesn't have an option to bypass the alignment process, which means that it will continue to ask, you can scan the alignment page. If the alignment message appears on the computer through the software, you can see if it will let you to cancel it, but if not you will not be able to bypass alignment. You can check your user guide as well, but at this point, I'd call the HP Technical Support in your area and inquire about trade in the program for your printer.
I hope you have a nice day!
-
is Acer Liquid Z320 smart phone really unlocked and can be used all over the world?
is Acer Liquid Z320 smart phone really unlocked and can be used all over the world?
NETWORK
Technology GSM / HSPA 2G-banding GSM 850 / 900 / 1800 / 1900 - SIM 1 and SIM 2 (model dual-SIM only) 3G bands HSDPA Speed 42.2/5.76 Mbps HSPA GPRS Yes EDGE Yes http://www.GSMArena.com/acer_liquid_z320-7531.php
These are the tapes supported Z320, if as long as it is unlocked, you mean the possibility to use different carriers in the world, that Yes it is.
at least if your don't buy it with a specific transport contract.
-
Can I use all 500 GB on a hard drive, I have install windows 7 and it only uses I think 466 around this amount, why is - this
Hello Edtannjr,
Thank you for your message. Remember that the operating system itself takes place and many OEM systems contains a recovery partition which can take up to a space as well.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Bought Adobe CC today. More apps for how I can use outside of photoshop, illustrator and indesign. Can I use all of the applications listed in the membership fees charged per month? Or will be charged extra?
Cloud Plans https://creative.adobe.com/plans
- and conditions for subscription http://www.adobe.com/misc/subscription_terms.html
-what is in the whole cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-
can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?
You know, it's just a thought. I'm not sure that the differences between the iq526 and iq770, but as I was looking around I found this article. I don't know if it'll help, but you might want to take a look. Obviously someone understood how to use the HP touchsmart as an external monitor for his Dell laptop.
-
When bi-ecrans is used, and Firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.
I have the same problem and I got rid of it by disabling hardware acceleration of rendering in the settings dialogue. Now I see the Firefox menu properly on a secondary monitor.
-
I lost connectivity for printing service about a week ago. Maybe it's me trying to add an older HP Cad printer plotter to my selection of printers. So, based on the recommendations of HP:
1. I uninstalled all drivers of HP and my pc software (all-in-one)
2. He unplugged printer HP
3 - reloaded HP drivers and software on the site of HP (all-in-one).
4 - connected to the printer.
I did several times. Together with network using ethernet cable connections as well as direct USB cable to the printer.
Results:
1. I can't print all the al. either through the ethernet connection or via a direct usb cable.
2 - However, I can scan, fax via the software on my PC HP solution Center
3 - the printer itself is fine because I can print using the other PCs on my home network.
So, I tried everthing I can think. There are configuration, etc. think I cannt understand that my PC keeps me from printing. Help, please.
Hi flyfish08,
Thank you for your answer!
Uninstall the software. Uninstalling the printer software.
If you are using a USB connection. Unplug the printer USB cable.
Clean boot the computer. How to perform a boot in Windows.
Disable all Antivirus programs. Disable Antivirus software.
Disable all firewall programs. The WF of end-to-end.
Create a new user account. Management of user accounts and connections (Windows 10).
Connect to the new user account.
Reinstall using full feature software and drivers. (Wait for the software to tell you to plug in the USB printer cable).
Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I hope that these measures will help!
-
Can I use more than one flash drive to ready boost on Satellite L650/0ed
Hello
I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.
In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".
Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.
Thank you
-Brent907Hi mate
Please check this Microsoft page that describes the ReadyBosst
http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoostThere, you can find this statement:
+ ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +I hope this can be useful!
-
Using Lenovo C540 all-in-one as a second screen
I recently bought two computers, a laptop Asus desktop Lenovo C540 all-in-One touchscreen, Windows 8 and Windows touch, 8.
The issue I'm facing is to attempt to use the Lenovo as the 2nd screen to the laptop. Is this possible with an all-in-one device since it is not a stand-alone monitor? If so, how would I go on this subject?
I tried just to plug in an HDMI cable between the two and go in the options screen 2, but which have resulted in nothing.
Hi Bushy808,
Welcome to the Community Forums of Lenovo!
I checked the C540 details and the HDMI on the back is only for HDMI output
The unit is has a HDMI to display an external device on its screen.
Best regards
Solid Cruver
-
Can I use more than one USB-6008 in the same program?
I'm working on a project that may require up to six modules USB-6008. Before I buy more I need to know if I can use all six at once in the same Lab View program. Can anyone help?
Hello Nick,
LabVIEW is capable of handel that the number of data acquisition tasks quite easily, but you have to remember that USB has a maximum bandwidth. Therefore, you have to make sure you have enough on your PC USB hubs. In general there are between two to four USB slots by hub and each of them will have a maximum flow rate which will be divided between all devices connected to this hub. So even if you can get four USB DAQ devices attached to four USB ports if they are on the same hub, you might notice significantly reduced rates of data transfer. I would say rather than buying six or more USB 6008, why not buy a PCI card that is able to handel a lot more entries with greater bandwidth.
-
Smartphones blackBerry gel and can not use all the apps
Ive got a blackberry touch 9800, I had to reset to factory settings last night because all my disappered apps he did this after playing a few hours but now holds everything, it is the gel Ive took out the battery and left for an hour, now I can't use anything either about this at all can only text can make calls not recive them freezes the app facebook app world, bbm does not anyone can help or I won't have to send so they can watch? any help would be brill thanks xxx
Looks like something is corrupt, as wipe you it I loaded the OS to a newer version if possible.
Manual device OS upgrade instructions:
1. start by searching for your operator and the system operating file that you want to use.
http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp
2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6
6 remove the internet connection for PC and reboot the PC.
7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.
8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339
Take advantage of the new operating system.
-
Recently, I upgraded my system in San Francisco Helvetica font, but I can't use the San Francisco Police Department in one of the Adobe Creative Suite applications (IE Photoshop, Illustrator, etc.). Is it possible for me to use in these applications? If this is not the case, how can I get a copy I can use the Creative Suite?
So... Update: week last Apple released version beta of the San Francisco police to iOS9 and developers of El Capitan: Fonts - Apple Developer
Only available for download from the composition of the Apple Developer ($ 99 / year)- BUT the download link is unavailable today (San Francisco policies |) Apple Developer Forum)
Once they fix the download and it ends up working with Adobe applications, I will let you know!
-
Can I use my activation code on the second computer?
Can I temporarily use my activation code on the second computer?
Our Organization (Texas Health and Human Services Commission) is moving to a new operating system (Windows 7 64-bit). I am responsible trial Adobe eLearning Suite 6.1 on a computer with the new operating system installed.
I have the disk installation but a step course how do I actually get the suite to work on another computer.
Thank you
John Kovach
Developer of educational resources
Facilities support services
Texas Health and Human Services Commission
Hi jckovach,
Please see the Ko: n_Can_I_use_my_software_on_two_computers_ http://helpx.adobe.com/x-productkb/policy-pricing/end-user-license-agreements-faq.html#mai .
Kind regards
Romit Sinha
Maybe you are looking for
-
Hello Anyone know the best way to back up photos and videos I took Iphone 6 my mom. I just got a new Iphone 6 more and have an icloud account, she has one more. I don't know how to proceed. Thank you
-
There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?
-
Any attempt to access Microsoft Update leads to "Internet Explorer Cannot Display the Webpage"
No error message appears. "Analyze the network connection" does not work.I have XP with SP3, IE7, automatic updates on, no firewall other than Windows, all other work on Web sites, including updates for antivirus (Avira Antivirus personal), I've dele
-
Mine is a new 8320. I installed the Desktop with Media Manager software. Seems the 8320 on the CD Office and the online version does not include Media Manager so I installed v 4.2 Service Pack 2, which includes the Media Manager. Now cannot transfe
-
My Microsoft wireless mouse has a button triangler on the back of it (behind the roller). What is this button?