photos turn when importing

Similar Questions

• Improve when importing photos

  In the opening that you used to be able to apply-auto-enhance photos like they were imported.  This has saved be a job having to do it later.  I am also pleased with the results of her auto-améliorer in 99% of situations.  I have now taken pictures but I don't see a similar option on import - no one knows if it is available?  Also and if not possible when importing - y at - it a suite of choice a lot of pictures and then applying the setting to improve in bulk?

  Thanks in advance.

  There is no automatic to apply when importing adjustment.

  And you can't batch apply adjustment either. It is limited compared to the opening.

  What you can do, however, is to adjust a photo you like.  Then copy ⇧⌘C and paste this setting for a different picture with ⇧⌘V

  You must be in edit mode to be able to copy and paste adjustments.  But you can use the arrow keys to advance to the next photo, without leaving edit mode.

  And you can send a feature request to Apple: Apple - Photos - comments

• Windows live photos freezes when I try to import photos

  Windows live photos freezes when I try to import photos from a directory on my removable disk. In fact, it freezes every time I try to do anything.

  I tried to do it with PICASA and it does the same thing.

  However, when I open it in safe mode, it works fine.

  Help, please.

  Hi zl1940,

  (1) if it works well before?

  (2) remember to make changes?

  I suggest you try the following steps:

  Method 1: You can run the fixit available in the article below

  Windows Live Photo Gallery freezes or cannot start

  Cannot download albums in Windows Live Photo Gallery after upgrade from Windows Vista to Windows 7

  
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: Clean boot the computer, and check to see if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, please repost your query on the Forum Windows Live

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to select the photos I want to import in the import Windows 7 Wizard, and how to change their name to a group of the name custom when importing?

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  ===========================================
  Perhaps the following links will propose a few ideas:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
  (don't forget to extend "Import in the view settings" at the bottom of the page)

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  You might find the free Picasa software or Windows Live Photo Gallery
  to be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Picasa
  http://Picasa.Google.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Some JPEG photos will be not displayed when importing in Lightroom

  Hi, I had a catalog for all my iPhone photos, they are near 26 000 photos. When I made an update of file synchronization, it has removed from photos jpeg as 5% of them.

  I can open the missing photos of the Explorer, but I am unable to see them in my LR catalog, or bring in my catalog.

  I even tried to create a new catalog, and then import it here, but it always fails to display in the catalog to import.

  missing photos have no trend that I could identify. they are in JPEG format. If I make a copy of the photo file that will be displayed in the import dialog box. But the problem is that I have tons of missing photos.

  What can I do?

  my version of lightroom is 2015.6.1 on a windows 10 machine

  Found the problem!

  I've identified the images like the ones here where live photo, and according to the markets forums I just check the option "treat jpeg next to raw as separate photos files.

  Really appreciated your prompt response.

  Thank you

• Mode Lr library my records show the correct number of photos, but when I select the folder it show "is selected any phot" as if the foder is empty. This happens on most of the files not all. I then import from my C drive and all is well for a while, then

  All records of the library of Lr see all of the photos but when I click on a folder I get 'no photo selected. I import all of my photos and all is well for a short period then the images seem to disappear again. This happens in most cases, but not all. Any help please?

  Hi colini,.

  Suggest you to reset preferences in Lightroom and then, check out: given to zero (or "Trashing") the Lightroom preference file. Lightroom Forums

  Kind regards

  Claes

• LR5: time offset when importing photos - why?

  Import my pictures from the camera with storage in folders by date. Now, I've discovered that photos taken before midnight are stored in the folder for the next day.

  After a review, I found that the time displayed when you move the pictures in the import dialog are always displayed with an offset of + 2:00 for the real time (such as described in the camera) when the photo was taken. So all photos taken after 22:00 are stored in the folder for the next day.

  My conclusion is that LR obviously takes the offset from the UTC time zone (in my case: THIS summer, which is UTC + 2) when importing photos. I remember having that first saw on travel in New Zealand last year when import photos on my PC that I had put to the local time zone on a trip, so this shift was 12 hours.

  When viewing the photos later in the module library or development, the time is displayed correctly, so obviously drawn "like what" EXIF/XMP.

  Is this a known issue? I could not find a place in the LR settings to control this behavior.

  It is a very old bug, which has never been set. The simple solution is to import from a card reader, not a camera directly connected. The insect bites only during the import of the camera.

  Image capture metadata must be perfectly OK, so no need to change anything here, it is only the name of the folder that is affected by the bug.

• Photos turn incorrectly when loading in the widget gallery

  It's weird and I can't understand why - but photos turn all different ways when loading in a widget to the gallery.  Some are upside down or sideways, for example.  I opened all preview images before loading, and they are all right to the top as it should.  I can rotate the thumbnails individually but it will take forever, and that still leaves the lightbox images at full size in their State of incorrect rotation.

  I'm doing something wrong?  Is there something I can do to fix this or prevent it from happening?  I want to emphasize that it is only THE images, not all.  No real rhyme or reason as far as I can tell.

  Thank you!

  This happens often with photos of smartphone or table, if the device is held "incorrect" (= from left to right, right to left).

  Just try to re-save the images with an imaging software. There are applications that enable to reset the indicator of orientation within the image file.

• When you import photos into LR4, import feature does not all photos in the folder

  I have a catalog with all the imported pictures from a trip I just got back from.  But when I compare the catalog for real photos in the folder, there are 104 missing photos from the catalogue.  If I try to sync the catalog, it says 104 photos must be imported, but the import process said that there are no new photos.

  I created a new catalog and tried to import the file again, but its lack still the same images of 104.

  I don't know what to do here.  Help, please.

  There are only three reasons that I see which files are not imported:

  1. the issue of Raw + Jpeg, you already have reduced.

  2 not supported file types. So is there anything on these 104 images that are unusual in a perspective of file type? What kind of file, what device, what version of LR4 (4.0 or 4.1).

  3. already imported file. Seems more likely that you said that you "they remind of where everything what he. Have you tried to identify one of the 104 files and then find in Lightroom (use the text search option in the library filter bar).

• LR 4 and 4.1 can't create new folder manually when importing photos

  Windows 64, i7, 12 GB of RAM

  I don't seem able to create a new folder manually when importing photos.  It still works fine on the same PC with LR3.6.  Anyone else seeing this?  Thank you.

  

  Yes, I'm on Win7. I can get the result that you specify.  I right click on the folder name in LR and then choose "Create a new folder."  This shows the dialog box windows.  If I then right-click in the right pane and select new > folder, I get a new folder empty in the right pane and can type the name, then select this folder.  If, instead of click with the right button in the right pane, I try to type the name of the new folder in the bottom of the dialog box where it says "file:" then I get this error message. That's what I mean by saying that the process has changed slightly in the LR4.

• LR 2.3 freezes when importing from CF card reader photos

  We use LR for some time.  Repeatedly noticed when import a few hundred new photos than LR 2.3 will freeze for importing photos from a CF card reader (Lexar Professional Player and Lexar CF cards).  The computer must be rebooted which causes corruption catalogue and had to start all over again. I use an iMac (3.06 GHz Intel processor dual core) with 4GBs of RAM and 800 GB HARD drive.  All the operating system software are uptodate.  I was wondering if others have the same problem and what, if any, work arounds could be out there.  Adobe does not have this problem on their Web site.

  Image capture is an application that ships with Mac OS X. It can be used to control what happens during a reconnaissance of the card, but it is not necessary. I have my Mac configured to simply use Finder to copy maps, if for some reason, I use LR.

  I think that once you reformat your card, you may find LR will very well be important.

• Avoid duplicated when importing photos

  How do you keep Windows Live Photo Gallery to import the same image twice?

  I've seen discussions that mention preview images and select the pictures that have not yet been imported.  Well, it's a solution, but there must be a better way.  I have thousands of photos, several I like to keep on the camera for one reason or another.  I want Windows to recognize which images have already been imported, is this possible?

  Hi Homeeey

  You import the camera in the same folder where are stored the old photos?

  Visit this link and follow the steps:

  http://www.Microsoft.com/NZ/DigitalLife/media/transfer_photos_from_your_camera_to_the_computer.mspx

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just upgraded to El Capitan, which automatically "upgraded" iPhoto in Photos.  When I opened the Photos, my thumb nails is blurred with the exception of those that have been published in iPhoto.  This never happened in iPhoto.  How can I fix?

  I just upgraded to El Capitan, which automatically "upgraded" iPhoto in Photos.  Now when I open the pictures, my thumb nails is blurred with the exception of those that have been previously published in iPhotos.  When you click on a fuzzy thumbnail to select it, the picture is very good. The photos were initially imported into iPhoto via the camera memory card to JPEG.  Is there a way to fix this?  I take lots of photos for a local spca and this will really slow me down in the decision-making process on the pictures to use.  I'm not a very tech savvy person any help with this is greatly appreciated!

  If you pick a few and twist and turn then back it is this resolved? -If this is the case you can do in large groups for the problem photos

  LN

• Import: Image think Photos is already imported

  Hello!

  I had this problem at the time where I used iPhoto instead of Photos as well. The problem persists with Photos.

  When I was important with iPhoto, the rare but not too rare occasions, iPhoto show me one of the images I tried to import next to an old already imported picture, which is completely different from one being imported, asking me if I would like to import this duplicate image already imported. The two images were nothing so much, I do not understand why you would think that they are the same.

  My NEX - 6 has a DSCXXXXX of naming system, the Xs is numbers. I think it started from the beginning once before, after hitting DSC99999, months there are many, but I don't think that's the problem. Only one or two images (off maybe a hundred) imported would be confused with photos already imported.

  Photos seems to do the same thing, but in a most annoying manner. iPhoto will ask if I want to import the "duplicate" in any way, but just Photos sticks Photos under already imported, who can bring mixed with photos in fact already imported. For this reason, I have to format the card on the camera after each import, which is boring and annoying that I liked to carry a portable backup with me on camera.

  

  Here, the image shows that the images "Already imported" were taken on July 28. It is today. The last import what I did yesterday, I come back from a shoot. I remember taking this picture about an hour ago, and I certainly not imported anything today. Photos of restarting does not solve the problem, or don't take out them and reinsert the SD card.

  

  The evidence here, the last image was taken on 27 yesterday.

  It's a bit of a pain. Someone at - it ideas? Any response would be highly appreciated! I have not been able to find an answer or a similar position elsewhere, if there is, please excuse me. Thank you!

  I have not seen this, but sometimes I had tell me I was import a duplicate image when both had nothing to do with each other at all - I just short it off as because it's a computer - and I do not have seen all the other posts on this subject

  LN

• Photos will not import iPhone photos

  I'm trying to import pictures from my iPhone 5 s on my MacBook. However Photos will only recognize new pictures although I have hundreds that have not been imported on Photos or iPhoto. Image capture will not also recognize other photos on my phone. I have no idea how use AirDrop and am completely at a loss on how to get my pictures on my computer and my phone.

  It's a big question, Alicia. I lost of valuable photos, myself and always want to make sure that they are safe now.

  I'm sure you've seen these instructions before, but it also contains information on how you can share photos on all your devices using iCloud photo library. Import photos and videos from your iPad, iPhone or iPod touch

  If these are pictures that you already imported, with your iPhone connected to your MacBook Pro and the Photos app opened, under the "Import all new Photos" button on the top right, you should see a toggle button for "show all". When you click on that, it will display all photos that are found on your iPhone. You just choose the ones you want to import and then click the "Import # Selected" button where the ' # ' shows how many photos you have chosen to import.

  AirDrop is also a great way to transfer photos from your iPhone to your Mac. How to use AirDrop with your iPad, iPhone or iPod touch

  Let me know if this is helped. Thank you!