Photoshop 7, XP Mode, Virtual Machine... Scanner?

Similar Questions

• Is it possible to save the xp mode virtual machine?

  I was wondering if there is an image that I can back up so I did not reinstall every time I reformat

  Hello
   
   
  Yes you can do it manually.
  Here's how:
  1. open Windows Explorer and navigate to %USERPROFILE%/Virtual Machines. It is the default location of the files vmcx. You will see a Windows XP Mode.vmcx file. This XML file contains the full path to the files that make up your virtual machine. The default full paths are:

  %UserProfile%\AppData\Local\Microsoft\Windows virtual PC\Virtual Machines\Windows XP Mode.vhd

  %UserProfile%\AppData\Local\Microsoft\Windows virtual PC\Virtual Machines\Windows XP Mode.vmc

  2. When you browse to %USERPROFILE%\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines, you can see additional files depending on the State of the virtual machine (that is, is this hiberated or not). If the virtual machine XP Mode is put in hibernation, if these additional files will appear:

  Windows XP Mode.vmc.vpcbackup
  Windows XP Mode.vsv

  3. the vmc and vmc.backup files are XML files that contain full paths to vhd files. If you restore on a different path, you will need to modify the XML files so that all file references are accurate and consistent. Windows 7 does not a VMS-specific automated backup.

   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP mode virtual machine does not start after the upgrade to Windows 10

  Hello

  After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

  It shows:

  This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  VMware Workstation 12.1

  Hello

  How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

  I fear that the statement is pretty much on the mark.

  Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

  See also:

  https://support.Microsoft.com/en-us/KB/2724115

  You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

  --

  Wil

• Maintenance mode migrates virtual machines only from GUI

  We have 6 * 5.1 with configured ESXi HA, DRS and a 5.1 Vcenter.

  If we put an ESXi in maintenance mode through the user interface of Vcenter all virtual machines will be to migrate to other hosts, there is no problem at all.

  But if we put the same through VMA host in maintenance mode, virtual machines will suspend mode and the host goes into maintenance mode. On the GUI in Vcenter we get a message that a migration will not work in the current state. Due to the fact that the message is in German, there's not so much sence to post it here, I guess.

  Background is, we have two or three guests time in different places. Two locations in separate buildings, with separate power supply and separate UDP for this purpose.

  So if a location powerd down the udp Protocol must stop the hosts in this place and the virtual machines have to migrate over.

  SVMotion is not necessary, the SAN is a unit of mirroring automatc.

  Please take a look at Re: scripted Maintenance Mode to see if that helps.

  André

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Unable to connect to use Windows XP mode on a Virtual Machine, cannot share files between the Virtual Machine and host

  Because of the need to run some XP programs, I ordered Win7 Pro and installed a Virtual Machine with XP Mode.

  Managed to get it going somehow, but does not connect to my home network (can't see any other computers, which seems to be common with the host of Win 7, but here, I managed to install quick links to other computers - they will not work in XP Mode), even if the Internet connection is working perfectly.

  In addition, I can't find a way to share files with the host country, drive C appears to be different from that of the hosts with no common points (where it is currently stored beats me).

  I can access a USB key, but only at a price to make it unavailable to the host and the attempt to release his capture when running XP Mode failed.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Virtual machine 2007 Using scanner/printer

  I'm not a savvy computer person and try to solve a problem. I have a HP scanner that I love, but is not compatible with Vista (no), so after trying a number of workarounds that does not, I stumbled upon the 2007 virtual computer. I got it up and running, Windows 98, added connected my scanner and printer with their drivers and thought that my prayers have been answered. Then my scanner icon in the status bar was a red cross through it. I then read that VM 2007 has no USB support. I use a "USB adapter for 25-pin parallel printer Cable" for my scanner and printer. I have other options here? I really want to throw my scanner. Thanks a lot for any advice.

  Sun VirtualBox and Windows Virtual PC allow you to create a virtual machine and access the host USB connections. Boulder computer Maven

• Cursor is to select all (select mode forced) and I can not type - Windows 7 on a virtual machine

  Hi all

  I'm working on a Microsoft Virtual Machine, in the middle of a laboratory. (So I don't want to restart the whole machine - tho I'm and restarting all applications on the machine.)  the problem: my cursor selects all as my pointer moves on the screen of any Windows application is open. I've been using SQL Server Management Studio 2012, but the same is occurrin in Excel 2010. This translates into not being able to type just something - it destroys the stuff I already typed, obvviously, since it is the selection of stuff, I don't want to not selected.  I tried to hit the ESC key already. I looked with settings for sticky keys and toggle keys, and none of them seem to apply. I can't understand what I enabled and how to return to the normal insert mode. I searched help and there is nothing on the SELECTION MODE.

  Help!

  Thank you

  Sarra

  San Diego, CA

  SHIFT + S got me off the problem - she did replace the text with a capital S so I guess all I had to do was something like, followed by a cancellation to get my back text that has been deleted by typing something. That took me to be stuck in mode 'selection '. I don't have the problem anymore.

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• Is it possible to use a virtual machine like XP Mode to use a driver that is incompatible with Windows 7?

  The driver is for a former Lego Mindstorms USB IR Tower. The device itself appears in Windows 7, but there is no drivers compatible with a 64 bit version of Windows 7 or Windows Vista. I know with certainty that the driver is compatible with XP SP 2 and a 32-bit version of Vista, and it could be compatible with a 32-bit installation of Windows 7.

  I have XP Mode, set up on Windows 7 64 bit machine, but the unit will not go through to the virtual machine. I read on another forum that if the driver of a measuring device is not compatible with Windows 7 the device does not appear in the virtual machine.

  Is there a workaround that doesn't involve using a separate XP machine or installation of XP on a virtual machine of third party such as Oracle?

  Don't know if this will work in your situation, but you can disable checking 'signed' driver for Win7
  in the start menu. Jut tap F8 during Windows startup, and then choose-
  Disable the Driver Signature Enforcement among the startup options.

  .

• Using vmrun to obtain an IP address when you run the virtual machine mode headless fails customers

  Operating system: OS X Yosemite 10.10.5

  VMware Fusion: Professional Version 8.1.1 (3771013)

  When you run a VM guest in headless mode I can't use vmrun to get IP clients. If I eventually bring to the top/start the merger GUI, the command returns the IP address as planned. It is always reproducible.

  $ vmrun -T fusion start "path/to/MyVMs.vmx" nogui
  2016-06-12T10:55:46.626| ServiceImpl_Opener: PID 11515
  
  ... wait for VM to come up. If the VM has a static IP address I can now ssh into the instance.
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  Error: The VMware Tools are not running in the virtual machine: "path/to/MyVMs.vmx"
  
  $ vmrun -T fusion checkToolsState "path/to/MyVMs.vmx"
  installed
  
  ... Start the VMware GUI and ensure the VM's console window is open
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  192.168.100.23
  

  I tested with open-vm-tools and tools VMware packaged with the merger and the behavior is the same. I also spoke with others on the channel of freenode #vmware who have confirmed that the problem exists for users of workstation as well.

  Hi danandham,

  Welcome in the vmware community. Iyou s really a problem, we try to fix it.

  After a command, you can use as a workaround:

  vmrun t fusion getGuestIPAddress "path/to/MyVMs.vmx" - wait

  See you soon

• backup of the virtual machine fails HotAdd mode if the virtual machine is running?

  backup of the virtual machine fails HotAdd mode if the virtual machine is running?

  sometimes. When vmware tools is outdated, some os comments will be omitted to suspended snapshot. During this time, the backup may have failed.

• Will be the virtual machine starts on another host (during the blackout) if he can't switch to Maintenance Mode?

  Hello

  We use a cluster with 2 5.1 ESXi hosts.  When attempting to place an ESXi host in Maintenance mode, he failed and said "not enough resources to satisfy configured level of failover for HA.

  We would like to know, just in case where one of these ESXi hosts failed, VMs will be start on another ESXi host (at least some) or all of them will be down (i.e. None of them start)?  If no virtual machine will be migrated, we will change our level of failover for HA.

  Thank you

  This occurs when you enable admission control on your HA cluster. When the failure of the host occurs and you have Admission control is enabled, it will let all market on the other host machines because it violates the constraints of availability.

  If you turn this off all VM is switched even if you do not have enough resources to accommodate all the s VM on a single host. On a long term, I would say that you have sufficient resources to allow this to happen. But for now, you can turn it off and try.

  

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-