Photoshop CC - Error Message about the graphics card

Similar Questions

• KKKKK displays an error message with the graphics card during the installation

  My laptop is a DV6 6121tx with QB367PA #ACJ product number.

  During the installation of kkkkk, it displays an error saying not able to recognize the graphics card in the system.

  Please suggest an update secure for the soul if they are available.

  HP support assistant details of my graphics driver:

  Radeon (TM) HD 6770 M

  8.882.2.3000 (30/09/2011)

  Hi champakBhumia,

  Welcome to the HP forum!

  Here is a link to the HP Pavilion dv6-6121tx Entertainment Notebook PC specifications and HP Pavilion dv6 Notebook PC Maintenance and Service of Guide , which will provide a recommended list of replacements.

  I hope this helps.

• Photoshop CS5.1 on a laptop Presario 2570US: error message on the graphics card

  I just installed PS CS5.1 on my Presario 2570US for the first time. The first time I launched, he froze. After a reboot, it launched but gave an error message "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software. "

  The display driver is the Radeon IGP 345 M, the driver from ATI Technologies is v. 6.14.10.6436, dated 15/05/2004. Update of reports of driver that it is not just recent, better driver.

  What should I do?

  CS5.1 is compatible with the 2570US?

  Since posting my request, I went to Adobe PS help forum and searched. There is a LOT of discussion of this error message, which seems to have emerged since CS4. Seems to be triggered by a variety of unrelated things: too little RAM for their tastes. wrong settings of Open GL in PS (parameters vary with the video driver card); driver is installed. All user comments, apparently no gurus from Adobe. If it doesn't seem to be a problem of HP.

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• pixel shader - get an error message about the 2.0 pixel shader

  Why do I get an error message about the 2.0 pixel shader and how can I solve this problem

  This indicates that your video card is not capable of using pixel shader 2.0 technology.
  Check that your video card is compatible with the minimum requirements of the game or software you use.

• I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  If you are on subscription, you just install it on your new computer and sign in with your ID Adobe that you used to buy PS when you arrive up to two installs, it will tell you that you have exceeded you install limit and asks if you want to disconnect other computers. Just so disconnect you. No need to have to disable or call Adobe!

• Failure message from the graphics card Dell Inspiron 580 s

  Hello

  A week ago I was on my PC and I get a black screen, saying: my graphics card has failed and needs to restart the PC. So I did and it worked perfectly afterwards, so I don't think anything at the time. Yesterday, I got exactly the same problem occurs, then I ask it to see if I need to replace or not. My graphics is the graphics card Intel (R) Graphics integrated 4000. The PC is 6 years old and has been used a lot, so I think it's towards the end of his life.

  Thank you for what you never answer and if you need more information, just ask.

  OS: Windows 7 Pro

  BattleGaming

  I plan on rebuilding the PC in about a year, but I'm just wanting to make sure that it is not a Fatal problem.

  It is a with a TFX power supply mATX chassis. You should be able to Exchange in a mother mATX 1155 or 1150, at the expensive of invalidating your Windows license.

• Question about the graphics card of the Satellite P50t-B-108

  Hello

  I think to buy the Toshiba Satellite P50t-B-108 model.
  Can you tell me if this phone has some kind of graphic hibrid (he uses both the graphic processor Embedded Intel and AMD one?) or simply the radeon graphics processor?

  I need to install a linux distribution (I might go with ubuntu, but it's not important) and what I need to know is if the HDMI works...

  Thank you.

  Hello

  As far as I know the Satellite P50t-B-108 was equipped with the graphics card AMD Radeon R9 M265X.
  In addition the Intel® Core i7-4700HQ processor supports the Intel HD Graphics 4600
  This Intel HD 4600 graphics unit is part of the Intel CPU.

• Question about the graphics card of Satellite P30 144

  Hello
  I have a Satellite P30-144 and I need to know if the graphics card is integrated to the motherboard or is separated.
  I play a lot of games online and you need to know if I need to go out and buy a new one, cause my graphics card does not work on the new moh airborne

  Ty for your help

  Colin

  Hi friend

  Sorry I have to tell you that it s not possible to update your computer with a new graphics from the vga chip is embedded on the motherboard.

  Almost ALL of the toshiba machines were "wired" so graphics card if you don t one machine of 30,000 dollars for weld and a LOT of know-how for reprogramming BIOS as the guys at toshiba @ Japan then take your thoughts on the upgrade of the VGA.

  If I were you I would upgrade my RAM instead or if you really want to play games with your machine then you can order this thing:

  http://tech.Yahoo.com/CES/null/11883

  Welcome them

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• To remove the error message about the network drive

  I have W7 Home and recently restructured.   I had this problem of reformatting finally a long time ago and it is solved but do not remember how.  Whenever I boot, I get the message "connection impossible network drives.  When I click it, I see the Epson printer has a red X on it and says Epson memory card.  The printer has always shown in my computer, but it works very well.  All I need is to get rid of the error message.  I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring!  Thanks for any advice.

  Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts.  They say that it is a Windows problem, not them.

  To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive.  I find the error message disappeared and the printer works fine.  I don't know if there's a problem with that.

• Error message about the folder drafts ("mailbox does not exist")

  Hi, after having added a third account to my office of Thunderbird, I receive the Error Message after 30 seconds or more:
  "the current operation on the drafts did not. "the e-mail server for account [email protected] replied: there is no mailbox.
  Can anyone help solve this? Sending and receiving mail seem to work perfectly.
  Thank you very much
  Eli

  The current path to store such projects as configured in Thunderbird may not correspond to your IMAP server folders.

  Check first if you subscribe or if the folder exists on the server, then check if it is correctly configured in your account settings, as shown in the attached two screenshots.

• I get an error message about the virtual device Drivers__as said in the body - section add details below.

  SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers. VDD. format of pilot of virtual device in the registry is invalid. Choose 'Close' to terminate the application.

  You try to run an old MS-DOS program in Vista?

  "16-bit programs are not supported on 64 bit versions of Windows Vista or Windows 7."

  Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657

  If it is not something like the above, you may have to get clarification on what you try to do when you see this error message.

  http://www.Google.com.au/search?q=virtual+device+driver+format+in+the+registry+is+invalid&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = yCCMS_bsGoze7APkzKSzDQ

  How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
  http://support.Microsoft.com/kb/931362/en-us

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Windows Vista Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/details.aspx

• I get an error message about the Core.dll

  When I try to open a file, I get a fatal error message.  Acrobat failed to load the DLL base.  What can I do to fix this?

  http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html