Photoshop CS3 portable is not compatible with Windows 8

Similar Questions

• Why Photoshop elements 11 is not compatible with Windows 7?

  Why is Photoshop Elements is not Compatible with Windows 7?

  Why is Photoshop Elements is not Compatible with Windows 7?

  How to get to this conclusion? The tech specs clearly state it is:

  http://www.Adobe.com/products/Photoshop-elements/tech-specs.html

  If you have problems, just to explain.

  Mylenium

• Photoshop Elements 10 is not Compatible with Windows 10 accoring to Adobe cat (Amit)

  I just wanted everyone to know what I have just been told by the Chat option on the site of Adobe by Amit. He said that Photoshop Elements 10 will not install on Windows 10 because it is not compatible. I asked what the options were and he said Adobe Photoshop elements 13. I aske if this was not totally compatible and he said he was under test at the moment. I asked how long it would be before finishing in tests and he said that he had not been told.

  I am very disappointed that Adobe is so slow in getting their product tested. I need to use this type of software, I now have to look at another application.

  I jump No. we else falls into this trap.

  MikeF

  Your Photoshop Elements 10 10 Windows (assumed 64bits) information obtained from Adobe is not correct.

  I upgraded a computer of Windows 7 Professional SP1 64 bit for Windows 10 Pro 64 bit and installed Photoshop Elements 10 of the installation disc 2 of 5.

  He had no problem installing it. No sharing of Technologies or other message that blocked the way to a quick and successful installation.

  I had a view of Photoshop Elements 10, when I went to open for the first time. The message read:

  "Some features of Adobe Photoshop Elements require that Microsoft Internet Explorer 5.0 or later is installed. These features will not work without it. "I got this message even after that I managed to install Photoshop Elements 6.0 on the same computer. The 6.0 and 10.0 properly on window 10 Pro 64 bit. Anxiety on the Microsoft Internet Explorer 5.0 or higher due to the fact that Windows 10 has replaced Internet Explorer with Microsoft Edge. But despite that everything works.

  Note: I find that Internet Explorer 11 is still hidden on Windows 10 and can be used there (PIN to the taskbar if necessary for convenience). See Local disk C\Program Files (x 86) \Internet explore if you need it.)

  
  

  In regards to the error of... shared technology that has a long history for Photoshop Elements and Premiere Elements installed. It can hit any version on any operating system. A lot of home remedies. One that worked for me and others is renaming the OOBE specifically to OLDOOBE folder and then install the elements.

  I have two of my computers upgraded to 64-bit Windows 10 and have many versions of Photoshop Elements and Premiere Elements on them. So far, I found that the problems are the same before and after the upgrade to Windows 10. And, in general, they run for me without problem.

  It is hoped that R_Kelly dwell on those not too big, just aggravating issues since I have not found their still as I managed to use Photoshop Elements 6.0 and 10.0 on Windows 10 64-bit. According to R_Kelly...

  BTW photoshop elements 10 install and run on windows 10, but there are some issues, not major, just aggravating circumstances.

  Please consider the above, before making your decision about moving forward to 13 items in Photoshop. But, remember, if history repeats itself, Adobe should release a new version in September October 2015 (presumed named 14 Photoshop and first items 14 and included organizing 14 elements).

  Any questions, please inquire.

  Thank you.

  RTA

• I want to reinstall Photoshop CS3 in a new laptop with Windows 10. I have CS3 SN and ready media. If I have 'disable' CS3 to my old laptop, I'm OK to go ahead and install CS3 in the new portable computer?

  I want to reinstall Photoshop CS3 in a new laptop with Windows 10. I have CS3 SN and ready media. If I have 'disable' CS3 to my old laptop, I'm OK to go ahead and install CS3 in the new portable computer?

  Yes, provided that your existing serial number is for Windows.

• My Abobe photoshop 4.0 is not compatible with my Windows 7 a mild wear. It was, but for some reason any won't work now. I thought it was time to try a new version of photoshop and somehow ended up with a cloud, and apparently will have to pay for access t

  My Abobe photoshop 4.0 is not compatible with my Windows 7 a mild wear. It was, but for some reason any won't work now. I thought it was time to try a new version of photoshop and some sort finished with a cloud, and apparently will have to pay for access to Photoshop elements, which is everything I wanted in the first place. Is there a way I can get out of this oblogation to $120.00 and go to Staples and buy Photoshop elements 14?

  You may have to wait until Monday because of the long holiday weekend in the United States

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  > finished with a cloud and apparently will have to pay to access Photoshop elements

  I don't know what you bought, but Photoshop Elements only not part of the cloud

  Also, to install or run version 4 with Win7, did you do a RIGHT click on the program and select a compatibility mode from the option list?

• Compaq Presario: NVIDIA GeForce 6150SE nForce 430 chipset is not compatible with Windows 10

  I try to upgrade to Windows 10 and I get message that current chipset is not compatible with Windows 10. My PC is Compaq Presario motherboard M2N68-(NARRA5). Is there a graphics card for this motherboard is compatible Windows 10?

  You need to burn a DVD to install windows 10. It's going by checking the video card. https://www.Microsoft.com/en-us/software-download/Windows10 32-bit or 64-bit. Then after win 10 is installed, and then install the 32-bit or 64-bit driver http://www.geforce.com/drivers/results/82758 64-bit video dated the 2015 http://www.geforce.com/drivers/results/82701 32-bit dated 2015 good luck it really works

• X 1 carbon Windows 10 upgrade problem: "it is not compatible with windows 10 display.

  Try to update to W7 (64-bit) to W10 on X carbon 1. W10 diagnostics return with "the display is not compatible with Windows 10." All display drivers are huge downloads and I don't know which one to use. I'm NOT a tech person. Help? Thank you.

  
  

• Windows 10 November update stops at 32% saying that Intel 5100 Iris was not compatible with windows 10

  I use a Mac Mini 2014, El Capitan, Windows 10 Pro with Bootcamp

  I'm trying to update my existing windows 10 in 1511 10586. 32% the system constantly to say that installing Windows 10 his is not possible, as the Intel 5100 Graphics Iris is not compatible with Windows 10. On the other hand I'm already on Windows 10 with Iris 5100 with no problems. No idea how t resolve that? I did find something similar in any other forum...

  Thanks for your help!

  Windows 10 1511 pushes a WHQL driver on the 5100. Before you start the upgrade, please disconnect the Internet Mini/Windows and then try again. You can also disable the automatic updates of Windows.

• OneKey Rescue is not compatible with Windows 7

  Hello

  Recently, I installed my free upgrade to Windows 7.0. I was invited during installation that the OneKey Rescue 6.0 is not compatible with Windows 7.0. Is there a program I can download and use?

  Thank you!

  OneKey Recovery 7.0 for Windows 7 32 bit

  OneKey Recovery 7.0 for Windows 7 64 bit

  Take advantage of .

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• XP to Vista upgrade, the message that Vista is not compatible with Windows XP

  Original title: Upgrade Vista XP

  I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?

  Hi Dennis,

  The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista

  Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.

• HP Mini 110-3101TU: HP Mini 110-3101TU is not compatible with Windows 10?

  I've been running my HP Mini laptop in Windows 7, IE11 with an external (extended desktop) Samsung SyncMaster LS23A300BS/XP with no problems of navigation. All drivers up to date. I received a free upgrade for Windows 10 I installed online 2 weeks ago and have not been able to make a good navigation on the internet yet, either on board or IE11: both crash in browsers after a 2nd or 3rd browser, blocking and the opening page process may not be finished in Manager tasks so that Windows can not stop (you need to disconnect). I followed all the advice, corrections and common sense (clean boot) pertaining to this crash, but nothing works. On top of this crash, there is a problem with the application of Windows Explorer which can not read a statement in memory at shutdown of Windows 10 and must be closed in the first place. The last problem occurs only (I think) when working with the external montor, when I work with the laptop only I've not seen this message (can not read the instructions...) when stopped down, but blocks the navigation happens tirelessly with one or two monitors.

  I played with the DNS (using automatic 8.8.8.8 etc. and DNS), I also run a PowerShell (tip forum) command and disabled non-Windows file extensions and all supplements but did not touch the registry other than adding two words for maximum 10 tabs/server. Nothing helps.

  Question: My Mini laptop too old and incompatible (surfing the internet) with Windows 10 or maybe Windows 10 faulty (buggy)?

  I am writing this post with my old Compac HP 8710p with the same monitor external but digital (DVI/HDMI cable) in VistaSP2 32bits Business that works like a 'charm' (pun intended). I could not even connect you to this forum with Windows (crash) 10.

  Any suggestions and help would be appreciated

  Track 5 September 19:00 (GMT + 8 hrs.)

  Not crashing with browsers (Edge and IE11) but still very slow and often-page response cannot be found and freeze, then after updating but I am now able to close the frozen pages (no more crashing, process in normal Task Manager). The message Windows Explorer app that it cannot read a statement in memory occurs that when my external browser is connected (2 active monitors) and does not show using my laptop just so it's probably Intel graphics driver related. I didn't know I was downloading Defender 5 updates yesterday that there is nowhere a notification in Windows, 10 with a slow (home, 2 G WIFI) internet connection may have caused some of my problems, but Microsoft has promised to look into the crash problems I brought today and I'll post the results shortly. I type this follow-up with my HP Mini and IE11, Windows 10...

  Frank

  To follow this thread on the Microsoft Forum please see:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-networking/HP-mini-110-3101tu-not-compatible-with-Windows-10/262e92c9-5f73-4333-BC46-fb5b229fbdea

  Frank

  Updated: 9 September

  I found three issues that I fixed and most of the problems have disappeared now, internet Windows response is still slow compared to VistaSP2 and IE9 but which can improve with W10 updated.

  The last driver Synaptics touchpad from Synaptics and Windows 10 fix1 support web page: load automatically downloaded an update.

  Correction 2: Downloaded Intel driver 3150 8.14.10.2230 (2010) of the web page of the HP support and ran Windows 10 compatibility check, saved results to setup.exe and then install the (older) driver on my graphics driver (2015) Intel 3150 more recent that I have downloaded from the Intel support web page but is not compatible with the HP Mini 110 series. This caused the accidents of Edge and IE11 (zoom).

  Fix 3: run 2 commands (admin) NETSH: netsh winsock reset and netsh int ip reset c:\resetlog.txt which improves the response of browsers, but after restarting the need for procedures to be repeated, if all goes well in a future update of the W10, will address this issue.

  I think that my HP Mini is now compatible Windows 10

  Frank

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• Error: "drive could be damaged, or it could be in a form that is not compatible with Windows.

  Original title: CD - R driver problem please help if you can

  I have a white mark of Memorex CD - R into my drive (D :) and when I try to read it, this happens, "disk may be damaged or it could be in a form that is not compatible with Windows. I have Windows XP on my desktop, any suggestions for help? :(

  Hi MichaelPrincipe,
  -Other recognized CDs without any problems?
  Try to use the CD on another computer and check if it is recognized without any problems.

  Run the fix it tool is given in the link below and check if it helps.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to open any PDF... y at - it a patch?

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  "numetro" wrote in message News: * e-mail address is removed from the privacy * .com...

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  FAQ Adobe "Acrobat 7.0 and earlier versions do not support Windows Vista. Adobe does not plan to release updates to Acrobat 7.0 and earlier for Windows Vista compatibility. «You'll need to level of Acrobat 9 (or later) to ensure full compatibility with Vista and Win 7.»