Photoshop CS5 will not work now that I've updated to El Capitan?

Similar Questions

• Photoshop 6 will not open now that I updated my mac software

  I have improved my softwear to 10.8.4 mac and now my photoshop 6 will not be open.  All I see is a logo in photoshop with a cross through it.  How can I fix?

  Run the Creative Suite cleanup tool, reinstall the program.

  Mylenium

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• My old version of photoshop CS5 does not work in OSX El Capitan

  My old version of photoshop CS5 does not work in OSX El Capitan. Is it possible to fix this or do I have to update photoshop?

  Yes, you should be able to open the files of the 5 CC of Photoshop CS.

  Also, there is not much difference in the toolbar.

• my photoshop cs5 will not recognize my canon eos 70 d raw photos

  my photoshop cs5 will not recognize my canon eos 70 d raw photos

  No..  In view of the considerable volume of posts during the last two weeks, I can see why you referenced the 2 7.

  Randy, the D-70 was released after CS6 is released.  Adobe didn't not reverse retains compatibility with older versions of Photoshop - a way to upgrade.  Unfortunately you must use the link above or upgrade to CS6 DNG Converter.

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Photoshop CS2 will not work with RAW images in the Minolta DimAge A2.  It allows to work properly

  I used Photoshop CS 2 with my DimAge A2 for 5 years in the RAW format.  Now it will not work with RAW with my camera.  I'm using Vista 64.eu all the answers?  Thank you

  It seems to me that you probably had to reinstall Photoshop CS 2.  If this is the case, then, you must download and install Camera Raw 3.7.  The version that was on your installation disc has been updated several times.  And one of these probably included updates support for your camera.  Install RTAs 3.7 and see if that helps.

• Photoshop CS5 will not update Camera Raw CS5 won't open CR2 files in bridge

  Canon's CR2 6 d files will not open in bridge. I also shoot with a Canon 50 d and all images imported very well from this camera.

  I have also tried to update to photoshop CS5, but will not work. Say error whenever it load to 100%.

  [Ask in the correct forum allows... Moved from non-technical Forum Lounge on deck forum... MOD]

  To the 6 d, you need Camera Raw 7.3, which is available for CS6. You will need to use the free dng converter and save a version of Camera Raw 5.X to PS CS5 can open it.

  Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Photoshop CS5 does not work on the new computer

  Hello world!

  I bought the teacher edition and student of CS5 for Mac in November 2010. I bought a new Mac and put the software on my new computer. InDesign, Illustrator, bridge, and Acrobat will open it (and good work to the best of my knowledge). However, Photoshop gives me an error message and does not open:

  

  I have no idea how to solve this problem.

  In the near future, I want to upgrade CS5 to CS6. But for now, I wish I could use Photoshop I have. I looked in my Plans and products on my Adobe account and the product is. But it's not a download to re-download it. And honestly, I don't remember if I was a physical download or digital download when I initially put the software on my original Mac.

  Any ideas or suggestions on how to fix this?

  Thank you!

  PS - also, Dreamweaver, Fireworks, Flash Catalyst, and Flash are all in my Applications folder. But I think they're just there because I did a try before you buy CS5 Adobe. Would this be the case? When I try to open applications, a box will appear asking for a serial number or an option to start using these applications on an experimental basis. I tried to put my purchase of CS5 serial number just in case it was accurate, and he says that's not a correct serial number. And my research indicates that these applications are not part of the standard package CS5. Are they only in my Applications folder because I used them once on a trial period?

  First set ' Allow downloads of "to"Anywhere"CS5 are considered to be an application not signed because it was released before Mac Gatekeeper.

  By doing this, you can ensure that the installation of CS5 is not blocked.

  

  When CS5 is installed, the next step is to update Adobe Application Manager

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  When this is done, you can open Photoshop CS5 and run Help > updates to get all of the updates in.

  If there is a problem, let me know.

• Photoshop CS5 will not draw an oval

  Photoshop CS5 and Windows 7, are suddenly unable to draw an oval with oval elliptical selection tool. He draws a circle perfectly... without hold the SHIFT key. Now button or hold is not the shift makes no difference. A perfect circle every time. Any thoughts on what could be the cause?

  In the Options bar, you will see Style.  I suspect that you have updated report sets

• Dell Dimension 9200. The orange light flashes. Power disconnect day + this market but stop and it will not work unless that unplugged for a day

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  A flashing orange power LED, usually indicates a power supply problem power, given the age of the Dimension 9200, which is highly likely.

  Try to replace the power supply with a power supply of labour "Known", to see if that makes a difference.

  This system does not use an exclusive power of Dell, you can install most power supply ATX with a power connector 24 pin or 20 + 4 pin main motherboard and this can be purchased in most local computer stores, or online.

  The 9200 has a rear panel open, a diet with or without the on/off switch can be installed.

  Note: You need a PSU with six SATA power connectors.

  Otherwise, you can buy a refurbished Dell OEM [Dell P/N KH624] 375w PSU from here:

  http://www.Amazon.com/Dell-dimension-power-supply-KH624/DP/B0039OHV2O

  Bev.

• Cloud/lightroom/photoshop creation will not work

  I downloaded these yesterday and they lead me to the top of the wall. They will not run. I get error 16. Help file was told to uninstall and reinstall which I tried to do it, but got nowhre. I am now in a good picle. I just want to empty lot and start again, but could not find a way to do this. I'm totally hacked off the coast with that. I'm no computer wiz kid, but this should be easier?

  Uninstall lr, ps and your desktop cc application.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the application to install ps

  test the ps.  If no problem install lr.

  When a problem, explainm

• System Restore will not work, said that there is an error and try a different restore point

  When I try to use the system restore it always fails, it says there is an error and try a different restore point, I did several times and it still does not work, can you help me. Thank you

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• My stamp of duplication for Photoshop CS5 does not work.  How to reset preferences?

  How to reset the preferences of Photoshop CS5?

  Hi indigousa,

  Please visit the following link: preference file works, names, places | Photoshop CC 2014

  Kind regards

  Tanuj