Photoshop - Gif - no image in the timeline image animation

Similar Questions

• Card built in Photoshop applies a blur on the timeline

  I built a map in Photoshop by joining screenshots of Google Maps. I find that when they are imported into first 5.5 it blurs when played on the timeline.  The size of the image is 3752 x 2169 and 8.6 MB in size.  I have experimented with the density of different pixels with the same result.  Export the timeline as H.264 and reimport the same result if I suspect that it will appear like this on my Bluray drive.

  Project settings are PAL 1920 x 1080 50 fps Progressive

  I never noticed this phenomenon with still pictures. Is there a way to fix this?

  Alistair

  Your resolution of reading together is full?

• Images added to the timeline lost their alpha channel

  Hello

  I use first elements 11.0 and added a few png-imags chronology (in another channel the film imported). Each image has a completely opaque pixels and a part with completely transparent pixels. Initially, he appeared fine exactly as I wanted it. But when I added the fourth table, or so, all transparent pixels in black images.

  Images look exactly the same source. I tried to save their new with Photoshop and Paint.NET. I tried to delete a photo and add it again. I tried the first Elements of closing and opening it again. Somehow, nothing worked.

  I checked him 'interpret' the film - window and there is no check mark in front of 'Ignore Alpha Channel' for one of the images.

  I hope someone here can help me ;-).

  Thank you

  Gordian

  Why workded the first several of PNG, but has stopped working, is a mystery to me. The only thing I can think of would be if the pixel x pixel size of those of PNG is large, there may be a problem of resources, when enough are added to the timeline. What are pixel x pixel size of PNG?

  The film and all the images have a resolution of 1920 x 1080. I use Windows 7 Professional x 64 with 8 GB of RAM on an SSD. All project files are found on my HARD drive (internal).

  In the meantime, it is good that you have the solution to workaround to use PSD with transparency, to get your project done, but I am surprised by the behavior of your exposed PNG. A riddle for me.

  That's what I did: I opened the png files in Photoshop CS 6 and saved once again that the psd files. Then, I used 'Replace the sequences' in Premiere Elements to swap files png to psd files. It did not work, the transparent pixels in fact everything went black.

  I wrote that I had success with a new psd file - not with the images I actually wanted to use.

  I don't really know why, but I had to recreate the images from scratch again once (Fortunately, it wasn't that difficult or time-consuming). I saved them as png again files (because I do not really see any reason why that should not work) and imported. This time it worked as it was supposed to. But I can assure you that the new images had exactly the same as the 'old' pixel data.

  I guess it was some cache error. I said not a part of the story, because I thought it was irrelevant. When I had five of my pictures working properly, I used a png on the source files compressor (I had a backup of them). It compresses a third of the original size - but also replaced the transparent pixels to whites (must have used the wrong settings or so). Premiere Elements noticed the changed files and show them in the project now. I copied the backup files to the wrong files and now the files returned to their original state in Premiere Elements. The problem started when I added the following image to the project.

  I managed to finish the small project as planned, but I still wonder about this strange thing. Thanks for your reply though. How to mark this issue as resolved? That I have to take a "good response" (but then I don't know which one to choose)?

  Post edited by: reinc - me
  I fixed the formatting of the citation.

• Photoshop, GIF image accepting do not?

  I have an image of 600 x 367 px GIF & 56.5 KB. I created a new project of Photoshop to size 450 x 450 px, opened my GIF picture & tried to drag-and - drop the image of my new project using the move tool (it's the process that I did in the past with success), but the image is not in the project?

  Please someone advice me what of wrong here and how can I change my GIF image.

  (I'm using PS CS3 on Windows Vista)

  You must first change the mode of the file GIF in Image-> Mode-> RGB color

• When I scroll through the mask of image sequence does not follow the layer of the timeline?

  Another problem. I simply scroll the image sequence and you can see on the screenshot that the mask remains where it was in the beginning. I applied red tinted effect (just to show you), and it does not stick to the station when scroller is at the end of the timeline which is say that the mask is not to follow. But it should, because the mask is the image sequence. Why? Please take a look. Maybe there is something wrong with the Ctrl c and Ctrl v method - it's how I inserted my BW mask in the layer mask?

  

  Select the two layers of video group and convert it into object new Dynamics

• Image on the timeline issue

  Help! Whenever I have import a. PSD file and drag it on my calendar, it does appear that some images. I need it to be 5 seconds, but I can't drag to make it longer.   2 black lines show also on each on the image layer. Could someone help me with this please?

  Thank you

  Alex

  The most likely problem, you were importing as sequence checked button. This will give you images that think of AE is a movie and you will not be able to change the point of exit in the timeline panel. Solve the problem by disabling the import as a sequence switch.

  The least likely problem - you obstructed the path that you have saved the PSD file.

• Captivate9 images only play correctly in the timeline with a simple click of the 'play' button. Images not working don't not in publication or in part mode.

  Design of a project in Captivate 9 and I have slides which have up to four images appear as audio talk about them on specific slides. My problem I have is when I single click on the play button on the timeline, images, and audio all play properly and in sync. When I select to get a glimpse of a slide or publish the file. Captivate times only the first picture on the slide, none fade in or disappearance of the first image and 2nd image doesn't appear at all. Or my other images will appear. Any suggestions or recommendations for my number is greatly appreciated.

  Tami

  When you use play Slide you do not have a real overview.

  As I suspected; you have added 3 buttons, which are a break from the slide to 1.5secs. This means that only objects that have their chronology from before these points of suspension will not be visible until you click on these buttons. You have another click box, I do not know for what reason, which suspends the slide at its end.

  Either move you the point of suspension to a location after the entry of the last image button, shortly after 40 seconds and you can get rid of that click on the box or going out the break FRO the buttons and keep the click box. Use the timing Panel to get rid of the break for the buttons if it is your choice.

• PNG image does not appear in the timeline in first Pro CC

  Hi all!

  I have created many images PNG for InDesign. I exported with transparent background. When I import into first and I double-click on it in the project, they appear as a source, and you can see the text that I created in the foreground and the background transparent. All good up to this point. However, when I add it to the timeline, the text (foreground) disappears and you will see that the background transparent.

  
  Why is this? How can I get the text in the PNG appears in the timeline panel? I want to use the png as overlays on images I have, but they don't show up.

  
  As you can see in my photo below, on the left you can see a transparent background and text on the lower left corner. When I add the PNG to the timeline, then the text disappears and you will see that the background transparent.

  

  Thank you

  Victor.

  The sequence is larger than the png?

  Have you tried to reduce the size of png, change of position, or by creating a sequence of png?

• Interpret the images to get slow mo vs speed setting in the timeline

  I shot a bunch of video for a 'live' style music video I put together. This will be my first of those, so it's a little experience. I shot it at 60 fps (59.94) with the intention of the final product being a video of 30 frames per second or maybe even 24 fps, but with all these additional images to create some nice slow mo here and there. The problem is that a lot of it has been saved just all at once, so there may be parts of a clip I want at regular speed and in the same clip I want to be slow. I might want to same ramp from one speed to another, but that's another question.

  I know two ways to get slow mo:

  (1) interpret images such as 29.97 or 23.9something to get the slower speed

  (2) changing the speed in the timeline panel

  Is there a difference between the two methods? The first is more pain because it means I have to reproduce each of the clips if I want to use two clips of normal and slow speed. But if the other is using an interpolation rather than the actual recorded frames, then I would rather have the hassle of the first method. If it is not, however, does mean that I can safely use keyframes to ramp from one speed to the other? Thank you!

  It there is a difference between the two.  Interpretation to match the settings of the sequence will show all images, no interpolation.  These are the best results you can get.

  In setting sequence at any frame rate, not corresponding to the sequence will show interpolation, and which includes speed bumps.  In the past these results were not as good, but with the addition of optical flow, that difference in large part has been reduced to nothing.

  My advice would be to test you each method, make observations, and then you will know which is best for a given element.

• Photoshop CS6 will not open the file image (.jpg, .dng and .cr2)

  Hello

  I recently reinstalled my laptop (64-bit) Windows 7 Pro. It has all the necessary Windows updates.

  I installed Photoshop CS6 (64 and 32-bit) and I've installed all the updates it needs.

  It will not open any JPG or RAW, .tif, .jpg, .dng and .cr2 files. Before you reinstall Windows Photoshop worked well.

  When I try to open an image file that Photoshop does not open, so the file type is associated with Photoshop, but that's all. The software is running, but it won't open the jpg or tif, and it does not open Camera Raw to display the RAW file.

  If I double-click on a new image, then a new instance of Photoshop is open, in addition to the already open instance, but still no picture.

  If I click file-open and navigate to the file it will then open in Photoshop and Camera Raw 9.1.1 and the picture shows successfully.

  Strange!

  The only thing I think currently, is that I have 2 partitions on the laptop, with C: and a D: readers, with the users folder, which is held on D. Photoshop is confused by there? Well it is exactly how the laptop has always been in place, and it was already defined in this way before Photoshop has been installed.

  I tried to uninstall and reinstall. I tried to install just Photoshop 64 Bit, not 32 bit (I don't really know why I get the two offered, to be honest.)

  I am now lost and would like to receive helpful suggestions!

  I "solved" this problem!

  It seems that Photoshop won't open these files from a Windows 7 'Library' that points to a redirected folder.

  However, if I create a mapped drive with a drive letter local, the actual path of the files, (for example \\Server\FolderRedirections\Michael\Pictures), then it works OK.

  It is a good work-round and it makes no difference to me if I use a mapped drive or library I put just one correct, in the section 'Favorites' from Windows Explorer.

  Thanks for the suggestions guys, that helped me a lot. I hope this answer helps someone else, even if my situation may not be a common scenario.

• Why can't drag an image in the timeline as I used to?

  I do an animation of cartoons. Normally I open windows Explorer and drag an image of it on the timeline. I left my open project and came back a few hours later. When I tried to drag an image in there, he would not go. I restarted my computer and tried with another project. It still does not work.

  It turned out that the problem was that my default image length has been low. I have set up to 0.5 seconds of 0.1 second. It worked fine after that.

  Thank you!

• How to add video effects to images in the timeline in Adobe Premiere Pro CS6?

  Hello

  Can anyone help me please with the following? I use Adobe Premiere Pro CS6, and I have a sequence of images which I imported it in video editing. I want to apply the effect 'Chained' to all the images, but I'm not able to add the effect to all images at once? I can do one at a time without problem, but it is of course very time consuming when it comes to the thousands of images.

  I've tried highlighting all and CTRL + C, CTRL + V with no luck. Any help would be appreciated, thank you very much.

  Before putting pictures on the timeline, use "Automate to sequence" with the cross dissolve as the default transition. Cross dissolve is not an effect, but a transition.

• How can I get the videos and stills to appear in the order early in the timeline, and not all images so all the videos. I chose the oldest Date

  Hi I have a mix of photos and video clips loaded into my Mac Adobe organizer of the external drive, where they show (on PC) in the correct order as, still images and videos mixed. After loading in the Organizer, and chronology in first 12 items, I select more "old first". But in the timeline, stills appear first in the correct order, then after that video clips, in the correct order in themselves. Is it possible to actually load everything in the right order, IE pictures and videos mixed. Thanks Chris

  Chris

  Thanks for the follow-up.

  Be strictly one of the Windows elements, I can not give you a 100% guarantee for the use of the organizing elements Mac Albums to get your first items editor Timeline ordering media, but what I've read, the chances are good for working on the item Organizer organizing Mac as well as windows.

  We will review your progress as your schedule allows.

  Best wishes

  RTA

• Why can I not select the image clicked in the Timeline?

  Can someone give me a heads up as to why I wouldn't be able to click on the image clicked in the timeline in order to y to insert an image? I click, but nothing happens.

  Right-click and choose Insert keyframe

• Images Photoshop look washed out in the first

  Some of my photos from Photoshop CC 2015 (and bridge) established first as psd files (and some jpg) appear washed out and less than the original. Many times they are not, however. I tried 'Original Edition or retouching in Photoshop' first, but that doesn't help - the Photoshop and Bridge image simply looks different from the first a. I need first look the same good Photoshop image edited.

  One point: I have worked in Photoshop CC 2015 (subscription of $9.99 / month Photographers') but in Premiere Pro 5.5. When this issue came up, I started a trial of first Pro CC version, and the problem persists.

  Help, please.

  KDOC

  Thank you very much for the offer. While I was waiting I kept trying this or that. I think it is now resolved: If you're doing a "save under", instead of a backup and then uncheck the box "ICC profile: Adobe RGB 1998", the changes made in Photoshop and then reflected in first. " I have not yet seen of workaround still works, but hope.

  If I'm going to continue to work in PrP5.5 or go to PrPCC is always open. 5.5 works faster for me because I have to recognize my card Nvidia 260 (minor hack), and the Mercury engine is effect. I can't get the PRP to do, and will have either a hack or a new video card. All the suggestions of the hack or an affordable card?

  Thanks for responding.

  KDOC