M1522nf freezes at startup with > > > > >

Similar Questions

• S20 freezes on startup with installed PCIe card

  Today I made a new S20 (4105 - 94G) Win 7 x 64 BIOS: 60KT31AUS

  I installed the Quadro FX 580 without problem.

  When I tried to install a Firewire 800 PCIe 1.1 card x 1 system freezes during startup, with the ThinkStation screen with the Intel logo visible. No error message, no beeps. I waited for several minutes. This happens in all three PCIe free slots (x 1, x 4, x 16).

  The card in a Sunix FWB3414G (LSI chip).

  I would like to know 1) if any of you have this card work in an S20, 2) suggestions of what to try next.

  Thank you very much in advance for any help or advice.

  Pedro.

  
  

• Vista freezes at startup, with the logo of "Microsoft Corporation".

  Hi all

  For some reason any when I turn on my computer Vista is stuck at the 'Microsoft Corporation' logo screen, with the little green loading bar and it will not move beyond this point. I must then hold down the off button to turn it off and then use the repair system (or is it restart?... one that will automatically appear anyway...) I have to use the system restore too) etc. to make it work. The problem is that this happens about half the time I turn the computer, so is a slow process that I had to endure.
  Someone at - it ideas? I hope this means does ' t that I format the hard drive and reinstall Vista, that is not something I know how to do...
  Other points to note are that it seems to be related to Antivirus programs... I had Norton, and sometimes when the above problem happened, once connected, Norton would say that my computer has remained and a whole bunch of things were turned off... I could not turn them back on. I gave Norton a while ago, and it seemed to fix it for a while. However occasionally I have AVG and a similar problem occurs now (although very rarely... normally, the computer hangs just at startup as shown above). I also noticed that Startups will take much longer now, and sometimes if the computer is past the screen of Microsoft Corporation, it will be just a black screen for about 20 seconds and sometimes comes up with a message referring to the registry keys (I don't remember the exact message). He eventually starts however.
  I also found the similar question: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/af488955-1080-4329-a5a0-774916c7341e
  I used the File Checker system as stated in the answer to the question above, but the result was "no breach of integrity", so I guess that's not that.
  Thank you, and any help would be appreciated,
  kcodon

  Hi kcodon,

  Thank you for using the Microsoft Windows Vista Forums.

  You must remove the external devices connected to the computer to check the issue.

  Try to start the computer in safe mode.

  Follow the instructions below to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear. If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. check that the safe mode option is selected (the High option of the page)

  4. press ENTER. The computer then begins to start in safe mode.

  If this does not work, let us start the computer in a clean boot state to determine.

  To perform the clean boot procedure, follow the instructions in the link below.

  http://support.Microsoft.com/kb/929135

  Perform the clean boot procedure to find the service that is causing the problem.

  If the problem persists, you need to do the upgrade inplace to solve your problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows ME freezes on startup with WEAK 32. dll

  How can I solve this problem

  WinME is no longer supported - the time to buy a new computer.

  [Tip: get one with a spellchecker.]

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• G50-70 freeze at startup

  Hi, I have a G50 - 70 is only around the age of 2 months. Since then, he has had a problem with the immediate freezing at startup on the Lenovo screen where white swirling points stop. It happens about 1 in every 2 or 3 times it starts.

  I thought it would be Bios so I installed the 2 updates that have been released without effect. I tried to turn it off to quick start and the alternative boot - USB, LAN options.

  Any suggestions?

  Thank you

  Hi Rich5555,

  Have you tried to reinstall the driver and check the issue?

  Try to start the system in safe mode and restart the system and check the question, also perform system retore and check for the issue.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• EliteBook 8540w randomly freezes at startup

  Hello

  Since I activated the encryption of the hard drive in HP ProtectTools and invalidate it later, I experience random freezes at startup of Windows 7 Professional 64 bit. The gel has also occur when booting from the Windows 7 DVD and a reinstallation of the operating system Windows 7 also has not fixed the problem.

  Help, please.

  Thanks in advance,

  Donenzone

  You might want to try a complete reformat of the hard drive and reinstall W7.  Ugly process, but then you will have a better palce to start with future debugging if necessary. However, before you do a reformat, try the following two procedures.

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a. Plug your PC give a TI a go.

  Here is another list of things to try:

  1. Download cookienator (it's a gift) and clean the House.
  2. Open my computer and right mouse click the hard drive--> properties--> disk cleanup
  3. Start Internet Exployer--> tools--> Option Internet--> delete browsing history
  4. Open my computer and right mouse click on the hard drive-->-->--> Defrag tools properties now
  5. Open my computer and right mouse click the hard drive--> properties--> tools--> Check now
  6. Open the RUN and enter the following commands:

  cmd

  sfc / scannow---> it will check your critical system files and try to fix

  output

  7. open the window RUN and enter the following command: chkdsk

  8 restart and see how things are going.

• New computer freeze at startup

  I just got to build my new computer about a week ago and it was a lot of work. This morning it was freezing at startup. When I click on anything whether it's Windows, it freezes. When I hover over anything, it freezes, etc. I'm sure it's a software problem, because when I start in safe mode, it works fine.

  I read that Avast! has given people of the problems with the gel, so I tried to uninstall, and it does not solve my problem. I also installed Malwarebytes and ran a scan in safemode, it detected only a very small PUPPY, nothing serious.

  Since it works fine in safe mode, I hope that the problem can be easily solved, but I don't know how to fix. It's really frustrating because it worked fine before, but now all of a sudden, it isn't.

  Any help is appreciated.

  Hello

  Think that material.

  Remove all power and then reinstall all the memory cards and cables (at both ends where possible).

  Check the memory.

  Update BIOS, drivers from the chipset of low level and all main dashboard and separate device drivers.
  Check with Support from the manufacturer of the motherboard, their online documentation and drivers, and
  Ask problems known in their forums. Do the same thing to individual device manufacturers.

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• laptop freezes on startup

  Hi, I m having hp Pavilion dv5-1110em laptop computer with windows 7 ultimate version 64 bit... in the last week he stop from and freezes at the windows logo but working safe mode, but today the safe mode also freezes at startup when loading the drivers... now I get no option to boot up my laptop I didn't not recovery also disks... Please help

  Yes, I've tried everything...

• Applications Mac 2015 CC freeze at startup since the update

  I ran the updates last week and each CC app now cycles constantly, causing my computer to slow to a crawl and freezes at startup and I have to force reboot the system with my power button. Whenever my volume Directory is damaged and must be repaired.   I reinstalled DW 2015 and it can work, but my apps CS6 certainly work, unless I try to start a CC application first.

  "Here is a sample of my messages to the console of the PS that level."

  added support of microprocessor extension. » :

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: Httpentete of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: ProxyManager of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:35.763 PM Adobe Desktop Service [1803]: dynamic_cast 2 error: one or more of the following type_info has hidden visibility.  They should all have public visibility.   N8CryptoPP20StreamTransformationE, N8CryptoPP36CipherModeFinalTemplate_CipherHolderINS_16BlockCipherFinalILNS_9CipherDirE0EN, S_8Rijndael3EncEEENS_14CBC_EncryptionEEE, N8CryptoPP28AuthenticatedSymmetricCipherE.

  30/04/16 2:57:53.123 PM Adobe Desktop Service [1803]: warning: Gestalt gestaltSystemVersion selector returns 10.9.4 instead of 10.11.4. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  I did remove and reinstall before Manager app and creative cloud... I'm on a slow internet connection if updates or reinstall takes me 12 hours.

  I suspect that part of the problem may be the internet CC... but not sure audit services.   I'm quite frustrated to give up the entire suite of CC.

  I had to reinstall my whole OS El Capitan among other attempts to try to solve this problem...

  OK, I come to the broad support with apple and it seems that CC is no weird GPU calls that are not finishes and the programs are suspended.

  GPURestartReportEnd

  30/04/16 2:44:29.000 PM kernel [0]: attempt to restart GPU (AMD over-pants D500)...

  30/04/16 2:44:29.000 PM kernel [0]: [2:0:0] unable to reset hung GPU! result = 151 ulResetBlockBitmap = u 0 x 00008000lResetResultBitmap = 0 x 00008000

  30/04/16 2:44:34.000 PM kernel [0]: [2:0:0] GPU HangState 0x00000000, 0 x HangFlags 00000006: IndividualEngineHang 0, NonEngineBlockHang 1, FenceNotRetired 1, PerEngineReset 0, FullAsicReset 1

  30/04/16 2:44:34.000 PM kernel [0]: * GPU ASIC startup Log *.

  -

  HangFlags 0 x 00000004 GPU: AsicHangState 0 x 00000004, AsicResetRequirement 0x00000002

  IndividualEngineHang: 0

  NonEngineBlockHang: 0

  FenceNotRetired: 1

  PerEngineReset: 0

  FullAsicReset: 1

  HangEngineBitmap: 0x00000000

  ------------------------

  PCIe AMDTahitiGraphicsAccelerator material: [2:0:0] State: ENABLED

  Configuration: deviceBits: 0x5009679e, capabilityBits: 0x30840b00

  TotalVideoRAMBytes: 0x00000000c0000000 (3221225472)

  Path: / Applications/Adobe Photoshop 2015/Adobe Photoshop 2015.app/Contents/MacOS/Adobe Photoshop 2015 CC CC CC

  40? (Adobe Photoshop CC 2015 + 3845113) [0x10bef6bf9]

  40? (Adobe Photoshop CC 2015 + 3843018) [0x10bef63ca]

  40? (Adobe Photoshop CC 2015 + 11471088) [0x10c63c8f0]

  / Applications/utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10279091f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10278fe66] 1-40

  0 x 100000000 - 0x100e17fff <77B964CF-C5AD-343F-B912-2186CF942FBF>Node/Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 102782000 - 0x1027bafff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  Path: Applications/Utilities/Adobe Creative Cloud/*/CCLibrary.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10766f91f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10766ee66] 1-40

  0 x 100000000 - 0x100e17fff node <77B964CF-C5AD-343F-B912-2186CF942FBF>Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 107661000 - 0x107699fff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  ------------------------

• Dreamweaver 2015.1 freeze at startup and during shutdown

  Win 7 x 64 SP1

  5960 x cpu

  MB: RAMPAGE EXTREME V

  64GB mem, Gskill

  ASUS Titan X GPU

  Zalman PSU 1000HP

  Stable the system otherwise.

  It always starts by ' switch to ' / 'Retry', sometimes it just freezes at startup for several minutes.

  and when shutting down, it freezes just minutes.
  

  This happens all the time... I'm fricking out!

  Thank you!

  The problem, or one very similar to it, seems to have something to do with the functionality of cache for the site of DW. A workaround that has helped others is to create a new site and leave it empty then switch to this empty site just before turning off.

  If this does not help, I would also try to disable the Cache of the Site all together...

  1. go to Site > Manage Sites

  2. highlight the site and click the button change

  3. go in advanced > local news

  4. uncheck the box enable Cache

  5. save

  6 rinse and repeat for each site

• Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

  Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

  Leo,

  You can try the list (5) being less likely).

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.