Photosmart 7510. Program photo prints are very green

Similar Questions

• Photoes printed are not equal to calibrated screen

  I have Photoshop CS3, calibrated screen (with x-rite eye - one display 2) all-in-one printer HP Photosmart 7283. The prints are not the same colors on my screen. How to solve this problem?

  I see that the i1 offers a luminance target setting. Not only that, he has a prior calibration function that allows to use the OSD of the monitor controls to get as close as possible to the target before the calibration. It is the best way to do it.

  Read the manual (you need to be in advanced mode). Then go to a target of 100-110 cd/m².

  Fact.

  Then go to the dialog box print in Photoshop. Under color management, click on 'Document '. It should say Adobe RGB.

  Choose "Photoshop manages color".

  Then, under "Profile of the printer" see if there is a that corresponds to the printer and the paper you are using. If not, this means that HP provides no profiles for this printer. In this case, you must use "Printer manages color" and the foregoing is questionable.

  If there is, take it, and then click 'Print settings' to take you to the printer driver. Here, clear color printer (ICM off or similar) management. Again choose the correct paper type so that the printer use the right amount of ink.

  That's all there is. I repeat myself just from this point. Basically, I said all this in the first post in the PS Windows forum.

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• Photosmart 7510 want to print photos off smart phone on photo paper but ends by printing on a4

  Photosmart 7510, I want to print pictures on my smart phone, when I tried always printed on A4 plain paper even if there is no photo paper in the photo paper tray, im obviously something wrong or missed something.

  I understand you are trying to print photos on photo paper. If you use a device the Hp ePrint home and Biz app android and iPhone download Hp ePrint app download. With the application after you have selected the photo, you can go into the settings and select paper size.

  Let me know if it helps.

• HP Photosmart 7510 will not print duplex documents

  I just installed my 7510 photosmart printer and it won't print in duplex mode.  The drop to double face two choices:

  print long edge to short edge

  If I choose one of these options, I get a message saying that they are not supported.  I have a mac book pro, which is pretty old and I'm running OS X 10.6.8 previously, I had a printer photosmart/premium (C309) and the dual faced with worked on it.  I am at a loss?

  Can anyone help?  Two-sided printing was one of the features that I really wanted in the printer.  Thank you.

  Hello

  From my experience the alert only invites you for the margins unsupported and not by lack of support for Duplex printing are taken in charge by your printer.

  For duplex printing different margins used, click on continue to confirm the alert automatically changes the format of paper according to and printing should be performed.

  If you stil have a problem printing duplex, go to System Preferences > print & fax.

  Doublt click the printer, and then click the printer setup button.

  Make sure the duplex module is enabled on the driver tab.

  Please let me know of any other matter,

  Shlomi

• HP photosmart 7510 don.t print double-sided automatically auto option not available

  I check the devices, and although my printer has the possibility of two side attached, it says no option 2 faces.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  E-all-in-one printer - C311a - drivers HP Photosmart 7510<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  Photosmart HP printer 7510 e-all-in-one - C311a - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP PhotoSmart 7510 does not print

  We have installed and had the HP PhotoSmart 7510 up and works fine on our wireless.  Then, we called HP to download an application.  HP technician decided to 'fix' our PC.  While working on this issue, we started to notice that MS applications were disappearing.  They told him to stop and he did.  But he was not able to restore the PC or applications.  We spent 4 hours with Microsoft in order to get things to where they were.  Since then, we did not have the ability to print on the printer.  The printer thinks it connected to our wireless and can make updates or less says that we have the current software.  But our PCs and laptops can not find on the wireless.  I noticed you said someone else to check the IP address of the printer and that he shouldn't be 169.254.  The IP of the printer is 169.254.237.217 and I can't change it.  It is the problem and how do I change the IP address?  The wireless is configured with the channel 11 and WPA and I don't want to monkey with it.

  169.254.237.217 is an IP address not valid. I would try the printer connected to your wireless network. To do this simply use the front panel of your printer and use wireless configuration wizard.

  Let me know if it helps.

• Impossible to get HP Photosmart 7510 C311a to print borderless Photo 4 X 6

  Whenever I print a 4 X 6 Photo of my printer HP Photosmart 7610, it leaves a white border. I can't find a selection of photo 4 X 6 borderless paper size selection drop; only 4 X 6 or 4 X 6 tab is available. How to print without borders?

  Hi, the setting can be found in the Preferences\Advanced\Borderless print 7510 printing.

• Photosmart 7510 does not print on photo paper

  I have photos saved on my computer.  When I try to print one, the picture come out on printer paper, photo paper, I installed.  I lost so much ink to try to understand this point, and I'm sure it's probably a simple thing that I do not. Can anyone help?

  I checked to make sure that I was connected to the correct computer with HP advanced chosen paper and photo tray

  Click devices and printers.

  Right-click on the 7510 & select printer properties.

  Click device settings.

  Make sure that the Photo Tray is available.

  

• HP Photosmart 7510 is not printing

  For the last year I had the probems with my iMac not conencting on my printer. I tried several patches left on other forums to reslove the issue and I am now in the position where I am connected to the printer, but I can't print anything. Details, equipment and history are listed below:

  Equip-

  Apply iMac OS X 10.10 Yosemite.

  Photosmart HP 7510.

  Drivers HP v3.0 for OS X (last Downlaoded and installed 23 Nov 14).

  Plusnet Technicolor TG528n router.

  Details-

  The printer is connected via the printers and Scanners Utility and the HP printer Proxy.

  I can print a test page with success.

  Another thing I print seems to go through the queue correctly but does not print.

  I do not receive other error messages.

  History - I changed the following parameters according to the other forums.

  The router is set on a fixed 6 channel and a fixed frequency of 2.4 Ghz.

  I deleted all printers by resetting the printing system.

  I reinstalled the latest drivers and restarted the computer. (This moment meant the iMac could find the printer - it lacked before that).

  I added the printer HP now found the menu printers and Scanners.

  Everything seems normal but no printing comes out, other than the test page.

  Please can you help and get back to print.

  Thank you.

  Hi @Clisson

  Theoretically speaking, if we had a USB cable connected and determined that the question was the router, I would have recommended call you your router company.

  If we had determined that the problem was related to the computer, I would have proposed as follows;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• 4 "x 6" photos Print almost completely green. Paper size is fine.

  Printer: Photosmart 7525

  Impressions size full article very well... only 4 "x 6" is printed in green, ONLY.

  I think that a cartridge is low, or maybe dirty print head. This document for Troubleshooting Print quality problems may offer help.

• Photosmart HP 7520: photo printing from the phone to the printer using eprint

  I managed to install my new Setup / printer eprint services.  Everything works fine so far.

  However, I sent a photo from my iPhone to the printer and it printed on ordinary paper, photo paper No.

  Is there anyway to say ePrint to print a photo, or am I doomed to do on paper?

  Please advise,

  Thank you

  Billy

  Hello

  Are you happy now?

  Have a good weekend.

• my photo folders have been deleted and I can't get back them and they are not in the Recycle Bin, how can I recover these photos they are very important

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  On Monday, December 6, 2010 09:09:06 + 0000, krazychild18 wrote:
   
   
  > Remember - this is a public forum so never post private information such as numbers of mail or telephone!
  >
  > Ideas: programs you have problems with error messages recent changes you do on your computer that you have already tried to solve the problem
   
   
  Please do * not * leave the text above in a question to ask you. Delete it.
  It has nothing to do with your question. And please ask your question
  in the body of the message, not in the title.
   
  How to get deleted? If you remove them normally, they must be
  in the trash. If they are not, read point 1 below (but also pay
  Special notice to the point 2):
   
  1. "deleting" a file does not actually delete it just marks the
  available space be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.
   
  So your chances of successfully recovering these files are decent if
  you try to recover immediately after their deletion and quickly
  down from there. If you use the computer since
  (for example to read this answer and write that question), your
  chances may be very weak now.
   
  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer and bring
  it to you on a floppy disk, CD or USB to try.
   
  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.
   
  2. If you have files that are important to you, and you do not
  back them up regularly, you are playing with fire. It is not a question
  to know if you lose them, it's a question of * when *. You could
  you want to read this article on the backup that I wrote:
  http://www.computorcompanion.com/LPMArticle.asp?ID=314
   
   
   

  Ken Blake, Microsoft MVP

• my printer hp photosmart 7510 will not print text

  I installed a new printer cartridges and now my printer does not print any text, but test pages show the color bars and text boxes, but no word at all. It worked perfectly until I changed the cartridges. Any suggestions?

  Hi Robert,

  This problem can be caused if the ink cartridge is not properly installed or malfunctioning in the print heads.

  1. what application you use to print?

  2. have you tried to print with another document or file?

  3. is installed correctly in the printer ink cartridge?

  Follow the steps in the link below to check if the new cartridge is installed correctly.

  Printer cannot print black ink or color ink or prints blank Pages:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03760656&cc=us&DLC=en&LC=en&product=5070121

  Follow the steps to solve the problems of text printing.

  Unable to print? Print jobs are stuck in the print queue:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&cc=us&DLC=en&LC=en&product=5070121#N5150

  If the problem persists, I suggest you to contact HP support from the links below:

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

  
  

  HP Support Forums:
  http://h30434.www3.HP.com/PSG/

  For reference:

  Why can I not print? :

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• : HP Photosmart 7510 does not print port cn25u3501f05px

  Printer does not print.

  Failed to remove 'which is printing' point-tried cancel, delete, interrupt and restart, turn off printer, even the fact of unplugging the printer and repluging it.

  The port is cn25u3501f05px, but I don't know if that means anything.

  Hi @Susie12345

  I moved your posts to keep them together rather than trying to keep track of our conversation on multiple threads. Please use the following steps to remove the software and reinstall it again;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.