HP Photosmart 7510 is not printing

Similar Questions

• HP PhotoSmart 7510 does not print

  We have installed and had the HP PhotoSmart 7510 up and works fine on our wireless.  Then, we called HP to download an application.  HP technician decided to 'fix' our PC.  While working on this issue, we started to notice that MS applications were disappearing.  They told him to stop and he did.  But he was not able to restore the PC or applications.  We spent 4 hours with Microsoft in order to get things to where they were.  Since then, we did not have the ability to print on the printer.  The printer thinks it connected to our wireless and can make updates or less says that we have the current software.  But our PCs and laptops can not find on the wireless.  I noticed you said someone else to check the IP address of the printer and that he shouldn't be 169.254.  The IP of the printer is 169.254.237.217 and I can't change it.  It is the problem and how do I change the IP address?  The wireless is configured with the channel 11 and WPA and I don't want to monkey with it.

  169.254.237.217 is an IP address not valid. I would try the printer connected to your wireless network. To do this simply use the front panel of your printer and use wireless configuration wizard.

  Let me know if it helps.

• : HP Photosmart 7510 does not print port cn25u3501f05px

  Printer does not print.

  Failed to remove 'which is printing' point-tried cancel, delete, interrupt and restart, turn off printer, even the fact of unplugging the printer and repluging it.

  The port is cn25u3501f05px, but I don't know if that means anything.

  Hi @Susie12345

  I moved your posts to keep them together rather than trying to keep track of our conversation on multiple threads. Please use the following steps to remove the software and reinstall it again;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• my printer hp photosmart 7510 will not print text

  I installed a new printer cartridges and now my printer does not print any text, but test pages show the color bars and text boxes, but no word at all. It worked perfectly until I changed the cartridges. Any suggestions?

  Hi Robert,

  This problem can be caused if the ink cartridge is not properly installed or malfunctioning in the print heads.

  1. what application you use to print?

  2. have you tried to print with another document or file?

  3. is installed correctly in the printer ink cartridge?

  Follow the steps in the link below to check if the new cartridge is installed correctly.

  Printer cannot print black ink or color ink or prints blank Pages:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03760656&cc=us&DLC=en&LC=en&product=5070121

  Follow the steps to solve the problems of text printing.

  Unable to print? Print jobs are stuck in the print queue:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&cc=us&DLC=en&LC=en&product=5070121#N5150

  If the problem persists, I suggest you to contact HP support from the links below:

  Contact HP:
  http://welcome.HP.com/country/us/en/contact_us.html

  
  

  HP Support Forums:
  http://h30434.www3.HP.com/PSG/

  For reference:

  Why can I not print? :

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HP Photosmart 7510 will not print duplex documents

  I just installed my 7510 photosmart printer and it won't print in duplex mode.  The drop to double face two choices:

  print long edge to short edge

  If I choose one of these options, I get a message saying that they are not supported.  I have a mac book pro, which is pretty old and I'm running OS X 10.6.8 previously, I had a printer photosmart/premium (C309) and the dual faced with worked on it.  I am at a loss?

  Can anyone help?  Two-sided printing was one of the features that I really wanted in the printer.  Thank you.

  Hello

  From my experience the alert only invites you for the margins unsupported and not by lack of support for Duplex printing are taken in charge by your printer.

  For duplex printing different margins used, click on continue to confirm the alert automatically changes the format of paper according to and printing should be performed.

  If you stil have a problem printing duplex, go to System Preferences > print & fax.

  Doublt click the printer, and then click the printer setup button.

  Make sure the duplex module is enabled on the driver tab.

  Please let me know of any other matter,

  Shlomi

• Photosmart 7510 does not print on photo paper

  I have photos saved on my computer.  When I try to print one, the picture come out on printer paper, photo paper, I installed.  I lost so much ink to try to understand this point, and I'm sure it's probably a simple thing that I do not. Can anyone help?

  I checked to make sure that I was connected to the correct computer with HP advanced chosen paper and photo tray

  Click devices and printers.

  Right-click on the 7510 & select printer properties.

  Click device settings.

  Make sure that the Photo Tray is available.

  

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• Photosmart 7510 will not scan. Print, fax, Eprint, everything works, but not software for scanning

  I spent over 10 hours on the phone with Technical Support, Cloud Computing service and an escalation of HP handler.  The escalation of HP Manager ran a cleaner tool to remove completely all HP printer software and reinstalled.  Now, everything works except for analysis.

  Using the utility to scan the PC gives HP, "the series of HP Photosmart 7510 was not found"

  Using Scan of the computer for the printer display gives, "make sure that the HP printer software is installed.  I can, however, scan-to-one chip memory inserted in the computer, but is produces a jpg file and I need PDF.  All scanning software worked before technical support and escalation of HP is involved.

  Hi Bob,

  I discovered that Windows has made a number of updates to security on my computer.  Therefore, windows do not see the 7510 as a device scan and judged that he was a suspect and deactivated engine part analysis of the HP software.

  Reinstall the printer as a wireless printer, and then by reactivating the printer to scan, my HP software came back and now everything works as advertised.

  I think you were on the right track.  Then analysis stops on an HP printer without apparent reason, check if there's any recent Windows updates.  If so, reinstall the printer as a new wireless printer.

  Thanks for your comments!

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart C6380 does not print the entire page

  My HP Photosmart C6380 will not print whole pages.  Some lines close to the end of the page are not printed.  From time to time, it prints the whole page.

  Hi mercierm,

  Welcome to the HP forums!

  I see that you are working with a Photosmart C6380 and sometimes it seems not to print the whole page and other times he does it. I'd love to help you find a solution to this problem

  To start, you are able to print an extended self-assessment report and it came out completely, or if you make a copy of a complete page, never there issues? This will contribute essentially to determine if it is the hardware or software, but since it seems to be sporadic we are not able to limit too much more. You can also try the steps of cleaning in this document "on paper" Error Message and the printer is not Pick Up or paper feed .

  Let me know how it goes for you!

• Photosmart 6525: will not print in black

  My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

  Hello

  Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

  Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

  Do not take into account the title.

  Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

  Please let me know the result and if there is anything else I can help you. Thank you.

  

• HP Photosmart C4780 do not print directly

  HP Photosmart C4780 do not print directly

  Solved the problem by reaching my finger in the back and jumping of the machine advance with my fingernail.

• All-in-one printer, HP Photosmart 7510 does not recognize my computer as part of the network.

  Range of all-in-one printers, HP Photosmart 7510

  The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer)   It prints fine from the computer, however.  HP ran diagnostics and cannot find the problem in their system.  Suggested that I try to find a solution to the millisecond.  I was unable to find a solution yet.  Can anyone help?

  Hello

  I suggest try to connect your printer to the computer and check if the scanner works.

• HP photosmart 7510 don.t print double-sided automatically auto option not available

  I check the devices, and although my printer has the possibility of two side attached, it says no option 2 faces.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  E-all-in-one printer - C311a - drivers HP Photosmart 7510<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  Photosmart HP printer 7510 e-all-in-one - C311a - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Brand new Photosmart 7510 does not connect to Web Services

  Nice day! I am trying to solve a problem for a customer and I hope that someone can help you. I found a couple of other discussions with the people affected by this problem, but the solution did not help. My client has a Photosmart 7510 is all new and it made me get setup for him. The printer is configured, connected to its wireless network, the software is installed on his PC 3 and I can print of each of them. However, we are not able to activate the Services Web is a key reason that he bought the device.

  When we try to turn on Web Services, the printer successfully checks for an update (none are available) but then times out during the server communicating with Web Services... scene. I get the same result if I try to activate Web Services via the printer, thanks to its web Interface or via the installer driver on a PC. Depending on the Network Configuration Page, the printer is properly take an IP address (including DNS) from the router. I tried to set an IP through the web INTERFACE as well by changing the DNS servers 8.8.8.8 and 8.8.4.4 with no improvement. I tried power cycling router of my client and I also tried setting the parameters of encryption on the printer manually instead of using the automatic mode. All computers, my laptop and iPad can use Internet very well, but Web Services will not be activated on this printer.

  Is there any other suggestions that I can try? Is it possible that Web Services are just down right now? This particular unit is defective? My client bought this partially to access ePrint impression from his iPad, so it is essential we get active Web Services. If anyone can help, I would be very happy. Thank you!

  Hello PXAbstraction,

  The servers are being updates not scheduled at this time.  The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again.  If this is not enough, let me know and I'll see what I can do.