Photosmart 8450: "Device Setup doesn't have all the.

Similar Questions

• Photosmart 7510 - I want to use only black ink since I don't have all the need for a color.

  Photosmart 7510 - I want to use only black ink since I mainly use this for work and don't have all the need for a color. If I have more ink, can I just replace the black and it still work? Thank you very much for any information you may have!

  Hello

  I did a few test last year, you can print black only master always need color ink for the printer. Black setting only as a default printer will only print black and it consumes a little over heating of the process color inks. In short, it will not be printed correctly when run out of color ink (s) or does not start at all.

  Kind regards.

• How will I know if I have all the drivers, my computer needs to work properly?

  Original title: hard drive

  How will I know if I have all the drivers, my computer needs to operate correctly

  Hi albertogon15,

  Information devices are listed in the Device Manager. If there is no fringe on any of the items in the Device Manager, it means that the device driver is working properly.
  See what is Device Manager?
  See also, get help with Device Manager errors.

  You can also check the Windows updates or visit the device/system manufacturer to see if there are updates available for the devices connected to the computer.
  See automatically get recommended drivers and updates for your hardware

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  I would change my windows again because is working dosent good can you tell me how I can do it because I have all the vista cd

  You don't say what kind of discs to have.

  Here is the info on how to reinstall using a Vista DVD from Microsoft.

  For all other Vista reinstall information, contact the manufacturer of your computer.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page.

  Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.

  have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.

  Thanks for help

  Best regards

  the problem has been resolved.

  I forgot to write rel = "stylesheet", that was the problem.

• new operating system mac Sierra would have all the features and capabilities that El Capitan?

  Hi all

  new Sierra mac OS is available for download. My current OS is El Capitan. If I install this Sierra he would have all the features and capabilities El Capitan has?

  As far as I know, they have not eliminated all the features; They added a few however; You can read about them here:

  https://www.Apple.com/MacOS/Sierra/

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I want to buy street and travel 2013 but I want to have all the information I have in the old version 2006

  I want to buy the new version of the street and travel 2013 but I recolected a large number of points that I don't want to lose, because I have version of streets and trips 2006, I would be able to have all the information in the new version? and if so, how do I get? is there a guide or automatically all points will be received in the new version and what about mappoint 2013, could I also get information of street and travel to mappoint 2006 2013?

  Hello

  Check with streets and trips in support of the community and Forum. In the same way
  check with the support of MapPoint and Forums.

  Streets & Trips
  http://www.Microsoft.com/streets/en-us/default.aspx

  Streets & Trips - help and Support
  http://www.Microsoft.com/streets/en-us/support-and-training.aspx

  Streets and travel community
  http://www.Microsoft.com/streets/en-us/community-and-news.aspx

  Streets and travel Forum
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoiint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  Hello

  As you have bought Age of Empires for Windows OS, you will not be able to install the same copy of Age of Empire Windows version on Mac. However, you can contact the telephone support for confirmation on this issue.

  Here is the link:

  http://support.Microsoft.com/kb/295539

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• Code 45 for zune. Peripheral USB of States is defective; Windows does not recognize it. This is for XP. It has worked before and nine for Christmas. I have all the updates, etc. My Zune software starts whenever I plugged it to my computer.

  That's my XP OS.  He worked before that date and a new Zune for Christmas, a couple of days.  I have all the updates, etc.  My Zune software starts whenever I plugged it to my computer; now all I get is the error above.
  The zune turn on when connected load, and the system can't recognize not like before.  After troubleshooting, I actually uninstalled the usb and the reinstalled system but said that there is a problem.
  Help!

  Hi, Jason and thanks for your response.  Unfortunately, this was not correct.
  After several tests, including two restarts then stop / restart, I just gave up and let it go... and then, the next day, I retried it, and it worked! I don't really know why, but I have a feeling. While I was working with my zune by itself, I went to albums, shuffle all and then my Zune completely erased, restarted and then played as usual. I think that this reboot of my Zune has helped my system to detect.  What do you think?  Also, I can do the same thing somehow - do a "reboot/reset" my Zune?  In any case, my Zune works perfectly, I really loved and added additional music to today and bought a warranty last night.

• I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

  I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon. Mick Murphy - Microsoft partner