Photosmart C309a: Photosmart C309a not scan with Windows 8

I can't get my scanner to work on one of my computers have Windows 8 - it works perfectly on my desktop with Windows 7.  Is this a compatibility issue or I do something wrong?

It worked! Thank you very much!

Tags: HP Printers

Similar Questions

  • My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

    My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

    Hello

    Is the printer connected to your PC by USB or network?

    Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

    Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

    Kind regards

    Shlomi

  • Canon MP250 will not scan with Windows 7. 2,155,2 error code

    Canon MP250 will not scan with Windows 7. 2,155,2 error code

    This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

    This is the message that comes with the 2,155,2 Error Code:

    Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

    They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

    Also, I get the following message when I plug in the printer:

    USB device not recognized.

    It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

    Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

    Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

    I tried to install the updated driver manually, because Windows does not find a driver for this printer.

    It drives me crazy, slowly. Can anyone help?

    Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

    Instead, please answer your original on the subject (this one) thread.

    It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

    @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

    Thank you.

  • Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

    HP Photosmart c4580

    8 64-bit Windows

    My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

    I can print throw my wi - fi connection, but I can't scan.

    If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

    I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

    Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

    What can I do to scan using my wifi connection and installation of HP Solution Center

    Thank you

    Everything is ok now with the new drivers.

    Thank you

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

  • psc2355p: psc2355 does not scan with Windows 7

    My printer worked fine with Windows XP for a few years. I migrated to Windows 7 and installed my printer. Prints very well. However, it analyzes any more. When you press the "Scan" button it request additional software. I can't find that anywhere on this site of HP.

    Who can help out me?

    Hello again connyveer,

    The programs you listed can stay installed on the computer. They are no trouble to the printer, but they are programs that deal with your computer.

    You will not have a scanner software due to the fact that the pilot and the full functionality of the software package is not available for this printer.

    I have a possible solution to the problem at hand.  Please click on the following link on how to scan from Windows 7 without HP for HP Multifunction printers software.

    Let me know if this information is useful or not.

    Thanks again for your time.

    See you soon,.

  • Can not scan with windows 8

    Recently installed WIN 8 - followed all directions for using windows fax and scan and challenging HP scan and capture on all-in-one HP J4680. They return all two 'impossible to find the device"type messages. Printer works fine print and is online as a printer default wifi and scanned fine with win 7.

    Hi rigary,

    I want to help you scan from our Windows 8 operating system. Please first start by printing HP and the Scan doctor.

    HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems. HP recommends that you run the tool every time that you need to solve a problem.

    Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:

  • V525w printer not scan with Windows 8.1

    To set up a new Inspiron 17 (5000 series) running Windows 8.1 (64-bit) and it has detected my printer all-in-one of V525w (via USB) and it prints well, but it won't scan. Dell printer host tells me to install drivers to scan to.  I have installed all drivers for this printer several times and I still get the same result - I can't scan.  Someone at - it link to install only the driver for scanning or know how I can fix this?  Thank you!

    Solved!  Don't know how this happens, but after I installed the driver package, a Scan icon appeared in my apps list that works.  So, I can't scan by opening printer Dell or by clicking home on via Control Panel of devices & printers, but I can scan successfully opening the scanning application.

  • HP Photosmart D110 printer will not install with Windows Vista?

    HP Photosmart D110 printer will not install with Windows Vista?

    Hello

    (1) what happens when you try to install the printer?

    (2) you get an error message?

    Method 1: You can run the fixit available in the link below and check to see if that makes a difference

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    You might want to know

    Add or remove a printer

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

    Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

    Hello

    HP Photosmart 7345 is compatible with Windows 7.

    Download the drivers for your printer from the below mentioned link and check if it helps.

    http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997


    Contact HP support for further assistance.
    http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  • HP Photosmart E317 is compatible with Windows 7?

    HP Photosmart E317 is compatible with Windows 7? How to download pictures from the camera?

    Hello

    Using the memory card on your camera or only the internal memory?

    (a) memory card: out the card and put the computer card reader, he'll end up as a drive and you can copy photos nearby.

    (b) for memory internal: you can use the USB cable provided with the camera, but it can not be found in Windows 7. One option is to buy a memory card, move pictures from the memory on the card to it and again to (a) above.

    http://h10032.www1.HP.com/CTG/manual/c00492399.PDF

    Kind regards.

  • HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

    I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

    Hi @Sajapand @ddegan

    I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

    Most of the products have updated software available on the HP support Web site for Windows 10.

    I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

    HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

    Do you know if you are able to scan using paint?

    To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

    (This is the same for Windows 10, of what I said)

    1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
    2. Click on the painting in the results.
    3. Click fileand then click on from a scanner or camera.
    4. Select your printer, click OK, and then click Scan.

    Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • My Scanner for Canon DR - 2080C is not compatible with Windows 7

    My Canon DR document scanner - 2080C is not supported by Windows 7 64.bit, any solution to this?

    Hi PaalBucher,

    According to the Microsoft Windows 7 Compatibility Center, the scanner is not compatible with Windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    There are also no drivers for the scanner on the Canon Web site.

    I suggest that you contact Canon support for more information about compatibility scan under Windows 7.

    http://www.USA.Canon.com/Cusa/support

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

Maybe you are looking for