V525w printer not scan with Windows 8.1

Similar Questions

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• psc2355p: psc2355 does not scan with Windows 7

  My printer worked fine with Windows XP for a few years. I migrated to Windows 7 and installed my printer. Prints very well. However, it analyzes any more. When you press the "Scan" button it request additional software. I can't find that anywhere on this site of HP.

  Who can help out me?

  Hello again connyveer,

  The programs you listed can stay installed on the computer. They are no trouble to the printer, but they are programs that deal with your computer.

  You will not have a scanner software due to the fact that the pilot and the full functionality of the software package is not available for this printer.

  I have a possible solution to the problem at hand.  Please click on the following link on how to scan from Windows 7 without HP for HP Multifunction printers software.

  Let me know if this information is useful or not.

  Thanks again for your time.

  See you soon,.

• Can not scan with windows 8

  Recently installed WIN 8 - followed all directions for using windows fax and scan and challenging HP scan and capture on all-in-one HP J4680. They return all two 'impossible to find the device"type messages. Printer works fine print and is online as a printer default wifi and scanned fine with win 7.

  Hi rigary,

  I want to help you scan from our Windows 8 operating system. Please first start by printing HP and the Scan doctor.

  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems. HP recommends that you run the tool every time that you need to solve a problem.

  Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:

• printer not compatible with Windows 7

  Plug-in Windows 7. I have a Dell 720 printer that I want to install; but on me not said that it is compatible with Windows 7.

  I saw in the forum that there is possiblilte to counter this problem, but I would like to know how to do.
  Thanks for helping me.
  Marguerite

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

   

  Hello

  You have asked your question in the English version of the Microsoft Community. Please, you would click on the 'Change Region' button down to the left of the screen and then to your preferred language. Now ask you question again.

  Thank you.

• Photosmart C309a: Photosmart C309a not scan with Windows 8

  I can't get my scanner to work on one of my computers have Windows 8 - it works perfectly on my desktop with Windows 7.  Is this a compatibility issue or I do something wrong?

  It worked! Thank you very much!

• Printer not scan with the recent upgrade of Mac.

  I upgraded my Mac OSX to 10.6.8 and now my HP PSC 1410 don't scan. I downloaded the Mac OSXupdcombo and the HPPrinterDriver2.16.1.dmg, installed and rebooted, but still does not work. Do I need to uninstall the printer? I don't want to lose the print capabilities in order to restore the scanner.

  Hello thepotter,

  Welcome to the HP Forums!

  I understand that you are unable to scan a document after upgrading your Mac computer. I will do my best to help you! Please follow these steps:

  Make sure that all the Apple updates are made on your computer. Please follow this document Apple here to help you. Then, try to repair disk permissions by following this document Apple here.

  Once you complete these steps, please try to scan a document. If you are unable to scan a document, then I would recommend uninstalling the software. Please follow this HP document uninstalling the software of the printer. (Remove the USB cable from the computer at this point.)

  Now, install the full features on the site of HP software here. Please post your results, I'll be looking forward to hear from you.

  Have a good night!

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• HP 4500 Wireless Office Jet will not scan in windows 8

  My hp 4500 wireless all in one works with my Vista computer, but will not scan with my new windows 8.

  Hi Daddd,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. On desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-109545-1&CC=US&DLC=en&LC=en&os=4132&Product=3986399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. on desktop applications do a right-click of the mouse and select applications. In the application run, type %temp% .

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run Disk Cleanup by pressing the Windows and R key at the same time back the term calls and Type cleanmgr.exe and press to enter.  Select all the boxes and all delete. Click on the link below about this tool and no disclaimer.

  http://Windows.Microsoft.com/en-us/Windows-8/delete-files-disk-cleanup

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• DeskJet f4500: deskjet f4500 not compactable with windows 7 pro 64-bit

  Hi there, I have a hp f4500 printer I am trying to install the software and drivers for my printer I have a desktop running windows 7 64 bit pro hp computer I went hp to download but it say I not compactable with my o/s all help please

  Hello

  The printer is compatible with Windows 7 64 bit.

  You can download the software from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-73705-3&cc=us&DLC=en&LC=en&OS=4063&productOid=3944756&sw_lang=&product=3944758

  If you install the printer through the USB port, make sure that you do not connect USB until installation guide you to do.

  Shlomi