Photosmart C7280 fax connection

Similar Questions

• Photosmart C7280 network connection failed in Setup

  I get a "error can not connect to the network. I'm trying to set this printer at an Airport Extreme wireless network using WPA/WPA2 encryption but not luck...

  What should I do? I retried the network name and password several times. This printer works with a WPA encryption?

  I have it. Found another suggestion to fix using power off the power after the reset of the plant network. Then wait 30 seconds, and then hold down the # 6 buttons and power back on. The network it no problem.

• Photosmart c7280

  Can the photosmart c7280 fax machine telephone number be a phone mobile number and used through bluetooth to send faxes?

  No, the fax cannot be a cell phone. He must have a line going directly to a fixed phone number. It can also use bluetooth to send faxes, sorry.

• Photosmart C7280: question of installation on fax to PC with answering machine on the same phone line

  I have an answering machine on the phone line that would be used for incoming faxes. The guidance address how fax to PC using the phone line at all. How do you put up? Do you need a distinctive number of the ring, or you can use the same phone number as the fixed line? The answering machine will pick up faxes?

  Hi @MSS1,

  Thank you for reaching out to the forums! I understand that you are having problems of fax. I'd love to help you.

  It's not like you can fax it to the PC with the software for this model. You would have to send and receive faxes from the printer.

  This document provides steps for not being able to fax and it also provides information for the connection to the fax: can't send or receive faxes. Do not take into account the title.

  I have provided the user manual of the printer to set up the fax, beginning on page 62: Photosmart C7280.

  Here is a document to receive faxes: receipt of the Fax.

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• How to receive faxes in the folder (HP Photosmart C7280)? Help, please!

  Hello

  I want to receive faxes to a folder instead of printing as faxes come. I am operating Windows XP with my HP Photosmart C7280 all-in-one. I have impression seems a lot, just that the ink runs faster in this economy!

  Thanks for any help!

  TP1

  Hello

  Photosmart C7280 does not support save incoming faxes on PC. However, there are other printers supporting it as HP OJ Pro 8500 series, HP OJ 6500 series, HP OJ 4500 series. Check the specs on the HP Site and to buy the printer that meets your requirements.

• C7280: Fax function disable

  My printer is connected to a telephone system which has an answering machine and an alarm system connected to it. The fax function can be set to 6 rings that are likely to interfere with the answering machine and/or alarm system. Since I almost never send or receive a fax these days - which? -I would like to disable fax altogether, but cannot find a way to do it.

  I would like to hear from anyone who knows the answer.

  Hi @mikep6dd,

  Welcome to the HP Forums!

  I understand you're wondering how to disable the fax with your HP Photosmart c7280 printer function. I'm happy to help you!

  All you have to do to turn this feature off is to unplug the Jack at the back of the printer. There are no other parameters that need to be changed.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

  Hello

  I installed Mac OS sierra

  Since then, my HP Photosmart C7280 scanner is not longer detected:

  • In the system preferences tab scan
  • Image transfer can not find any device

  I reinstalled the device

  Print shops

  Scanner is connected to the router (Hello) by Eternet

  Scanner still works when you use a Windows 10

  MacBook Pro (retina, 13 inches, end 2012)

  macOS Sierra Version 10.12 (French)

  Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

  Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

  What OS did you go to?

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• Photosmart C7280 stopped wireless

  My Photosmart C7280 has recently stopped working wireless.  I have run the tool diagnoses the printer and was able to print when connected by USB, but whenever I try to print wireless, nothing is going on - I have tried two tools (HP Solution Center AND HP Network Diagnostic Tools) say that it is not connected.

  When I 'ping' (I know that the IP address) of the screen "cmd" on Windows it is said that he can find it. When I look at my manager wireless BT Hub screen we can see it, but every time I try to print it expires always say that it is impossible to find the printer or it is not connected.

  When I run the HP Network printer setup report, he said that everything is fine, then why can't find it-someone ' a please help!  I spent most of the holiday, try to address this issue!

  I have a Sony Windows XP (SP3) laptop, my wife has a Dell laptop with the same configuration, and none of them are wireless printing.  My thoughts are that maybe the wireless card is spent in the printer?  Does / can happen, and what is the answer?

  Thank you.

  Andy

  Print a network Test Wireless at the front of the printer.  It will be automatic card test wireless in the printer.

  Then, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on ' apply

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will need to remove the printer in Control Panel > printers and redo "add a printer" using the new IP address.

• Photosmart c7280 will not keep Wi - Fi. said the radio but the radio works failed. repairable

  HP photosmart c7280 wireless printer has been working and connected to the router. Stop printing. The test report under collar "Radio on", according to Radio wireless working' fail. Is - fixable? The printer is only used wireless and not as part of a networked system.

  I thank very you much for your help and confirmation. I certainly could have been more specific about the problem and what I did. It was my first time, and you were very understanding.

  Thank you once again

  Sandy

• Photosmart C7280 all-in-One Wireless does not

  My wireless printing worked great with my Photosmart C7280 at least a year or more and now recently the wireless side no longer works. My Apple (iPad and Macbook) devices has ceased to recognize my printer. Even when I tried to add via IP address, it should not.

  My printer works fine when hard cable through my PC and Macbook via USB.

  I tried to reset the settings of my network to restore default network printer and adding in my SSID and password. It shows that it is connected. But when I run a Test Page wireless network of in the settings of the printer, it shows everything going on and the signal strength is excellent. However, the final diagnosis in the summary says 'No' to "other networks detected matching your network name (SSID)" so I wonder if my printer actually properly connect my network? Since I have other wireless devices connected to the same SSID.

  I turned other devices and the printer off, and then to restart. I turned and turn on the radio wireless settings of the printer.

  Another thing I want to mention is that before I deleted the printers in my Apple devices, they still show my Photosmart 7200 series, but said they were inactive.

  Also when I was able to enter my Verizon FIOS Broadband Router management software via my browser, it showed all my wireless devices, but it also showed my Photosmart as being inactive wireless, where other devices that were on at the time were connected.

  I wonder if it may have been a recent update from Apple that may have caused this problem? However the Verizon Fios also showed the printer as being inactive, so I think not?

  I have worked on this issue for the days and spent a ton of time so far, any suggestions to solve this problem would be greatly appreciated.

  I'm about to intermediate level to understand the technical aspects. So please clarify responses to resolution steps very simply in your response.

  Honestly, the routers ISP-issued are very problematic.  Restart the Westell pulling on her momentarily just power cable before attempting to connect the printer.

• Impression of failure of communication with Mac Mountain Lion and Photosmart c7280

  I have flowed through many messages about the printing and problems of Mountain Lion (10.8.3) faults and cannot get the answer I need.  I use this printer (HP Photosmart c7280) very well with the Lion of mountain for several months now and just recently have had problems printing.  I can scan very well, but printing is another story.  I deleted the printer, re-installed, restarted, unplugged, replugged, reset the printing system, deleted and reinstalled the drivers, ad nauseam!  I don't know what the problem is.  I am connected with a USB cable.  I send a print job, it can get 30 to 67% of the way sent and start printing and then I get this error: failure to communicate: the computer is therefore more able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.
  Check the printer to find errors.

  I just tried to install the new driver and new hpprinterdrivers2.14 and they used to install.

  Today, I can't get more than one or two lines to print before it stops.  I don't know what else to try.  Help, please!

  Hello

  First make sure that the material can print without problems by printing a test page:

  http://support.HP.com/us-en/document/c01448018

  In addition, have you tried plugging the USB stick on another free port of your Mac?

  Be sure to use a USB 2.0 standard, not longer than 2 m long cable.

  Make sure it is directly connecting to your Mac and not through a USB extention or a hub port on an Apple keyboard, which is not powered.

  So I recommend you try a different USB cable, then check any change.

• Problem of compatibility printer PhotoSmart C7280 with Mac OS 10.7 (lion)

  my printer hp photosmart c7280 all-in-one will work with the new mac os 10.7 (Lion)?

  Hello

  If your HP Officejet 6500 has worked very well with 10.6, after that upgrade to the HP software Lion should continue its work, there is no need of updated drivers.   Have you tried that?

  second - if you have updated to Lion and removed the HP software before, make sure that the printer is turned on and connected to the Mac (usb or network), a few "Add printer" and go through the steps, the Mac check Apple software updates and download the latest driver HP for you.

  Hope this helps

• HP Expert day - error installing printer Photosmart Premium Fax c410a e - AIO

  I have Photosmart Premium Fax c410a printer e - AIO. The printer is connected to my wireless network. I have correctly set up HP eprint and Google Cloud print and can't seem to send documents directly to the printer. I installed HPeprint applications and order of HP printer on my iphone and they connect to the c410 are not able to print. The control printer also analyzes the app, copies and capture page.

  My problem is to install the software of the printer on my laptop running Windows 7 32 bit. I tried to load drivers and software from the CD and HP site, but always get fatal error 3/4 by the intermediary and the restoration. I tried to install base drivers and a complete software package with the same result.  They have a PinternControl for Windows?  It requires no drivers and wireless. Here is a screenshot of the details of the error message.

  

  Hi gfountaine,

  Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.

  This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.

  1. Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
  2. Click on the Control Panel menu option.
  3. When Control Panel opens, you will see a screen similar to Figure 1 below.
     
     Figure 1. Windows 7 Control Panel