PHP variable loads on _root TEXT, need to put on a MC

Similar Questions

• variables php correctly loaded in flash and poster DEFY the If - then statements

  path = "http://localhost/xampp/nwjv/php/"; 
   
  //declare path to php files 
  lvOut = new LoadVars();     //create lv object sending variables OUT to php 
  lvIn = new LoadVars(); //create lv object receiving variables IN from php  
   
  lvIn.onLoad = function (success) {
  if(success) 
  { 
       //PHP variable value to textbox  
   
       InVal = lvIn.returnVal; 
       InTxt = lvIn.retVal;  
   
       output.text = InVal; 
       output1.text = InTxt;  
       
       /*  
      output1.text = "No Value";  
       if(InTxt == 'lo' ) { output1.text = "Low Value"; }  
       if(InTxt == 'hi') { output1.text = "High Value"; } 
        */
   } else { //...or notify of failure output.text = "fail"; } 
  }  
   
  
  
   myBtn.onRelease = function()
    { 
        //assign user-input value to lv property called years 
       lvOut.years = years.text; //send to a blank window // 
       lvOut.send(path + "dogyears_new1.php",lvIn,"GET"); 
       lvOut.sendAndLoad(path + "dogyears_new1.php",lvIn,"GET"); 
   };
  

  And simple PHP code

  PHP code:

  <?php$calculation = $_GET["years"]*2;
if($calculation <=10 ) $retVal="lo";
if($calculation > 10)  $retVal="hi";
echo "&returnVal=$calculation &retVal=$retVal" ;?>

  PHP returns two values that are perceived by the flash in InVal and InTxt variables. The collected values are correct and are thus displayed in boxes of 2 outputs. If the value in the input box is 5 or less, the outbox1.text shows "lo" and if the entrance area is greater than 5 the output1.text shows 'hi. '

  Now, if yew commented then block in the code is activated by removing the / * / of all about him and the program is run, the If Then block fails because the comparison of the InTxt fails.  SO even if the value of InTxt is "hi" or "lo" as seen on the 1st round, but the value does not change to the 'Value' but high 'low value' according to the value of InTxt in the If Then comparison bloac.

  


  It has completely failed me why this is happening. While I can see the values correctly, I can't use it in conditional loops. I even tried the instructions box switch with the same frustrating result. (The output1.text is equal to 'No value' when it should change to 'High value' or 'Low value')

  Earlier I was using numbers and faulty when I tried to use strings because I thought that for some reason any PHP returns everything as strings. But as can be seen, even the string comparison fails.

  Can someone please comment on this problem and suggest a solution.

  All thanks loads!

  


  PS. I wanted to download the small fla for this but I could not find a way to add a file here. Please suggest if I can do and how and I'll upload my fla for this code. Thank you.


  which is caused by some problems/string number (not in your case), or a white space (probably your situation).

  to confirm that it is the white space, check the length of returned variables to see if they are more than 2.

• shipment value of the PHP variable to Flash to load an xml file

  I would like to load an XML file to the local location or on the server to ignore the name of the file. I use PHP to send the name of the Flash file.

  Here it is the PHP code:

  <? PHP

  filesInDir ('C:\Documents and Settings\457305\My Documents\shrikant\Flash Tutorials\webassist');

  function filesInDir ($tdir)

  {

  $dirs = rewinddir(3) ($tdir);

  foreach ($dirs as $file)

  {

  If (($file == '.') |) ($file == '..'))

  {

  }

  else if (is_dir ($tdir. » /'. $file))

  {

  filesInDir ($tdir. » /'. $file);

  }

  on the other

  {

  echo "fileName = $file";

  }

  }

  }

  ? >

  And here is the Actionscript code loading:

  import flash.net.URLLoader;

  import flash.net.URLRequest;

  import flash.events.Event;

  to import flash.net.URLVariables;

  Stop();

  Set the PHP file to load

  var phpFile:String = " " http://localhost/WebAssist/test.php ";

  var cons_xml:XML;

  var xmlLoader:URLLoader = new URLLoader();

  Specify the property dataFormat of the URLLoader to be "VARIABLE".

  This ensures the variables loaded into Flash with the same variable names

  xmlLoader.dataFormat = pouvez;

  xmlLoader.load (new URLRequest (phpFile));

  xmlLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(evt:Event):void

  {

  trace (evt. Target.Data.FileName);

  cons_xml = new XML (evt.target.data.fileName);

  gotoAndPlay (2);

  }

  When I trace evt.target.data it displays "fileName = mainOpenEndedXML % 2Exml" and when I trace evt.target.data.fileName the file name is correctly displayed as 'mainOpenEndedXML.xml'.

  But in the two next lines where the loading is done that it does not load the file IE does not play the SWF to an xml file.

  I've searched the Internet to find answers, but not able to find solutions.

  Loading works fine if I insert the xml file directly in the code and the SWF in the XML file plays correctly. Here it is the code for the same thing:

  import flash.net.URLLoader;

  import flash.net.URLRequest;

  import flash.events.Event;

  to import flash.net.URLVariables;

  Stop();

  var cons_xml:XML;

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.load (new URLRequest ("mainOpenEndedXML.xml"));

  xmlLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(evt:Event):void

  {

  cons_xml = new XML (evt.target.data);

  gotoAndPlay (2);

  }

  Any help on this would be greatly appreciated

  
  

  You said you use PHP to send the name of the Flash file.  If the php file you provide only the name of the xml file that you need to load, then you will have to load the xml file in the same way that you show in your last set of code where you say that load you it directly.

• Load an external Php variable in Actionscript in flex.

  Hello

  I have be trying to load an external variable from a php file in an actionscript variable.i know how to bind the php mysql data to datagrid but not what I'm looking for, example say a php variable has a value = 5, this value will be passed to a variable limit actionscript, so now limit will have the value 5.

  I use flex 3 and I have tried many examples listed on google, I went through all the tutorials, codes, etc... all of them were made using cs3 or cs4. And when I ran get them I have strength any output at all. Either I myself am thatproperty charger was not defined or nothing in my textarea.

  If possible please guide me on the next or even want to give a small sample that works on flex3.i am also unsure of what I shud write in my php file.

  I added the code to my mxml file for what does not work and shows me a blank text box.

  Any help would be appreciated... Thanks in advance

  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Application xmlns:mx = "httw://www.adobe.com/2006/mxml" xmlns:custom = "" test.external. * "layout ="absolute"initialize =" load() ">"
  < mx:Script >
  <! [CDATA]
  
  private function load(): void {}
  var loader: URLLoader = new URLLoader();
  loader.addEventListener (Event.COMPLETE, onComplete);
  Loader.Load (new URLRequest (https://localhost/external.php));
  }
  
  private void onComplete(e:Event):void {}
  Ext. Text = URLLoader (e.target) .data;
  }

  
  
  []] >
  < / mx:Script >
  < mx:TextArea id = "ext" x = "296" y = "199" >

  
  < / mx:TextArea >
  < mx:Button click = "load()" x = "343,5" y = "274" > "
  
  < / mx:Button >
  < / mx:Application >

  
  

  Your service works when she is called in the browser?

  C

• is it possible to load and send php variables at the same time?

  Hello, with this line:
  Request.Method = URLRequestMethod.GET; You can get php variables.
  and with request.method = URLRequestMethod.POST you can send variables.
  
  But is it possible to do this at the same time?
  
  
  

  they send and receive data in order. IE, data are sent (if there are any) and then the data is received (if there is).

• reception and display of php variables

  Hello

  trying to get php variables and arrange them in a list of the best scores, but I can't see the items.

  all the elements that I display in a text box, but I want to separate them into ten

  I have text fields nickname (user name) 1, 2, 3, 4, 5, etc.

  and mark fields of text (username) 1, 2, 3, 4, 5, etc.

  Here is my code... When I trace

  var currentPseudo:String = "highScoresPage.pseudo" + p;

  or

  var currentScore:String = "highScoresPage.score" + p;

  I get the correct output but when I try to add [currentPseudo] or [currentScore] into the equation, it doesn't seem to let me and if I remove the full stop after each text appendText is bluer and the function will fail? I thought it was the correct syntax for this sort of thing (without the full stop)?

  This isn't my code which is no doubt why it's confusing to me... Help, please!

  function modeComplet() {}
  trace ("loaded variables");
  
  highScoresPage.pseudo1.text = "";
  highScoresPage.score1.text = "";

  
  for (var p:uint = 1; p < = 10; p ++) {}
  
  var currentPseudo:String = "highScoresPage.pseudo" + p;
  var currentScore:String = "highScoresPage.score" + p;
  trace (currentPseudo);
  
  If (URLload.data ["Nick' + p]) {}
  [currentPseudo] .appendText (URLload.data ["nickname" + p]);
  If (URLload.data ["score" + p]) {}
  [currentScore] .appendText (["score" + p] URLload.data + "\n");
  } else {}
  [currentPseudo] .appendText ("\n");
  [currentScore] .appendText ("\n");
  }
  }

  }

  Hello

  You don't have to use the point to access the properties and methods of the object. The problem with your code, it's that you are not referencing the object whose children you are trying to access with the hooks. Try to add all of your references to hook with the object containing the text fields.

  For example, instead of:

  [currentPseudo] .appendText (URLload.data ["nickname" + p]);

  use

  This [currentPseudo]. AppendText (URLload.Data ["Nickname" + p]);

  I guess the text fields are in the same place where is the code. If it isn't, you ave to use the full object reference (for example, this.container [...]).

  I hope this helps.

  Rui

• I can't read my emails or spam, to try to send it, I get the error message 'Unable to load the rich text editor', enamel works with Google, ok, how can I solve this problem in Firefox?

  Error message for Virgin Gmail

  "Unable to load the rich text editor.

  What is the solution?

  You can see https://support.mozilla.com/questions/896294
  and look at this thread, the only real connection so far is it is very recent and it involves blank e-mail.

  Those who are in this thread say blank incoming emails doesn't work except if they Disable Adblock Plus from the icon of ADP.

  In fact, the rich text editor would be in a separate file, there is most likely a connection to ADP because some of these files may be blocked. I used to have a lot of problem in this forum on the web and the tools were blocked (didn't really need them) just because I block a lot of things here: like animals to fur in nurse uniforms, a trash can (toolkit) and that blue area at the bottom of this page that interferes with scrolling and the use of the key 'end '.

  Something seems to be wrong with your profile, clicking on it does not bring it upwards.

• problem with the chain (from database) to the php variable

  This will probably be an easy question for some of you, but I'm having a problem to assign a string to a php variable. I have several RSS feeds stored in a database. the stored information includes the RSS feed name, link to the actual site, link for just the RSS feeds for the site, etc...

  I'm running a / loop to generate the RSS feed. the result is simply the title of the site and the last 8 articles of the site. everything came out fine, with regard to the actual display and the title of the rss feeds showing upward, but I can't plug the RSS feed link without getting an error. This is the code I'm using (is all the code, but it's the only part that gives me bad):

  <? PHP include('RSS/rss_fetch.inc');

  $rss = fetch_rss ('RSS feed link goes here');
  table shows 8 results
  $items = array_slice ($rss-> points, 0, 8);
  Scroll through each element and echo
  foreach ($items as $item)

  
  {? >}

  the bold line is the only place where I am running into a problem. I have the correct rss feed link stored in the database. I would reference him in my code

  <? PHP echo $row_resourceFeed_rs ['rssLink'];? >

  However, if I replace the current link (the one in bold above) by the php in the database call, I get an error. can someone tell me please how to extract the link RSS feeds on the line in bold?

  mathruD wrote:

  $rss = fetch_rss ("");

  You cannot nest tags PHP inside a block of PHP code.

  The following should be all you need:

  $rss = fetch_rss($row_resourceFeed_rs['resource_rssLink']);
  

• Loads PHP vars loading cache

  Hello

  I have a program that loads the PHP variables.  At the end of the day, I will be responsible for producing the PHP but I have to be sure that the flash load variables.  In my own tests using a simple PHP file, once the variables are laoded, subsequent changes to the variables don't have not recorded until I cleared my cahce.  I was leading these test on my local server so maybe that is not a question online.

  But if anyone has any knowledge about this or knows how to make sure new variables are loaded each time the flash application to load PHP, I'd be gateful for the information.

  Best,

  Chris

  If you asssign a random variable to the url string for the php file it does not load the cache... something like...

  var fileToLoad: String ="http://www.domain.com/yourData.php?nocache=" + Math.Random ();

• Load multiple dynamic text files in different settings Maintimeline

  Hello!

  I managed to load an external text in one place a file the maintimeline. I would do the same on other bases. When I go to reproduce the same thing I did on first one I receive an textReq request duplicate. I have to give the textReq a more specific name for each section? When I did the film would not yet recognize and code that worked before.

  Can someone help me with this code? Thanks in advance

  I am attaching the link so you can see what I'm talking about. You will also notice that the swf file, I have loaded will not go away. It is another problem... ugh.

  Here is the link:

  http://www.sandraschmitt.com/Coclico/index100.html

  Here is the code on the maintimeline:

  Stop();

  Fl.transitions import. *;
  Fl.transitions.easing import. *;

  import flash.net.URLRequest;
  import flash.display.Loader;
  import flash.events.Event;
  to import flash.events.ProgressEvent;

  function startLoad() {}
  var swfLoader:Loader = new Loader();
  var swfRequest:URLRequest = new URLRequest ("endlessCoclico3.swf");
  swfLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onCompleteHandler);
  swfLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, onProgressHandler);
  swfLoader.load (swfRequest);
  }

  function onCompleteHandler(loadEvent:Event) {}
  addChild (loadEvent.currentTarget.content);
  }
  function onProgressHandler(swfProgress:ProgressEvent) {}
  var p: Number = swfProgress.bytesLoaded/swfProgress.bytesTotal;
  trace (percent);
  }
  startLoad();

  handle events for the buttons...
  collections.addEventListener (MouseEvent.CLICK, clickSection);
  raison.addEventListener (MouseEvent.CLICK, clickSection);
  stores.addEventListener (MouseEvent.CLICK, clickSection);
  news.addEventListener (MouseEvent.CLICK, clickSection);
  contact.addEventListener (MouseEvent.CLICK, clickSection);
  home.addEventListener (MouseEvent.CLICK, clickSection);

  
  function clickSection(evtObj:MouseEvent) {}
  trace shows what is happening... in the output window
  trace ("the" + evtObj.target.name + "button was clicked!");
  Go to the clicked section on...
  gotoAndStop (evtObj.target.name);
  }

  
  

  Here is the code on the real framework where dynamic text works:

  Exteranl loaded text fields
  var textLoader:URLLoader = new URLLoader();
  var textReq:URLRequest = new URLRequest ("text_philosophy.txt");

  function textLoaded(event:Event):void {}
  philosophy_txt. Text = textLoader.data;
  }

  textLoader.load (textReq);
  textLoader.addEventListener (Event.COMPLETE, textLoaded);

  TextFields: what I wanted to do, mainly for peace of mind, is to have a layer that I dedicate to actionscript which only has the code frame 1 but it extends along the timeline so that the code is available for each image on any other layer.  In this context, I put the variables and functions that can get used/shared everywhere where they happen be necessary.  I have the habit of creating separate from the other layer for types of actions of actionscript... the stuff that happens at the level of the local framework, like stop(); or as the assignment of a variable a new value, etc... local things to being in this context/location.  So with this in mind

  In frame 1 on my layer shared by all the world, I would probably declare the variable...

  var textReq:URLRequest;

  And when I get to a particular frame where I want to load a new textfield with data, I attribute this value on the layer var local actions...

  textReq = new URLRequest ("text_philosophy.txt");

  with the rest of local implementation concerning the loading of the file, etc...

  ---------------------------------------

  Sovereign funds:

  Yes, pretty much, and it becomes an object who owns a House on the timeline, so if you move away from this framework does not follow the swf file.

• Loading external/dynamic text fields

  I have a recurring problem with my fle flash and it involves add external SWF and dynamic text files.

  Here goes...

  My flash is implemented with 5 sections. Each separate section is composed different maintimeline on frames and labeled. SO, when you click on a section in the navigation bar it tells the movie to access this section labeled on chronology. On each article, there is a space for the external txt file or an external swf. I've done many tutorials on how to load these things and I can actually get them to load when I put the instance of them on the first image with the code of the main action. BUT I still want more in the timeline panel.

  For example... When you click on a section, I put the area of dynamic text on this article which is further down in the timeline panel. When I test the movie I see that the text box there, but there is no text in there. When I put the same text on image 1 box, it works. SO I think it has something to do with the code to find the instance further to the bottom of the timeline.

  I hope this makes sense... I enclose my code. Any help would be greatly appreciated because I see this as a recurring problem for me in each section.

  Thank you! Sandra

  LINK:

  http://www.sandraschmitt.com/Coclico/index100.html

  CODE:

  Stop();

  
  Exteranl loaded text fields
  var textLoader:URLLoader = new URLLoader();
  var textReq:URLRequest = new URLRequest ("text_philosophy.txt");

  function textLoaded(event:Event):void
  {
  philosophy_txt. Text = textLoader.data;
  }

  textLoader.load (textReq);
  textLoader.addEventListener (Event.COMPLETE, textLoaded);

  
  handle events for the buttons...
  collections.addEventListener (MouseEvent.CLICK, clickSection);
  raison.addEventListener (MouseEvent.CLICK, clickSection);
  stores.addEventListener (MouseEvent.CLICK, clickSection);
  news.addEventListener (MouseEvent.CLICK, clickSection);
  contact.addEventListener (MouseEvent.CLICK, clickSection);
  home.addEventListener (MouseEvent.CLICK, clickSection);

  
  function clickSection(evtObj:MouseEvent) {}
  trace shows what is happening... in the output window
  trace ("the"+ evtObj.target.name + "button was clicked!" ")
  Go to the clicked section on...
  gotoAndStop (evtObj.target.name);
  }

  You must wait until you are on the frame where the textfield must try to assign the text - you can't assign text if it is not present.  You can probably load all the text and saved it as a variable in frame 1, but this variable must be available on the framework where you assign the textfield text charge.

• I have photoshop cs3 on my old laptop - need to put it on the new - was a gift from a business associate - do not have box with me - last need to load on the new laptop series 3

  I have photoshop cs3 on my old laptop - need to put it on the new - was a gift from a business associate - do not have box with me - last need to load on the new laptop series 3 @!

  Hi Talia Casey,

  Please visit the link below to find the serial number and download link:

  https://helpx.Adobe.com/x-productkb/global/find-your-serial-number.html

  https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Concerning

  Sarika

• Store the Javascript variable in a PHP variable

  Hello

  I get comments in a dialog box (using javascript).

  I want the data to be stored in a php variable, so that I can use this php variable in a query update.

  I don't know how to do it.

  Kindly help me.

  <? PHP

  If (isset($_GET['comp_no']))

  {

  $complaint_no = $_GET ['comp_no'];

  ECHO '.

  < script >

  Function myFunction() {}

  person var prompt = (\"Enter your name\",-"John Smith\" "); ».

  $prog_name = "nobody." ;} < /script > ';

  $query2 = "update sys_complaints the checked value = 'Yes', Programmer ="$prog_name" , when sno = '$complaint_no'"; "

  $run_query2 = mysql_query ($query2);

  If ($run_query2)

  {

  echo "< script > alert (" complaint is busy!' ");" < /script > ';

  Header("Location:view_complaints.php");

  }

  on the other

  {

  echo "request failed." mysql_error();

  }

  }

  ? >

  Thanks in advance.

  Use ajax to store a var js in a var to php there is a lot of info online if you are ready to search.

  best,

  Shocker

• XSL and a php variable

  I am looking for a solution to a problem I have with a XSL stylesheet and try to use a php variable. The page that I'm getting is a page to display information based on the year of graduation from a class (I work in a school). For example recent years graduating from the class of 2006.
  
  I have a statement in the XSL sheet which limits the data provided only this year of the class
  < xsl: for-each select = "school [class_of = & apos; [2006 & apos;] ">
  
  I would like to replace that 2006 above with a statement like $classyear php since this page to display the variable data is already present, but I can't make it work. I tried to put php in the XSL and also to change the extention etc and they all make mistakes. I guess that just XSL cannot use variables in it?
  
  Any help would be greatly appreciated. I'd hate to reproduce that one sheet XSL for each year class.
  Thank you
  Chris
  

  David,
  Thank you VERY VERY much for your help.
  It is the strange stil for me that you must call the variable in the page and put it, but have witten by another page. I guess it's a XML thing.
  Thank you once more that you saved me tons of work having to do it by hand.

• Whence ODI stores its values variable if type is text

  Hi all
  
  I've already lost my time of 2 to 3 just try to find "where ODI stores its value for variables if type is text. "SNP_VAR" is certainly not the answer.
  
  I tried one of the following ways:
  
  (1) can't find that no matter what tat column that can contain more than 400 characters in my working repository.
  (2) seek to implement Oracle disk track to discover sql get questions when we hit the Refresh button on the ODI variable. Does anyone know how to trace sqls pilot?
  
  Kind regards
  Amit

  Hi Amit,

  When it's a text variable it is stored in SNP_EXP_TXT in the documents as necessary once the text is 'broken' in blocks of 256 characters long. This means that if the variable has a 700-character text, you will find 3 files to SNP_EXP_TXT.

  This help you?