T61 parts business?

Similar Questions

• T61, Vista Business with Cisco VPN problem since the last update on the Lenovo site.

  Hello

  I use a T61, Vista Business, Cisco VPN Client v.5.0.02.0090.  Since my last update, October 2, 2008 on the Lenovo ThinkVantage Productivity Center site, I can't connect to my VPN Office. It was working perfectly before this software update. The only thing I remember is the update of the driver for Intel 4965AGN card v.12.x. I went to v.11.5 but it's not better.

  When I try to connect, I get the message "secure VPN connection terminated by a peer. "433 reason: (reason unspecified peer). I did a test with 'ping' IP address of the VPN and the response of the address.

  Usually, when the VPN Client is able to make the connection in the network connection window, I see "connection to the network space 2 (the Cisco VPN system map)" enabling / disabling Disable to activate the State. But there in my case, turn it off.

  I can connect with another PC using Windows XP. Thus, the VPN works.

  Any ideas?

  Thank you

  I met a very similar problem with my X61s. I was able to fix this by removing the print reading software for which an update was also installed on 2 Oct. As I barely use the fingerprint reader, it wasn't a problem for me. The Cisco VPN worked never better...

• T61 upgrade to WINDOWS 7

  Hello. I'm considering upgrading our facility T61 Wista Business (32 bit - 2 MB ram) for Windows 7. Having noticed the autonomy increased - what other benefits are? When the upgrade (new installation) x 64 version - I guess we can address up to 8 MB of Ram, or?

  possible to increase the ram up to 8 GB, but it depends on you what t61.

  Please post back the submodel. (like 6377-xxx)

  http://en.Wikipedia.org/wiki/Features_new_to_Windows_7

• The network ID Wizard will not change to "this is a home computer: this isn't a part of a business network!

  When I click on network ID is preset at "computer is part of a business network."

  I want to choose "this is a home computer: is not part of a business network!" that I chose, and then say next and finish, restart the computer

  Just after the restart, he ignored the change and always says 'the computer is part of a business network. "

  I tried this change now on at least 10 occasions but without success.

  Help!

  Hello

  Did you of recent changes made to your computer?

  I suggest you follow the link and check.

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Also I suggest to restart the computer and try to change the network ID and check.

  I also suggest you to follow the link and check.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

• How to setup Windows 7 as a working group that is not part of a business network?

  I have 2 Win 7 Pro systems implemented on a working group that is not part of a domain (on XP it was no problem to set up a home network, not a business network). However, Win 7, although it gives the option under system, network ID properties, joining a domain or a workgroup, it fails to really accept the parameters of working group. After the reboot, it is always default to a Business Network setting. It's very frustrating because security seems to be much more rigorous to manage communication; sharing, etc.

  There must be a solution to this. Someone has the answer to get systems to settle and remain in a workgroup about.

  Thank you

  John

  CopierGuy wrote:

  I have 2 Win 7 Pro systems implemented on a working group that is not part of a domain (on XP it was no problem to set up a home network, not a business network). However, Win 7, although it gives the option under system, network ID properties, joining a domain or a workgroup, it fails to really accept the parameters of working group. After the reboot, it is always default to a Business Network setting. It's very frustrating because security seems to be much more rigorous to manage communication; sharing, etc.

  There must be a solution to this. Someone has the answer to get systems to settle and remain in a workgroup about.

   
  Since then you have only really two choices (workgroup or domain) and to join a domain - servers any must be involved...  I think that there is a lack of communication here.
   
  A "working group" is really - even with all the recent stuff - just a bunch of stand-alone computers with the same name.  John and Jane Smith Mikey - for example.  It can * help * simplify some shares in all areas of resources, but is not as a true area - where they share not only the same name - but many of the underlying parameters is pushed down by a central control entity (server).
   
  So - let's make sure that you are talking about the same thing that you seem to believe that you are.
   
  In the desktop menu or start - right click on "Computer" and choose "Properties".  This should open this folder: 'configuration\systeme and Security\System control. "  -"Computer name, domain and workgroup settings" should be things foure - please list those in response to this announcement.
   
  You can even JOIN a domain with a server being involved and demand - if...
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• HP nc6400 Business Notebook: adding RAM nc6400 and part numbers

  Vista Home Basic 32-bit SP2

  Dear friends, hope that your door!

  I have a HP nc6400 and I would go from 1.5 GB RAM.

  I understand that I can install as much as 4GBs? Let's just say I have add 1 GB or 2 GB how much improvement
  If I could hope?

  I don't want to spend a lot of money with a thisage computer, BUT I know that she will behave better with more RAM.

  Will I need to make changes by adding more RAM?

  Finally, what are the part numbers for the 1 GB and 2 GB memory expansion sticks?

  I would ask the HP numbers for these upgrades of RAM that I couldn't find them anywhere

  Any help or suggestions are greatly appreciated.
  Sincerely, Ralph

  Hi, Ralph:

  At that time, the standard was 1 GB under the keyboard.

  No doubt if a customer wanted to have the phone set to 2 x 2 GB, they would have paid a huge premium for this option.

  Today, with fancy Web page and operating systems graphics devours more memory, 1 GB is next to useless.

• Component of Oracle in Oracle E-business Suite 12.1.3 service parts planning

  Hello

  We bought the license for the "Oracle Service parts planning" component.

  I know not how to save this component, as it appears under "module of Supply Chain Management when I connect to the application as"sysadmin"and call the License Manager."

  Home-> license component License Manager applications-> expand all-> supply chain planning-> SPARE PARTS planning.

  After that I recorded this component, The questions I have are;

  
  

  (1) how do I know which patch to download and apply in order to install the component?

  (2) is there an easy way to find the required patch?

  (3) has anyone installed the component before? If Yes please give me the patch number.

  
  

  Here are the details of the application E-bus configuration

  
  

  Apps level o/s: Red Hat Enterprise Linux 5.0 x 86-64

  Apps Version: 12.1.3

  DB OS level: HP - UX Itanium (IA64) 11.31
  

  Oracle Version: 10.2.0.5.0

  
  

  Any help would be much appreciated.

  
  

  Thank you

  
  

  Anna S
  

  
  

  Rambour,

  Your interpretation is correct and there is nothing else to do.

  I believe that the answers to your questions in the email that I received from you?

  Thank you

  Hussein

• Part of the internal keyboard of the T61 6460-DVU model number

  
  
  

• The T61 hidden Partition files

  I'm working on a T61 that took the original OS (maybe Vista Business?) removed and replaced by the installation of Windows 7.

  The "hidden partition" is still there and 'healthy', taking about 4.5 GB... Although I've never seen the F11 restore message. The blue button only interrupt the boot process to enter the bios or to choose a boot device.

  We no longer have access to the recovery discs or a way to create them... and I wonder if they can be created from the files on the hidden partition is?

  I found Paragon Backup & Recovery Free edition Advanced lets you modify a partition 'type', and then you can use the computer management, storage, Windows' disks to assign a drive letter.  I did this to display and make a backup of the files on the partition hidden... so now I also wonder if these files can be useful if I simply copy the partition on a DVD, as they should just adapt... could be bootable?

  I found the Rescue and Recovery "repair" of online files to create the floppy or the CD (for Vista/XP) to possibly fix for a missing F11, but there is also a much larger repair (?) of Rescue and Recovery (4.3) for Windows 7.  I wonder if I should run as.

  Finally, there is a ThinkPad Updater for Windows 7 upgrades... I saved just install Windows 7, and I'm about to run updates the Updater found, that some software will restore specific ThinkPad, I hope... for upgrades to Windows 7, apparently.  Win7 works a lot on the T61.

  Any thoughts on the above? " s ?

  Where can I buy the rescue/recovery disc for this machine?

  .

  You can always buy Lenovo recovery disks. You can call IBM parts. The options on their phone system has changed, but the last time that I called, it was 1-800-388-7080 option 2 then option 2. You will need your complete model and serial number. They will only sell you the operating system that was initially authorized. Try to hit F11 after completing the initial screen. The partition can be always active. Windows 7 installed from an updated Lenovo or was it a retail copy.

• several books (business and personal) contact and contacts of the TAB/KEYWORDING?

  I'm about to define and organize a list of contacts-sized companies.

  I want to TAB contacts so that they appear in different types of categories (say by provider type), but I would also (perhaps) personal contacts in a single address book business contacts and in a different address book.

  is there such a feature and if so can someone point me in the right direction? Perhaps there is an existing TAB/word KEY feature in the contacts, and I just haven't used?

  Thank you

  You can configure groups of Contacts. Go to the view menu and select Show groups (or command + 1).

  Go to the file menu and select new group and a new group of "Untitled" will show under list groups, you can then type a name of your choice.

  Then in your list of contacts, select the contacts you want and make slide them on the name of the group.

  Another method is to create smart groups (file > new Smart group) which allow you to define various settings in which contacts which correspond to them become a part of this intelligent group. See the article by MacNN, pointers: groups and groups smart in OS X Contacts.

  HTH

• Problem with contact shares as part of the sharing of the family

  On his iPad, my daughter is put in place with its own Apple ID and part of my family sharing.  But I have two problems-

  (1) it doesn't seem to be an option to disable access to my contacts stored on my iCloud account correctly.  She could easily turn this installation by going to the sound settings.

  (2) for sending an email or an iMessage she gets suggestions for my contacts.  She just send an email to one of my business contacts.

  I have been searching online for a solution and tried different methods for how to advance this broad but without a bit of luck.  There are a lot of messages, but none that offer a solution.

  The only solution is to migrate my contacts to iCloud?  It would be a lot of time because they are shared between multiple Macs.

  Come on Apple!  It's really annoying.

  Assuming that these contacts are not in the shared group and are considered to be 'your '.

  (1)... If she doesn't have your password, it should not be able to access your iCloud account or your contacts.

  (2)... even.

  Looks like she was using your Apple ID and password at a given time, and your contacts are synchronized on his iPad. When she then signed with its own Apple ID, the choice was made to merge the contacts already on his iPad, with all new contacts that she created.

  If Yes, go to his phone now and remove these contacts that are "yours".

  Apple has not 'do '.

• mail to gmail business applications

  Thanks in advance for your attention to this request. I wish that our client apps to open gmail "compose mail" when you click on an email address. In Applications, I should be able to choose or there should be a script to load this feature. The modules do not work, I tried them all for the loading of certain mail clients, but they serve only yahoo, hotmail and gmail. I also tried "subject: config' and the script to start the application is refused (searched forums)." We love Firefox in our firm, for the most part everyone use it. If I can't have emails link to gmail business then I have to force everyone to use chrome. They have a plugin that auto starts a business gmail chrome app e-mail (of course - its google).

  You want to look over https://developer.mozilla.org/en/Web-based_protocol_handlers

• Do you have the HP 30 b Business Professional in Portuguese user guide?

  Hello HP Support Team, how are you?

  I want to get the User Guide of the product with the part number NW238-90001 in PORTUGUESE HP. I only found it in English at http://h10032.www1.hp.com/ctg/Manual/c02651527.pdf.

  Basically, the calculator HP 30 b Business Professional was purchased via the internet in Livrarias Curitiba (http://www.livrariascuritiba.com.br/), , but it did not come with manual. Then, we have already made contact with them, however, they have never answered back to us.

  The order number is 10853564, so I want to help you for us to resolve this bad situation.

  Kind regards

  Alex

  Hello

  I found the guide 20 b in Portuguese:

  http://h10032.www1.HP.com/CTG/manual/c03057321.PDF

  30 b is very similar to the 20 b and the manual in English reference you concerns the 30 b & 20 b - use English manual to see the extra parts for the 30 e.g., programming and Black-Scholes.

  Please note that this forum is not an official page from HP support, is only a forum where mainly users help each other.

  For official support of HP in your country, please see the manual telephone numbers or try your country support pages (for example, the Brazil: http://www8.hp.com/br/pt/contact-hp/support.html ).

  Best regards.

• emulator and business applications

  I am particularly concerned that webOS is not yet ready for prime time hours, and the emulator is very expensive.  To use medical programs (such as the freely available version of Epocrates) or a fully functional Docs-to-Go, a nees to buy emulator for $ 30.  If you have already purchased docs-to-go, then it is an extra $30.  There is a surcharge of $ 30 for each Palm Pre for epocrates if there is more than a meadow in the family (and more than one person who can use this program).  Why Palm did not provide an emulator as part of the package if they were releasing a beta operating system.  I have argued that an operating system without a clock works and then one that is still not completely functional after 3 updates is no more than a beta model.  Why not the emulator so customers requiring a fully functioning phone can use it?  I can only think it is a kick back in this somewhere.  The window of 7 days to compensate for those mind buying the emulator and its lack of functioning reaffirms this claim.  Required materials to the developers for 3rd party applications fit.  Palm should do the right thing and provide an emulator or a refund to those who have been duped into buying from until webOS can provide business applications.

  I wouldn't say that anyone was fooled. Palm has ever done once and still makes no mention of the possibility of using the os on the pre palm software. They do not even mention the fact that a third party offers an emulator that I can find. All that they mention is that it will launch applications running on its new WebOS. In fact they even say more precisely

  "The applications that you have installed on your old Palm OS® by ACCESS or Windows ."

  Mobile smartphone do not work on your phone before, because it uses the

  new Palm ® webOS™ platform. Check the App Catalog for a new version of

  your old favorites. »

  The pre shouldn't be a simple report above the old operating system. Never once was announced as such. Anyone who bought thinking they would be able to run it old apps on it did not read anything. These people should be happy that a 3rd party app to allow for these. All this has nothing to do with the Palm. Once again, not to be harsh but I keep seeing complaints about people being upset that the phone is not something Palm went out of there way to explain that they have simply not supported.

  Message edited by tagz on 30/06/2009 01:34

• OfficeJet Pro 8610: Officejet Pro 8610 wireless printer is constantly busy and does not update the software drivers.

  I'm trying to update my printer via the steps outlined on the HP website. However, when identify my printer and try to install the revised version of the software of my printer continually says its busy. This means that the printer will not update.

  When I first tried this software update the status of the printer was ready however after failing at the start of this first attempt each following update failed because the printer is busy. I turned he walks several times and even turned off then the option automatic updates with no luck.

  Without being able to change that status, I can't update the printer. I know that it is able to connect to the network, because it checks and tells me that he has the latest software version available fo, so I am very confused as to how I can fix this.

  Any suggestions?

  Hey @Branthwaite, welcome to the Forums of HP! I'd love to help you update your JO 8610.

  From your description, I understand that you cannot refresh the printer as it is stuck in the free/busy information.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, please don't forget to leave me and I'll do everything I can to help.