Picking and Portege M400 displacement causes the crash and locking of the

Similar Questions

• Portege M400 - Toshiba Flash Cards crashes on Vista

  Toshiba Flash Cards crashes on Vista when windows is configured to use the standard color scheme "windows" under appearance settings, (for your information, I prefer to use this mode, vista runs faster, uses less energy and less ram system in this mode).

  However, he does not plant immediately, on the contrary, it seems to crash whenever I flip the screen (which happens quite often that I m using a tablet pc) with the version previous software it crashed at startup but which seems to have been fixed with this version, although not completely, but when it blocks it completely will not close even if I force the Task Manager to end the process (rather than just the) Task).

  (Portege M400 - vista family flash cards V.2.00.02 premium - tosh)

  Thank you very much - Garthark

  Hello

  It is very interesting topic. Have you noticed the same thing using the Vista standard color palette?

• Portege M400-103 powers - the automatically every morning at 09:00

  My Toshiba Portege M400 powers - the automatically every morning at 09:00. All auto market options are disabled and also my version of BIOS is upgraded to the latest version 3.20. It is very embarrassing for me because at 09:00 I'm in my car, and my laptop is in my bag. When I get to the desktop from the laptop is very hot.

  Any ideas what could be the problem?

  Thank you!

  / Vassil

  Hello

  I hope that your laptop is not in tablet mode, because if the laptop into hibernation in tablet mode and when you accidentally stick the buttons under the screen of the laptop can be awakened from hibernation mode.

• Portege M400 than all the drivers and the necessary XP Recovery

  Hi people,

  I just bought a Toshiba Portege M 400 without software.
  Any package of all frivers you need is available?

  I tried to get all the drivers of several necessary, but installing caused my system to collapse.
  Thus, Toshiba does not provide a complete software package of /driver for its laptops?

  Kind regards
  Matthias

  Hello

  Toshiba offer recovery discs for the series of laptops that is not too old.
  If you want you can check it out here:
  https://backupmedia.Toshiba.EU/landing.aspx

  If the recovery disk is not available, then you will need to use the drivers from Toshiba Europe page:
  http://EU.computers.Toshiba-Europe.com/

• Pick activity with transaction XA causing the double mistake

  Hi all

  Hi all

  I have a BPEL service that reads the message to a JMS queue and then waits for a response with a PICK 5 min on alarm activity. Now there are rare cases, when I did not receive the answer within 5 minutes (but after > 5 min) and the Pick activity goes into alarm and error. But my JMS queue has an active XA transaction and that translates into a retry of the function of the source. This re-triggers all of the services and another pick activity is created. the choice of the second activity ends sometimes successfully, but sometimes also with the double-error error activity.

  The exact error message is attached here... Note also that we set the correlation id for the intervention on the pick activity...

  concerning

  Rakesh

  Hello

  That's an option... but I try to understand what is causing this intermittent problem to throw the double error message.

  Thank you

  Rakesh JS

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• Portege M400-103's unstoppable to restart

  I have a portege m400-103 at the end of year 2006.

  A few months ago, I found a trouble - if I reboot the noutbook, then after the detection of material and enter the password nout, turn off the power and from new cycle. Reset of the supply, which happened before the operating system starts.

  After removing the hard drive, turn on, turn off, install hard drive again and power on in 50% starting normally.
  I see the SMART hard disk and bad blocks - all normally.

  And yet another thing - if nout not to restart the nut - all working fine a few weeks without any problem. I close the lid and note go to sleep and waik upward then absolutly fine in a few weeks.

  What can I do with it?

  Hello

  It's a little difficult to understand the detachment, but it seems that the laptop doesn't start correctly sometimes.

  > I see the SMART hard disk and bad blocks
  SMART monitors the HARD drive and provides details if something is not wrong with the HARD drive
  Maybe the problem is related to the HARD drive
  This may be possible

  So I recommend you to check the HARD drive. Maybe the laptop would serve using a new HARD drive

• Portege M400 - always 100% fan running

  I was pleased to receive my new toshiba portege m400 today, but the noise of the fan is quite bad.
  The problem is that he always runs 100% - I tried the Toshiba power save the properties of
  set the speed of the fan, but nothing is made, it has no effect at all. Also, I tried to put
  all three bios power options (low, full power, user), but that has no effect either.
  Worse still, the cpu temperature is very cool, just 29 degrees, and there is no need
  at all to run the fan at full speed. I guess that the power save utilities are bugged, and I wonder
  If Toshiba will come out with a new version of their tools? Is there something I can do?

  Thank you
  -Daan.

  PS. the version of the bios 1.30, toshiba power save tools 7.08.00. The processor speed is dynamic, generally at 1 ghz and
  the temprature is very low.

  [Edited by: admin April 20 06 06:48]

  Hello

  Try to clean the cooling modules. You can use the vacuum.
  In addition, you must use the laptop in the places where fans can suck the air out without any problem.

• Portege M400-105: recovery OS installation problem

  I try to format my portege m400-105 with the recovery disk by pressing f12 and sellect dvdrom.
  When I try to format it then clicking it don't tell me no driver found why?
  Question: how will it format?

  Please help me.
  Thank you

  Hello

  Equip recovery CD/DVD-rom, and turn the unit off. Turn it back on and immediately hold down C.

  It works on this path?

• Portege M400: Cannot install windows XP

  Hello

  My friend gave me his Toshiba Portege M400 (PPM40E) at the table of settings windows XP (HHD is already formatted copmletely).

  Before that I've never worked with SATA controller

  So, when installing RAID drivers are required for any HDD lying.
  I bought the USB floopy and downloaded some drivers from Intel.

  Having suffered a bit, I found requireded (as I thought), hard disk drivers detected (even the license agreement I signed) but that pilots still needed to proceed with the installation.

  IF someone faced this problem can you send me on my e-mail ([email protected]) required drivers or give me an exact link?
  Looking forward to your advice.

  Thank you for understanding,
  Best regards from Russia

  Hello

  Maybe a stupid question but why you do not use supplied recovery media for the installation of the OS? As much as I know Portege M400 (PPM40E) comes with Windows XP edition PC of Table (teacher WXP).

  Anyway, check it please this article http://support.microsoft.com/kb/316401/en-us
  Maybe it will help you understand the problem.

• Re: upgrade Portege M400 cpu?

  Hello
  I'm looking to upgrade my portege m400-ez5031 with the fastest cpu, it can handle.
  It's now the centrino duo T5600 1, 83ghz.
  I think the best is that T7600 is possible?

  Jin

  I don't know if he can run T7600, but I think you should read your motherboard specifications:

  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Portege M400 and Vista - load PSD ends with crash

  I am an owner of a Portege M400 (PPM40E) and recently upgraded my Vista operating system. All new drivers work very well except for the * TPM *. Here's what's happening.

  There's nothing wrong with the installation of security platform. I can create a disc to ensure personal (PSD), load and unload until the first time I got disabling my computer.
  After each attempt to load the PSD is answered by an accident. Two seconds after the sending of password, I get a blue screen that informs me the source of the problem: * PFN_LIST_CORRUPT *, a memory dump file is created and the system restarts.

  Anyone facing this problem? Does anyone know how to restore data from a backup manually the PSD created? The Restore dialog box does not accept the * .fsb file.

  It would be great if someone could help me with this as I have not 'clear' backup files that I had stored on the DSP.

  Thanks in advance,

  Rob

  Hello

  I googled a little and found details of error PFN_LIST_CORRUPT.
  NFP: Page frame number and describes the sharing of individual images of main memory where the driver running or orders of this application.
  If an application or driver is beyond this scope, then a BSOD will appear.

  Here are a few tips and proposals to solve this problem I found on an external Web page:
  -updated the BIOS and set the default settings
  -reinstall and update the display driver, audio driver, LAN driver, etc.
  -Reinstall the security help,
  -update the Windows operating system

  In the worst cases, this problem could be caused by a malfunction of the RAM, and in this case, the RAM modules should be replaced.

  Sorry, but I didn't find more info on this issue.

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?