Similar Questions

• Mustek 1200 ub scanner

  Mustek 1200 ub is compatible with vista, please?

  NO.
  Win9 * through WinXp

• Mustek 1200 ub driver for windows 7

  Cannot find the driver that will lead my scaner

  Hello
   
  As has been pointed out by Richard, it was compatible with Windows XP. The manufacturer is yet to write MUSTEK Scanexpress 1200 UB Scanner drivers for Windows 7. Click here to check.
   
  However, you could try to download the drivers MUSTEK Scanexpress 1200 UB Scanner for Windows XP and try to run them in Windows compatibility mode .
   
  If this does not work, you may need to contact the manufacturer for the best support.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• MUSTEK BearPaw 1200CU more Scanner WIA

  I am looking for the four pilot this scaner driver 4 windows7

  Hello

  ·         You remember recent changes to the computer?

  ·         What exactly are you trying to do?

  MUSTEK BearPaw 1200CU Plus WIA Scanner is not compatible with Windows 7.

  There is only Windows XP and the support Web site of the previous operating system drivers available on Mustek.

  http://www.mustek.com/Mustek/supportdrivers.php?&show=drivers&disp_cat=scanner&disp_sr=Bearpaw series & disp_mod = BearPaw 1200 CU more & disp_catid = 18 & disp_srid = 19 & disp_modid = 111

  I suggest you try the following steps:

  Method 1:

  Try to install the drivers in Windows XP compatibility mode and check that helps:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 2:

  If you have Windows 7 Professional or ultimate or Enterprise installed on the computer, then it can install Windows XP mode and install the scanner in XP mode using the driver Windows XP and use it, follow these steps:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• building 2 machines for the compositing & editing

  Hi all, Merry Christmas and happy new year.

  Working in the animation industry, have signed a contract of 60 episodes, each is 15 minutes.

  (will be delivered on hard drive ) 1920 * 1080 standard HD, DNxHD Codec 120 as the channel requirements,

  our animation workflow on toonboom then export each layer as .swf mated and compositing each scene in after effects CS6 (the only scene include 05:20 layers) and then the editing phase.

  
  

  1 - the machine of compositing looking:

  Processor: Intel Core i7 - 3930K

  http://www.Newegg.com/product/product.aspx?item=N82E16819116492 & TPK = i7 - 3930 k

  CPU cooler: CORSAIR Hydro Series H80

  http://www.Newegg.com/product/product.aspx?item=N82E16835181016 & nm_mc = AFC-C8Junction & c=AFC-C8Junction-_-na-_-na-_-na cm_mm & AID = 10446076 & PID = 3938566 & SID =

  motherboard: Rampage Extreme IV

  http://www.Newegg.com/product/product.aspx?item=N82E16813131802

  
  

  Video card: EVGA GTX 680 classified 4 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814130801

  Memory: CORSAIR Vengeance 64 GB (8 x 8 GB) - 1866

  http://www.Newegg.com/product/product.aspx?item=N82E16820233384

  Power: Antec High Current Pro HCP-1200-80 PLUS GOLD, High Current hybrid Cable Management Active

  http://www.Newegg.com/product/product.aspx?item=N82E16817371043

  Case: Rosewill BLACKHAWK-ULTRA-Super Tour

  http://www.Newegg.com/product/product.aspx?item=N82E16811147157 & nm_mc = AFC-C8Junction & c=AFC-C8Junction-_-na-_-na-_-na cm_mm & AID = 10446076 & PID = 3938566 & SID =
  

  
  

  Drive for OS.: SAMSUNG 840 Pro Series-256 GB SATA III MLC internal (SSD)

  http://www.Newegg.com/product/product.aspx?item=N82E16820147193

  Other readers: HGST Ultrastar 7 K 4000 -3 TB-720 0 RPM 64 MB Cache SATA 6.0 GB/s internal enterprise disk 3,5 '' hard

  http://www.Newegg.com/product/product.aspx?item=N82E16822145621

  Drive Blu - Ray: LG black 14 X BD - R 2 X BD - RE 16 X DVD + R 5 X DVD-RAM 12 X BD - ROM 4 MB Cache SATA BDXL

  http://www.Newegg.com/product/product.aspx?item=N82E16827136249
  

  That's all, I need to ask you about:

  - your overall opinion on the components (MB. Intrigued to choose me to Rampage Extreme IV, Sabertooth X 79 and P9X79 WS)

  -your advisor about the disk configuration, as well as how ssd to use and how many drive hard and how to organize with the card mother, and you recommend to ad a hhd 10 000 rpm with them, as I told you before that this machine will be for compositing only not for the edition

  -do I need Areca ARCcontroller? What is your recommendation?
  

  2 - the editing machine search:
  

  
  

  I am interested on thunderbolt especially on these products:

  - Reading & Design Blackmagic UltraStudio 4 K Capture Thunderbolt

  http://www.blackmagicdesign.com/products/ultrastudio4k/

  - Areca ARC-8050 ThunderBolt 8 bays

  http://www.nexus.com.au/areca-arc-8050-Thunderbolt-8-bays-SAS-RAID-serious-workhorse-demo-en-store.html

  
  

  - G-RAID with Thunderbolt

  http://www.Newegg.com/product/product.aspx?item=N82E16822205178

  -17 "TV logic XVM - 175W multiformat HD/SD LCD monitor

  http://www.abelcine.com/store/TV-logic-xVM-175W-17-inch-multi-format-LCD-HD-SD-monitor/

  so, what's your recommendation? should I go with lga 1155 as below:

  cpu: Core i7 - 3770 K Ivy Bridge 3.5 GHz (3.9 GHz Turbo)

  http://www.Newegg.com/product/product.aspx?item=N82E16819116501 & nm_mc = AFC-C8Junction & c=AFC-C8Junction-_-na-_-na-_-na cm_mm & AID = 10446076 & PID = 3938566 & SID =

  CPU cooler: CORSAIR Hydro Series H80

  http://www.Newegg.com/product/product.aspx?item=N82E16835181016 & nm_mc = AFC-C8Junction & c=AFC-C8Junction-_-na-_-na-_-na cm_mm & AID = 10446076 & PID = 3938566 & SID =

  
  

  motherboard: ASUS P8Z77-V PREMIUM

  http://www.Newegg.com/product/product.aspx?item=N82E16813131850 & TPK = Asus % 20P8Z77 - V 20PREMI UM % 20ATX % 20LGA1155% 20Motherboard %

  Video card: EVGA GTX 680 classified 4 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814130801

  
  

  Memory: CORSAIR 32 GB (4 x 8 GB) - 1600 revenge

  http://www.Newegg.com/product/product.aspx?item=N82E16820233232

  Power: Antec High Current Pro HCP-1200-80 PLUS GOLD, High Current hybrid Cable Management Active

  http://www.Newegg.com/product/product.aspx?item=N82E16817371043

  
  

  Case: Rosewill BLACKHAWK-ULTRA-Super Tour

  http://www.Newegg.com/product/product.aspx?item=N82E16811147157 & nm_mc = AFC-C8Junction & c=AFC-C8Junction-_-na-_-na-_-na cm_mm & AID = 10446076 & PID = 3938566 & SID =
  

  
  

  Drive for OS.: SAMSUNG 840 Pro Series-256 GB SATA III MLC internal (SSD)

  http://www.Newegg.com/product/product.aspx?item=N82E16820147193

  
  

  Other readers: HGST Ultrastar 7 K 4000-3 TB - 7200 RPM 64 MB Cache SATA 6.0 GB/s internal enterprise disk 3,5 '' hard

  http://www.Newegg.com/product/product.aspx?item=N82E16822145621

  
  

  That's all, I need aske about you:

  -should I go for lag 1155 for TEC. bolt of lightning? If so your overall opinion on the components of this please,

  -your advisor about the disk configuration, as well as how ssd to use and how many drive hard and how to organize with the mothebord as interns and lightning as well as external, and don't recommend announces it a hhd 10 000 rpm with them?

  
  

  - need me Areca ARCcontroller? what is your recommendation?
  

  Thank you very much for your support.
  

  
  

  
  

  
  

  
  

  
  

  
  

  Shery,

  Your first machine "compositing." It looks good, but I wonder why you chose for the water closed when the Rosewill case comes with so many cooling fans. Your considerations should probably be more influenced by the height of the RAM modules, rather than less noise. The H80 is a good CPU cooler, but does no better than for example a charge-air cooler of Noctua NH - D14 cool.

  You did not mention how Ultrastars you intend to use, but all the comphonents that you mentioned, 1200W PSU seems a lot and probably a 850W and 1000W version is sufficient. You can check this by following the link on this page: http://ppbm7.com/index.php/disks-psu and the system configuration of load to 100% and capacitor aging to 30%.

  In regards to your second machine "Edit" I have more comments, according to the remarks of Jim. I recommend a card mother socket 2011, because the 1155 platform is limited by the number of lanes PCIe, which makes it a waste of money to add a Thunderbolt device, because in this case the 4 channels the device reduced Thunderbolt video card PCIe-8 x PCIe, halve the bandwidth of a great video card.

  If you think you have need around 8 drives on a raid controller, I suggest an Areca ARC-1882iX/12 map, which is a PCIe 8 x controller with double the bandwidth on the version of love at first sight. But that requires a card mother socket of 2011 in which case Asus is the logical choice. You may even consider the motherboard P9X79 WS for both machines, since then you could use the double NETWORK card to easily transfer compositions to network cables mounted machine bundled with 2 GB connection speeds.

  On the video card in mounting machine the 680 can be exaggerated if the editing is limited (compositions are exported from EI as files monolayer) and the bulk of the work is DNxHD encoding, since it is the load of CPU and GPU not related. In this case a GTX 660 Ti may be sufficient. And my previous comment about the power supply on the machine of composition also apply to the editing machine. Check if 1000W is not enough, even with 8 Ultrastars.

  Regarding the CPU on the editing machine, the i7-3820 is a quad core locked and the i7 - 3930 K is a hexa core unlocked. Simply put, this means the unlocked CPU is easy to overclock and the locked version is much harder to overclock even slightly. Export to DNxHD is very largely dependent on the speed of the processor and the number of hearts. In this perspective, overclocking can make a huge difference in performance, and the nod would go to the i7 - 3930K, even with the higher price. On the other hand, the editing machine would need no more than 32 GB of memory, since PR uses little more than 25 GB even in rather extreme cases.

  I hope this helps.

• Packard Bell BV Diamond 1200 Plus Scanner

  I recently changed my PC and am now on Windows 7.  There is clearly a problem with my Packard Bell BV Diamond 1200 Plus Scanner flat which, apparently, is not compatible with Windows 7.  Y at - there no way to get around this please or that I simply must "dump", which was a superbly stable piece of equipment?

  This - https://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Packard+Bell+BV+Diamond+1200+Plus+Flatbed+Scanner&v=Packard+Bell+BV&uid=&l=en-US&c=Printers+%26+Scanners&sc=Scanners - if its your scanner implies there isn't a W7 32 or 64 bit driver for it.

  You could ask the manufacturing of a maybe - pilot http://www.packardbell.co.uk/pb/en/GB/content/support and go to the PB site for your region.

• Pavilion g7t-1200: pilot missing for unknown device

  I had to replace the hard drive in my laptop Pavilion g7t-1200. I managed to get everything installed on the new hard drive except for a PCI device. When I look at its properties in Device Manager it says the following:

  PCI\VEN_10EC & DEV_5209 & SUBSYS_1666103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1666103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Can someone tell me which driver I'm missing?  (PS: I am unable to find anything on the laptop that is not working)

  Thank you, Bill

  Hello

  Should be Realtek card reader driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55030.exe

  Kind regards

  DP - K

• Pilot network Pavilion dv6t 1200 CTO Windows XP Realtek PCI-E

  Ahoy,.

  I am trying to download the driver for NETWORK card for my Pavilion dv6t 1200 CTO running Windows XP. I normally do by going here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3945150&LC=en&cc=us&DLC=en&lang=en&cc=us&submit=go%20%BB

  .. .clicking on the "Microsoft Windows XP" operating system and then to find the driver on the next page.

  However, it seems that clicking on "XP" takes me to the QuickLaunch driver download only. Am I the only one? I tried with different browsers.

  .. .quite frustrating.

  He got off the Realtek site.

• HP Pavillion TX2025el: Nvidia Geforce 6175 - resolution 1200 x 900

  Good evening (in Italy's 23:32) to HP support staff, I need your help.

  After you have installed Windows 10 64-bit on my HP Pavillion TX2025el, the maximum screen resolution is 1024 x 768 instead of the previous a 1200 x 900.

  The drivers installed by default are Microsoft std, but with this, I can't reach the maximum resolution.

  Please can you tell more or help me find the right? Even try to install NVIDIA Installer including the system and installed the best scanner driver (as as made on my previous WINDOWS 7 Professional 64 bit), the system "tells me" that it is impossible to install.

  So please help me to solve this problem. I hate my screen 1024 x 768.

  For I have not found a solution IMUST BACK to MY AMAZING Windows 7 Professional

  Thank you a lottery for your help and the co-op.

  Stefano Reali of Italy

  Hello:

  See if it works for you...

  Download the graphics driver Vista support page for your laptop.

  This package contains the driver for the chip video NVIDIA GeForce series in the notebook models and operating systems.

  File name: sp42635.exe

  Run the above driver.  You will probably get an error of unsupported operating system.

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp42635.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• HDX 16 t 1200: upgrade Windows 10: Base system device

  Hello

  First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

  I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

  >? Another device

  - ?! System device base (calling it a 1)

  - ?! (2) base system device

  - ?! Device base system (3)

  - ?! Unknown device (4)

  Properties:

  1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

  2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

  3 bus PCI 6, device 0, function 3

  Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

  4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

  Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

  I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

  Thanks in advance for any help.

  Hello:

  You need these drivers...

  Base system devices:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp42446.exe

  Unknown device:

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Impossible to install ATI X 1200 drivers under Vista 64-bit on Satellite series

  Please, someone help me
  I'm trying to install the X 1200 ATI drivers on my vista 64-bit and nothing. I go to ati.amd.com and download
  the latest ati x 1200 for vista 64 drivers and install it, after installation, a reboot of the machine and nothing.

  Vista indicates just in the graph "standard vga card."

  I hope that someone help me

  Thank you

  Guimenez

  Hello

  I Don t know why install the won´t drivers. You may need to install manually in the Device Manager (I mean, go to the device, and then on the device - in your case the vga controller - and you must go to the "driver update", then simply follow the installer for installation).

  What I really suggest, is to go to these sites and download the drivers from there, because they have been modified to run on mobile systems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  It would be better because the normal pilots are not intended to run on portable computers.

  Please give some information about your situation
  Welcome them

• HP Pavilion dv6t 1200 - unknown devices Intel(r) ICH9M LPC Interface Controller - 2919

  Reloaded from zero (no upgrade) HP Pavilion dv6t-1200-P/N: FV161AV with Win7 (32-bit) Home Premium

  After you apply most of the drivers Win7 (32 bit) from the HP Support, I have yet 2 unknown devices listed in the list of devices

  I'm looking for any help... especially the drivers for these devices listed below

  (1) Intel(r) ICH9M LPC Interface Controller-2919 (ACPI ENE0100

  (2) system compatible ACPI Microsoft (ACPI\HPQ0004)

  Thanks for all the help and an ox for the pilots/difficulty

  HE'S

  Hi, Laura

  You need the ENE CIR Receiver driver and the driver HP ProtectSmart

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75516-1&CC=US&DLC=en&LC=en&os=4062&Product=3945150&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76187-1&CC=US&DLC=en&LC=en&os=4062&Product=3945150&sw_lang=

  Paul

• HP 2000-369WM laptop PC: Message 'resolution is less then 1200 x 900 '.

  My screen resolution is set at the recommended setting of 1366 x 768 but a message yellow triangle "your resolution is less then 1200 x 900"  Some elements could not fit on your screen. "Some of my programs, such as Roxio programs stateing messages my resolution is less than 1200 x 900 and will not work.  My slides and video appear to work well.  I set the resolution for different contexts over 1200 x 900, but nothing helped.

  Hi there @brainstrain,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support and see that you are having a problem with the resolution on your laptop of HP 2000-369WM. You mentioned to receive an error message indicating "your resolution is less then 1200 x 900.  Some elements could not fit on your screen. »

  Have you tried to update the currently installed driver in Device Manager?

  Did you run the HP Support Assistant to make all new pilots?

  Have you tried;

  • Uninstall the driver
  • Reboot the laptop twice
  • Reinstall the driver?

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Update Windows 10 drivers will become available on 2000-369WM HP drivers and Downloads Pageyour product. They will be released as soon as they are available for HP.

  This problem occurred after you had upgraded to Windows 10 or it was happening before?

  Have you done all your Windows updates?

  I have included a recommendation of troubleshooting of Microsoft below.

  

  I was doing some research on the matter for you to find solutions as much as possible. I came across someone else who had a similar problem. They wrote to Microsoft and there is also a reply here with attached troubleshooting, you could try. The post is called If your resolution is less than 1280 x 960, some items may not match the screen.

  If please re-post and let me know if this work.

  Have a great day!

• No laser Jet 1150 no way to set FastRes 1200 on Windows 7

  I am running windows 7 Home premium 64-bit, and I'm not able to put the printer in mode FastRes 1200... 300 and 600 dpi are only two options at my disposal.

  Driver printer is part of Windows 7 and does not update me. HP website just tells me to use the construct in windows drivers and gives me no other options.

  Any help on how to update the driver or get the printer to work in mode FastRes would be greatly appreciated.

  Baring that, any advice on the release of superior quality prints with this printer would be welcome... Right now, my attempts to print scanned in black and white pencil art don't look so good. Hoped that fastres would offer the best resolution.

  Thank you!

  I'm sorry, but the pilot of InOS is the only driver of this printer.  There is no way to get the FastRes 1200 mode, if it is not available on the pilot InOS.  I'm sorry.

• Photosmart Plus B210a ink level by computer will not work

  I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

  It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

  Updated drivers