pilot? help please

Similar Questions

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

  My laptop Acer gives me a blue screen on start, or crashes on startup.
  I just got an error code:
  Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• Constant BSOD! Help, please!

  Get the constant BSOD stops. More than 5 - 10 times a day! I have no idea, and also my knowledge, everything is up-to-date. Help, please! :(

  Here is a link to my most recent minidumps.

  Current Minidumps link

  http://www.mediafire.com/download/76d7v7z904d6o46/CrashMinidumps.7z

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  
  Don't forget to download any other DMP files (especially those running auditor)

  If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  But sometimes it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Click Start and type "auditor" (without the quotes) and press enter
  Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

  Choose "Select custom settings from a full list" and click "Next".
  Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  On the next page, select "Finish".
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  Further reading
  http://support.Microsoft.com/kb/244617

  Words of driver verifier
  
  Information check driver driver Windows Vista - Microsoft Search Verifier
  Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
  Pilot feature pool http://support.microsoft.com/kb/188831

• Cannot install Adobe Photoshop, although I have creative cloud. Help, please?

  I have creative cloud and I managed to successfully download the other programs through it, but I can't download Adobe Photoshop. When I click on download it from the cc Web site, it opens the Adobe Application Manager and says that I have already installed Photoshop, but I do not have... Help, please!

  Did you participate in the beta of Photoshop before or install a trial version before?

  If you are using Windows, you can uninstall Photoshop from the Control Panel.

  If you are on Mac OS X, go to Applications > utilities > Adobe Installers and double-click on the link to Uninstall Adobe Photoshop CS6.

  Is there is nothing to uninstall, then you can run the Adobe cleaning tool to remove all traces of Photoshop CS6. You can download it here http://www.adobe.com/support/contact/cscleanertool.html. Run it, you may need to scroll down the list until you see Adobe Photoshop CS6 or Adobe Photoshop CS6 pilot. Select it and then click the clean up selected button.

  You should now be able to install Photoshop using Adobe Application Manager.

• After my 10 updated iOS even if I am connected to view the content I have cloud and iCloud when I try it asks me to put in place when already established sound upward. Help, please

  After the last update of iOS10. Even though I am connected to iCloud when I try to display the content he asks me to implement the iCloud. Can anyone help please.

  Try to perform a restart- restart your iPhone, iPad or iPod touch - Apple Support

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Notes crashes in the Sierra. Help, please!

  After the upgrade on my iMac (mid-2014), I can't open the Notes. Crashes every time after I clicked through the tutorial on the new updates for Notes. Help, please! Thank you!

  Stop your restart the computer. Launch of Notes, but do not use the tutorial.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

  NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

  Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.

• lost or stolen iPhone. It is w / 'Find my iPhone', later received email that it has been found. No call and impossible to recover, now phone is in offline mode. I am leasing through the iPhone upgrade program. Help, please.

  6 sec more lost/stolen iPhone. Turned on the 'lost' Mode and displays the number to call if found on-screen. It is w / "Find my iPhone", went up, no response from any home in the area. Later received an email that it was found, still no call to the number on the screen. Several unsuccessful attempts to get it back, now the phone is in offline mode and says that the history of the site is not available. I left a note on all the doors in the place indicated on the "find my iPhone" describing my phone lost and left a number to call. I am leasing through the iPhone upgrade program. Help, please.

  There is no way to locate now, unless the one who found it exerts a force on you contact on this number you posted

  The good news is, since you have find my iPhone, they will not be able to reuse the phone even if they are trying to restore. Unless they know your password, or you have a valid proof of purchase AGFI won't be deleted.

  So if the person who found the phone knows about it, he or she would rather go back because it would be of no use to them.

• I lost my iphone and its dead and I can't find on find my iphone help please!

  I lost my iphone it also died and find my iphone does not. help please

  Nothing we or anyone can do.

  If your iDevice is lost or stolen

  If enable you find my phone before it was lost or stolen, you can track only when connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. Neither Apple nor anyone else may find your device. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.

  If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:

  1. declaration of a lost or stolen Apple product

  2 find my lost iPod Touch

  3. AT & t. Sprint and Verizon can block phones stolen/tablets

  4. What-To-Do-When-Iphone-Is-Stolen

  5. use ICloud Mode lost

  6. what to do if your iOS device is lost or stolen

  7 6 ways to track and recover your lost/stolen iPhone

  8. find my iPhone

  9 report Stolen iPad | Stolen lost found online

  It pays to be proactive in following the advice on the use of find my phone before you lose your device:

  1. find my iPhone

  2 set up your iDevice oniCloud

  3. OS X Lion/Mountain Lion - in regard to my Mac

  4 the free configuration find your iPhone (even on unsupporteddevices)

• I want to scan in my bar-coded pass for our local sports club. Help please.

  I would like to analyze in some of our LOCAL little bar pass coded for sports clubs and our library. I can't find an app that will allow for this. Help please!

  Take a picture.