Pilot WPD in error code 10

Similar Questions

• G7P83AV: Pilot giving the error code 43 since 10 display windows

  Yet another problem with 10 Windows on my machine. Found out today that the damn my display driver for that I can't use a projector or external monitor. According to the screenshots, I tried to update the driver, but it does not cause the error to stop. I even uninstalled the card and made "scan hardware changes" to reinstall, but nothing helped. I tried to go to Intel, but they refuse to allow me to download their driver because HP has a pilot-owner on this machine. Can anyone help?

  

  Hi @ClydeS,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 15 t-r000 CTO and problems with the Intel driver that gives you a Code 43 error. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Here is the correct driver for the laptop if you need. sp72370.exe

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Reboot the laptop twice to make sure that all updates are completed.

  Please let me know how it goes.

  Thank you.

• I want to install microsoft WPD but I see error code 10

  Microsoft WPD improved password storage driver

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Error Code 10 is similar to the following:
  This device cannot start. (Code 10)

  The most common resolution is to update the drivers associated with the device. To do this, follow these steps:

  In the device properties dialog box, click the driver tab.
  Click Update driver to start the Hardware Update Wizard.
  Follow the instructions to update the driver.

  J W Stuart: http://www.pagestart.com

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• Desktop H500s put in the disk hard windows 10 from another OPERATING SYSTEM PC - ERROR CODE 1962 - No.

  I tried to replace the current hard drive with the disc provided with windows 10 from another PC.

  I have is after having swapped the hard drive. The system cannot load Windows 10 and displays this message "ERROR CODE 1962 - No. OPERATING SYSTEM".

  The main reason I like to swap the drive is because it is a larger and faster disk and it come with Windows 10 Enterprise license. Instead of my current hard drive of Levono who only 8.1 Windows

  I understand that the pilot is maybe a problem. But, I should at least be able to see the Windows screen and I can fix it the driver, instead of the message "ERROR CODE 1962 - No. OPERATING SYSTEM"

  Note: I did I tried to put this disc in the CD player, I've found, it can read the disc. Therefore, should not be SATA non-compliance issue.

  Any suggestion?

  Hope to hear the suggestion

  Dear all

  I managed to fix in Boot "Disable UEFI and activate the legacy", my system is running. I just need to install the audio driver after the system is running

  Usefully it doesn't matter who will help to have the same problem

• CD-ROM not working not not on my satellite - error code 39

  Hello

  My CD-Rom is not working.
  Checked on the Panel, Manager of devices-
  It shows a yellow mark against it with the following message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I deleted and restart the computer, but the rest of the problem. I wonder where I could find the driver concerned, because I thought that Vista would have the pilot must be able to load automatically.

  Friendly advice would be greatly appreciated.
  Kind regards, Philippe

  Hello!

  The error code 39 is a very common question, but it can be solved very easily:
  In order to check the MS knowledge base:
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Error code 5005 Keithley 2602 not detected

  Hello

  I use the Keithley 2602 A meter/source in labVIEW2011.

  An error code 5005 product (wholesale value) on the display.

  This error is not detected by the driver.

  In the pilot of the world ErrorQuery maintains False even if an error occurs.

  If I put the case true manually then the error is read back form the instrument.

  I have attached the pilot where the problem occurs.

  Why it is not detected by the driver?

  Kind regards

  Bernard arts

  Hello

  I'found the problem. To initialize the global error query must have the value true otherwise, no errors are detected (playing the instrument).

  The error occurs on the screen of the instrument (if I can see that an error occurs), but it was not detected by the sub vi because to initialize the query of error set to false (the default).

  Kind regards

  Bernard arts

• GPIB write error code 6, how to make good waiting in comm GPIB

  Hello!

  I use a MUX Keithley and a digital Voltmeter to measure different values in my system, including the resistance of the wire 4. My project runs for several hours without any problem, but last night I got an error after about 8 hours DURATION. My mistake in the main vi shows the following error:

  GPIB Write in A_4Wire_resMUX_2!1,2!3,2!5_new.vi Error code 6.
  

  I have attached this Subvi, as you can see, I put a while loop in the Subvi to give enough time to measure 4 son to do. But of course maybe another function GPIB write hangs in the Subvi, not that after the while loop.

  I have 2 questions:

  1. What is the best way to make the error handling in comm GPIB, so I could see on my final mistake on what caused the problem in this certain sub - VI?

  2. can someone show me what I could do better in this sub - VI, in order to avoid possible errors of GPIB?

  Its just guessing, but I think the error comes from that I can't give enough time to the GPIB device to perform an action, then the next writing of GPIB breaks down?

  more information: Windows XP, LabView 2010 full version

  Thanks much for the advice and help!

  2001 pilot

  7001 driver

  Now that you have a modern version of LabVIEW why are you not taking advantage of the instrument driver network?  VISA is beautiful and 488,2 gross primitives should consider as "obsolete".

  Since you did not use the specific instrument driver vi we cannot say that write on this device generates the error that you are experiencing.

  So to specifically answer to Q1.  Use the driver found on the instrument driver network - they are tested and structured in a way to help debug your application and to take advantage of the powerful features of VISA...

  And (2) (see #1) and change the sequence stacked in a state machine

• HP Pavilion dv6-7020us: driver error Code 28 problems

  Sorry if this is kind of a long start...

  Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

  First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

  Got Windows 7 x 64 bit installed.

  Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

  The problem, however...

  With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

  Now currently at a loss to know what to do...

  Properties: Details: Hardware ID: value...

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

  PCI\VEN_1814 & DEV_539A & CC_028000

  PCI\VEN_1814 & DEV_539A & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FFOO

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E22 & CC_020500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

  Hello:

  Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp57538.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56166.exe

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  Controller of Bus SM: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

  Controller of universal serial (USB) Bus:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  ACPI\HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• Error code 0 x 80070057...

  Hi, I desperately need help with the error that has infected my computer below.

  I use Microsoft Windows 7 Home premium in a HP - Compacq Presario with a duel processor.

  Error code 0 x 80070057 above appears to be in any of my files copied or transferred to my documents .wpd and there also my personal files to connect to my web browser. Also, I don't know how to stop it either.

  The exact error message is: "error 0 x 80070057: the parameter is incorrect." Technology Microsoft, Jonathan Esperon, said that he had downloaded music on the web site of Mixrosoft.

  This error message is now not allow me to transfer my personal files to the new user that I had to put in place to access my other word perfect files and causes my software wordperfect to freeze in the middle of a sentense.and, the program must close before I have a chance to save my new corrections on my legal documents I work on.as a pro is because I can't afford to pay for legal assistance, and this error also prevented me from access to the Internet, as my wpd has somehow been attached to my web browser...

  I used Microsoft tweb roubleshooter to find the problem and fix it.  Convenience store said he cannot fix it or contonue because an error is preventing them from troubleshooting, and they try to find the problem and fix and report to me, they cannmot solve the problem and will close the web page and off, which they do and then I sometimes can't get back on the web. This problem in my computer for more than 8 months now and everything I have not the chance to record either on the web or in my word perfect files are lost.

  This error is to me literally "crazy" and since I don't know anything about how to solve a technical problem, I'm completely lost.  I contacted my tech support free Microsoft help me, who have had to take control of my computer several times, and that themselves could not fix this problem, until their latest technology that took control of my computer says that this error came from a music download.and that he could fix but, I have to pay him first. My contract to purchase my computer States that free support tech is 7-24 avbailable and I felt that, since it was a common problem with many of theiir customer and their technical support was supposed to be free, I couldn't understant why I had to now pay their technology to solve their problem.

  I understand that I'm not the only one a whyo has this problem with the Microsoft web site and or software, as I saw in this forum, many others who have had the same problem with this error.  Fortuniately some could solve this problem by using this forum, but I was not so lucky.  I'm only a word processer and dare not try to type a command tech, for fear of aggravating the problem.

  Technology Microsoft above who said he could help me after finding their err, was Espersen of Mr.Johnathan who found where the error came to say he could fix if I paid him for his time.

  It's on the FREE support that I got with the purchase of my new HP - Compaq Persario purachased from Best Buy last year around July 2011.

  The "Geek" Squad from Best Buy that had me bring my computer after that they could not solve the problem by taking control of my computer.  They worked on it in their shop, but could not find where the error came from my new computer now destroyed and they have not made worse because they too transferred this corrupt file back into my computer, hinging throughout my computer again. Best buy then gave me a new computer replacement free of charge.  The tech Geek Squad who took care to transfer my files he had saved to get back on my new computer replacement, without first of all to find this problem and fix it, he then naturally infected my replacement computer and once again, it has destroyed havoc on my replacement computer and destroyed now more about this replacement , for this file must be in my computer in more than 20 different places and I can't find any of these files.

  Microsoft technicians, three times took control of my computer to fix, then contacted HP Tech and too much, they take control of my computer to fix and every tech again reproduced this file via the new replacement.

  Then I thought it was a problem of software wordperfect and Corel called; After about three times when three different technicians took control of my infographic to fix, a tech found the problem and fixed it, but it was in a single file and now this error in hundreds of files transferred via my computer.

  When I tried to cut and past all the user files in my files main usser to stop I hope that all these duplication of files, this error stopped me and now I'M LOST. I do not know where to turn and reformat my hard drive again ONCE will not work because it did not work before with the Geek Squad at best buy and I lost more than I won.

  Please someone can help me, it cost me an arm and a leg. They would get same mush because I am unable to walk a lot and my arms are really only good to type. Ha ha. I hope that I can type.

  One thing I know it, is that I am not a technician and don't know how to fix this or type any command of tech...

  LAOU which may be able to help me.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Realtek card gives the error code 10 and does not work since the change of satellite

  How can I fix the realtek on my computer card. It was the dial upwards, after he took off and replace it with satellite my computer wouldn't access internet
   
  How can I fix the realtek on my computer card. He has been on dial-up, after taking if off dial-up and replaceing with satellite my computer wouldn't access internet. Noted code 10 and realtek does not work. So a please help fix me my computer.

  Hello

  What operating system is installed on the computer?

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the following article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• [Completed] Attempts to install KB977863 give error codes: 800736B 3 and dt000.

  Hi, I use Windows 7 Professional edition. The Windows Update 24.02.10 indicated that several updates are ready for installation. Everything installed OK except for KB977863 update for Media Center for Windows 7.
  I tried the manual installation; Help & support - ADVANCED; looking for the error code in this forum and tried the suggestions; I tried the windows update advocatus, but in vain.
  Anyone else had problems with this update?
  Kind regards
  Davy D.  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  I suggest you to run the system update readiness tool: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821

  And even scan SFC, follow these steps:
  Open an elevated command prompt. To do this,

  i. click on Start ,

  II. click on all programs ,

  III. click Accessories , right-click command prompt ,

  IV. and then click on run as administrator.

  v. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.

  VI. at the command prompt, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect

  Link for reference: http://support.microsoft.com/kb/929833

  Please return back with the results,

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0xe0f00013 (new hard drive) retrieving error code

  Laptop model: HP envy 14 beats 1260se, windows 7 64 bit.

  OK, here's the story. A couple of weeks ago, I did a test drive and this error 'problem of intelligent control' came, and after spending some time on the internet, I discovered that I need to change my hard drive. I created a post as well, here is the link:http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Smart-check-issue/m-p/2337229

  So now, I bought a new hard drive and the model is: 750Go momentus XT (link:http://www.amazon.co.uk/Seagate-750GB-Momentus-Serial-Hybrid/dp/B0068QO82G/ref=sr_1_1?ie=UTF8&qid=13... )

  I replaced my HD and so my recovery disks to reinstall windows and basically copy all the original files in the new HD. However, at the end of the restore process (7 discs), I received this error: "Recovery Manager could not restore your computer by using the original image. Please contact HP support. "Error code: 0xe0f00013.

  And then after I pressed 'Finish', he went on the screen of my laptop which basically a HP logo appears and it stops right there!

  I have no idea what to do now and it becomes really annoying!

  Thank you, Aria.

  Hi Aria,

  It seems that you bought a hybrid car and this is probably what causes the error when you try to use your initial recovery disks.

  Here is another solution, you can try which should allow you to load Windows 7 on your new HARD drive.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is Here. These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K