Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

Similar Questions

• Tecra S3 - error code 43 on video card

  Looks like S3 of my friend has a problem with the video.

  I tried a disassembly/reconnection of the video card and basic thermal paste both the video chip and the cpu (fan now spins in less). After a bios reflash things seemed better but the problem started soon don't reproduce.

  Windows 7 Device Manager now displays an error code 43 and advises that the device has been stopped because it had reported problems.

  I think he's watching a new video card, but I had zero chance of finding one so far.

  Any other suggestions?

  Thank you

  J.

  Hello

  What is the problem exactly of this graphics card? You have lines on the screen or what exactly is going on?

  Maybe it of only necessary to reinstall the driver now what you think?
  The same problem occurs on the factory setting?

  New spare parts, you can get from an authorized service provider. On the Toshiba site, you can find a list of them! ;)

• I can't send or receive emails using Windows Live Mail. Receive the error code 4402. I can send and receive email on my hotmail account.

  I can't send or receive emails from Windows Live Mail. Receive the error code 4402. I can send and receive emails from my Windows Live hotmail account. In Windows Live Mail, it also says my server is an http / imap server. Can it be replaced by a pop3 server, so, how? Thank you

  Well, took me a few hours and without the help of a person (TIP!), I've fixed it. Remove the live mail client account and re-apply / restore the account. Solves what seems to be a sync error. -19 October 2011

• Windows 126, specified package Management Instrumentation error code is not found.

  Try to start the Security Center I found that Windows Management Instrumentation has been disabled.  When I try to start Windows Management Instrumentation, I received the error code 126, specified module could not be found. Any ideas on how to fix?

  Hello jrk_954,

  Download the the WMI - Version 2.0 diagnostic utility. It will be
  help diagnose and repair problems with the WMI service.

  http://www.Microsoft.com/downloads/en/details.aspx?familyid=D7BA3CD6-18D1-4D05-B11E-4C64192AE97D&displaylang=en

  Let us know if that helps.

  Marilyn

• Windows live gives me a 0x80040a15 error code when I want to open a picture

  Windows live gives me a 0x80040a15 error code when I want to open a picture

  Windows live gives me a 0x80040a15 error code when I want to open a picture

  =================================
  Maybe the exclusive database is corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• Why can't sign in to windows live messenger? Get the error code 80040200

  Why can't sign in to windows live messenger? Get the error code 80040200

  You will find support for Windows Live Messenger in these Windows Live help forums: http://windowslivehelp.com/forums.aspx?productid=2>

  The current time and the date now to (UTC/GMT)

  17:39

  Tuesday, October 23, 2012
  Standard time + 0000 UTC

• Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  Cannot install Service Pack 4 (KB2463320), windows update has encountered an unknown error, Code 2B 33

  SQL 2005?

  Download and install from here... http://www.Microsoft.com/en-US/Download/details.aspx?ID=7218

• trying to update my windows but it shows the found error Code 80070017

  I'm trying to update my windows but it shows the found error Code 80070017, I installed Microsoft fixit center to solve the problem, but the problem persists, in addition to this Windows Secuirty Center service is off please guide me how to do?

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/956704

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• Windows Live Photo Gallery causes the error Code: 0 x 80010108

  I have a desktop XPS 8500 running Windows 7.  Love it except for one thing: Windows Live Photo Gallery causes the error Code: 0 x 80010108.  Yes, I x it down and go ahead and use my computer but like it to stop.  I have google code and there are a number of fixes called there for him - even though they claim.  But I was reluctant to download anything on sites I don't necessarily trust OR conform to change my registry to fix it.  Can someone recommend a cure to my problem?  I have confidence in this forum for more than 12 years and feel that you will not recommend something that might get me in trouble.

  Thank you

  Bessie

  Hi Bessie,

  Thanks for the reply. I suggest you to uninstall Windows Live Essentials from the computer and update to the latest version. You can download it from the link http://bit.ly/GQ9tPI . Please disconnect all the external devices connected to the computer (printers, external hard drives, flash drives) and do not have any CD/DVD in the drive while following the steps.

  Answer please if you have any questions.

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• I entered the product key: / * removed product key * / for window 7 but it shows oxc004e003 error code

  I entered the product key: / * removed product key * / for window 7 but it displays oxc004e003 error code how can I fix this problem and it is easier to install

  Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Error "Windows back up has failed." Error code: 0 x 81000031 "when you save.

  Original title: "incomplete backup.

  I see a ' warning: 'Windows back to a failed'. " Error code: 0 x 81000031.  What does this error mean?

  (I use Windows 7 Home Premium.  The location of the error is "on the elements' (my external hard drive).

  Hi Sidney,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the incomplete backup.

  Perform the steps from the link below and see if it helps.

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and restore on a Windows 7 computer Assistant

  Meet us if you face problems with backup or any Windows question, and we would be happy to help you.

  Good day!

  Hope this information helps.

• He cannot get set Windows Update to download. Receive error code 80072EFE?

  Original title: Carol

  He cannot get set Windows Update to download. Receive error code 80072EFE.

  https://support.Microsoft.com/en-AU/KB/818018/en-AU how to troubleshoot problems connecting to Windows Update or Microsoft Update

  Do not trust article on the fixit.