PIN of the connector broken but the charger works always, safe to use?

Similar Questions

• HP ENVY 15 t-j100: pin in the charger is folded and cannot load laptopn

  I tried to recharge my laptop recently and noticed that he was not responsible because the PIN in the charger has deform and so unable to connect to the laptop.

  Is it possible that I could get replaced charger, or do I have to buy a new one?

  It comes from the expanded plant. You folded it. Warranty does not cover. Buy a new one.

• Faxing documents, but LAN charger works fax fails with an error "no dial tone".

  I have a HP Photosmart C7280 on my local Wi - Fi network.

  On the local network, I can print from my Mac (OS X Lion mountain) without problem.

  I can scan on the LAN from my Mac without problem.

  I can send and receive faxes on the printer itself without problem.

  But when I try to fax a document from my Mac on the local network by 'printing' for HP Fax I get an error 'no dial tone '. I know that the document is to achieve the C7280 because the phone number that I'm trying to fax to appears on the front panel. I know that there is no problem with the phone line because I can go to the machine and send and receive faxes. If the error 'no dial tone' is meaningless to me.

  Any ideas?

  I should mention that the phone number appears on the front panel as 1W8005551234 (I substitute a fake phone number, of course). I get the 1 prefix of composition in the dialog box print, as well as the phone number to ten digits in the number field. I guess that the printer driver is inserting the W as a code of 'pause', although no break is really necessary.

  Abandoned by my friend yesterday, and his printer had gone off the deep end. Printing gave only blank pages, although it sounded as if the printhead has been dithering away normally. Tried to copy something, with the same result. Has been through the usual list of troubleshooting and eventually got to cyclical food printer, which restored things to normal.

  So was the "no dial tone" error just an early symptom of a bigger problem pre-existing, or doesn't have the W in the connection string in my attempt at beginning of something through the Insider LAN fax corruption, or have the problem of fax and printing and copy problem unrelated to later?

  Who knows?

  Anyway, once the print worked again once I tried something fax on the local network of the Mac for the HP Faxback number, this time put the 1 in the phone number field of the dialog box print, rather than in the prefix field of numbering, and everything worked.

  If life is good.

• This is the app, "Permanent Eraser" safe to use on OSX?

  OSX 10.11.6 not having Secure Empty Trash option, is safe to use the App: Permanent Eraser to delete files? I'm afraid that this may damage other files on my MBP.

  Thank you

  Joe

  Secure erase is not necessary if you use FileVault to encrypt the drive. In addition, do not use any fix erase secure on an SSD.

• Firefox hangs before opening, but does not work in safe mode

  Firefox start, sometimes the browser window will open, but either way it hangs completely seized of the charges. I can open it in safe mode and have tried the suggestions of "Troubleshooting extensions and themes", but it hangs still, even with all add ons and extensions disabled, after removing and reinstalling the latest version of Firefox and reset the toolbar.

  Your crashreport:
  https://crash-stats.Mozilla.com/report/index/BP-f144bda2-12d0-4a31-94f8-318662111109
  This is caused by report of Trusteer. Try to disable it and see if that stops the noise.
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  http://www.Trusteer.com/support/en/report-problem
  According to the user in question 892517 Trusteer is aware of the problem and working on a fix.
  See also Bug 699776 - crash of nsXPTCStubBase::QueryInterface involving a RapportTanzan7.dll in the stack.

• 6 J_PW_NVRAM pins on the motherboard R920. I can use it as Fusion 1.2 to ioDriver2 feeder Duo?

  Power cable supplied with ioDriver2 Duo has 2 6pin connector. A large feeder and small for the I/o memory card. I find anywhere where to plug the large connector on my motherboard R920.  A Pin J_PW_NVRAM connector 6 can be found on the motherboard.  So my question is can I use it for my IO memory card if I can find a power cable 6 pin-to-6 pin.    Moreover, there are many pins covered with paper black on the back of my power distribution Board (I think it's PDB, in front of my diet.). Are they also connector additional electric supplier?

  The jumper PIN - Pin J_PW_NVRAM - 6 on every motherboard that I am aware of can't, they are jumpers to clear the Bios password and jumpers to clear the NVRAM (reset the bios).

• The following extensions are always safe to use with Firefox? Yahoo toolbar, McAfee WebAdvisor & Skype click on call

  I had these extensions installed since February 2015, when I bought my new computer. They always worked very well, but this morning I noticed that each say, «McAfee WebAdvisor/Skype Click-to-Call/Yahoo Toolbar could not be verified for use in Firefox.» Proceed with caution. All of these extensions have been download from their respective Web sites. Should I worry about this?

  In the future, Firefox refuses to run unsigned extensions. However, the first step being taken in Firefox 40 is to warn you that you have a little so you can check the updates and/or inform the Publisher of this impending problem.

  I'm sure that these three companies are aware of this change. What they need to do, is to submit their Add-ons for Mozilla for review and signature sometime before Firefox 41 is available and no doubt they will be.

  If they are not, please complain to them!

• What is the image size always optimal for use in Premiere Pro?

  I'm pretty new to Premiere Pro so please excuse any extreme stupidity.

  I make a movie composed of various interview with. I intend to drop in stills (and possibly scanner and pan around on them). Still images come from various sources and will have been filmed on different formats.

  I asked images high resolution, but asked what size I want the images she mm. Can someone advise?

  The film will be shown on Vimeo and on a Web site, but it is also more extensive for projection high definition if necessary.  The movie is HD 1080 x 1920

  Any advice greatly appreciated.
  Thank you

  Make sure that the person who provides still images is measured in PIXELS. Not MM, inch, DPI - but PIXELS no no. No other video issues.

  Your 'canvas' in first 1920 x 1080 (HD 1080) pixels, it's the size minimum everything should always be to fill the frame without having to to scale upward (loss of quality). Of course, if the image is portrait style, then it will NOT fill the frame, but rather will be black on the sides, bottom replacement or as others have suggested. In this case, make sure the height is at least 1080 (width will be narrower than 1920).

  You said you want to crop, like Ken Burns, so then you would like images greater than 1920 x 1080, such as the 3456 x 2304 proposed. Allows you to zoom in to a certain extent using pixels available in the image without actually upscaling the image at all. The more you want to zoom in, pixels more than you need to achieve this without degrading the quality of "blow up" the image.

  Good luck

  Jeff Pulera

  Safe Harbor computers

• Unable to run email of announcement of Craigslist with Firefox web browser. The link works fine when you use Internet Explorer. Don't know why this problem?

  When I click on send to a Craigslist of announcements of sale, e-mail software does not run. When I used the same craigslist Web page with Internet Explorer, the e-mail program runs without any problem. Not sure why this problem?

  If you change your preference of mail helper in Firefox for 'other use '.... "you are presented with a command prompt to select an application click 'Browse... '. "and browse your computer for the program of choice. Even if you're already shown two e-mail programs, try to re - select the one you want to use via the method go and then try again to open a mailto link.

  If this does not work, open your profile button in folder

       Help > Troubleshooting Information
  

  and the release of Firefox. With Firefox closed, remove the file "mimeTypes.rdf" of your profile folder, and then restart Firefox and Firefox will re - build the helper, file applications and you can try again to send someone from a link.

• Stuttering in Windows XP, the mouse works in safe mode

  Having a problem where my mouse is stuttering and getting hung-up constantly, tried with another mouse, same question. Everything works fine in safe mode, so I thought it was a problem with something in msconfig, no other startups don't aid (including diagnosis) plans. Reformat the drive, reinstalled windows XP, same question immediately, before XP was even born, so it may not be a new conflict driver or something. There is no change to the computer before the problem started, just appeared on a restart.

  Hello

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  Let us know if it helps!

• Is it possible to have the same work performed several times using the jobs and Planner?

  I was instructed to examine whether we can move all our DBMS and jobs table that are scheduled using submit next procedure of jobs in the job scheduler

  There are several offers that concern them;

  We run every 3 seconds - this work may take 20 minutes to complete and there may be multiple running simultaneously 8-9, both

  so, my question is possible to use the Scheduler for simply helping employment and then 3 seconds we kickoff again?

  or the first inning started three seconds ago should finish before the next could draw?

  is there any solutions for this?

  I thought maybe you could create a script that creates a new entry every 3 seconds which is named work differently so that they can run at the same time, however, I hope that there is a more simple solution

  DB - 11g

  Thank you

  Thanks for the comments. It's a start. What I do for this work is to use a program. Since my job call the same routine with the same number of arguments. I create based on a program.

• I have CS6 and had CC for dreamweaver, since I had not in CS6 and now I can't use my CS6 after I cancelled my CC? I used the tool and always impossible to use CS6

  I have the suite design CS6 and tried cc that Dreamweaver and Primere Pro. I no longer use CC and decided to uninstall it using the tool unistaller and now my CS6 ORIGINAL programs do not work because a creative cloud window opens telling me to update my subscription... I want more cc and I just want to use my CS6!

  Help...

  I uninstalled with this tool and restarted the fact that like 10 times... and again

  Cloud of reading takes up https://forums.adobe.com/thread/1584746 for some ideas

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Problems of reorganization of the items pinned in the recent Articles from applications menu pinned to the taskbar

  Hello

  Recently I encountered the following problem, for which I can't understand a solution. I have some programs such as Excel and Word pinned to the taskbar, and my most frequently used documents are pinned on the list of recent items of each of these programs (so I mean not the newest items on the start menu menu, but those pinned applications).

  For more than a year, pinned reorganization points on the upper half has functioned well. In recent weeks, however, the reorganization has unexpected results: say there are, B and C and D made the pinned menu recent Articles of Word in that order. When I try to drag the C between A and B, C will be displayed before. Similarly, when you try to drag between C and D B, B will be the last element.

  You, guys, a tip on how work this autour? I guess some kind of "reset" of this feature would be useful, it seems that something was stuck that wouldn't have to be pasted. If it's a browser, I would say that to clean temporary files. Is there something like that, what could I do?

  What I tried:

  * Detach all the elements of the word, and then start again pinning. No change.

  * Menu set start to not maintain a list of recent items, then activated this option. No change.

  * Searched my docs of the user and the registry for a list of the added items. Thought to find a folder of links asc:\Users\Launch\User Pinned\ \AppData\Roaming\Microsoft\Internet Explorer\Quick , but I only found a registry key that looks like containing all these elements in a key chain with some additional data, so that I wasn't not dare delete this reg value enough.

  (Environment: Windows 7 Ultimate 64-bit, English version)

  Looking forward to your advice.

  EM

  In fact a solution has been found in http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/list-of-recent-documents-not-showing-up-in-task/8f63be2f-67b0-463e-995e-8274adefdcbe, and it works.

  For me, the name of the file to be deleted in the %AppData%\Microsoft\Windows\Recent\AutomaticDestinations was 9839aec31243a928.automaticDestinations - ms, but the name can be an id and opposed on various systems.

  The best is to find your file reorganize everything, PIN or detach a file in Excel, or just to open and close a file and then search for the file with the most recent date any time. All the operations described, I suppose, will modify the corresponding file, so all you need to do after this is to sort files by date, to find and remove the latest file, and you can start re-adding pinned items to Excel.

• Two cameras, but only we work at the same time, need help

  I have exceeded the posts here, but not found answers to my type of problem.  I have two WVC54GCAs both have static IP on my local network addresses and I can see them both very well from there.

  I forwarded the port for one to 47624 and the other in 47625 in my router at home and in the configuration of the camera, I specified to use these other ports instead of the default port 80.  When I work and try to view them on the internet by their ip address and port # (e.g. http://22.22.22.222:47624), I get a time-out error, but I see one if I go to 22.22.22.222:80 port (even if the port that I specified in the configuration of the camera was another port).  I used dyndns open port testing tool (http://www.dyndns.com/support/tools/openport.html) that shows 47624 and 47625 are both open ok.

  I can connect to my router on the work 22.22.22.222:8080 and the router logs show the dyndns tool connected to the router via these ports after the test.  I was using a Netgear router and thought that might be the problem, so went out and I have a router Linksys wRT54G2 to see if it worked better, but have the same problem with the Netgear.  Here's the weird part, if I go into the router to work and change one of the cameras to pass to port 80 instead of the other port I would fix for it, I can see that the camera on port 80 despite the camera config always configured to use another port.  So when I remove the first camera port 80 in my router and change the other to port 80, I can see the other as good as this.  I have Comcast as my ISP and a Motorola SB5100 cable modem and can't understand why I'm able to raise over the internet using the spare port settings I specified.  I have spent a lot of time on this, I'd appreciate any help or other suggestions on how to make.

  As far as I know, all Comcast modems are just bridges... no firewall in them at all... The other possibility is that your IT Department at work blocking traffic... have you tried this in any other place outside your local network?