Pitfalls of disconnection of CAM

Similar Questions

• Missing camera alert

  Hi all

  I'm importing from a Canon Vixia HFS30; about 5 clips totaling about 1.5 hours from the internal HD cam.

  Each item is displayed in the browser, and it has a little icon of camera at the bottom left of the icon. Not all the cameras show that I noticed the icon. What is this icon

  import?  I'm not looking for import in the FCX help but nothing.

  Previously I dragged all the sequences in the timeline and it played, but now it's missing on reopening FCX and have disconnected the camera and it

  is the 3rd time it has happened.  FCX gives me the red icon of MIA.

  How can you check on the progress of the import?

  One additional wrinkle is that the owner of the cam has no power cord then use batteries running energy during the import process.

  Thank you

  Al

  The badge of the small camera means that the clip was not entirely imported.

  Connect the camera, select these clips with the badge and do file-> import-> import camera / Archive.

  Import occurs in the background, and for these long clips, it may take some time. You can check on these substantive activities by pressing command-9.

• G7X: Disconnects while sending "computer."

  I was so frustrated lately with the lack of support and the fact that I can't get the software to work.

  My G7X "sends to the computer', but he's going through the motions, nothing is sent and it disconnects before the progress bar moves.

  The Canon Image Transfer Utility said it's receiving pictures, but it's not.

  CameraWindow won't load again and it hangs on-screen contextual CameraWindow during loading - if I disconnect my camera manually, CameraWindow suddenly of the charges, but the camera is not connected!

  I'm at my wits end here. Can anyone help? I reinstalled Windows 7 from zero, two times and also set to update to Windows 10 TWICE and the problem persists despite everything - no other software other than chrome is on the PC.

  .

  RESOLVED:

  After many days and many hours with the technical support of Canon, I found the culprit.

  In my settings on the Netgear router, I "control access" enabled.  While the camera is on the "allowed list", there was a conflict, and once the access control has been transformed from the device worked as expected.

  Those who tear out their hair out--check if your router has a similar feature.

• Camera not in Task Manager

  My camera connects OK and I am able to download my photos. However when I go to disconnect safely, my camera does not appear in the Manager tasks as he has always in the past. I have no other choice than to disconnect the camera, and fortunately, it doesn't seem to affect the pictures on my camera.

  Thanks for the help, but still not solved. I spoke w Nikon support and was advised that it was not necessary to use the option disconnect safely with the camera. To try to slove was not worth.

  Once again, thanks for trying to help!

• Can I cut my camera in Photoshop and still get a glimpse of my creations?

  What happens when I disconnect my camera in Photoshop? Can I even seen my drawings?

  Yes; Overview CC implements cache all work plans that you viewed before disconnecting.

• AS3 how can you detect if someone shoots their camera into the USB port?

  In AS3 if the SWF Gets a hold of the camera of someone successfully and they begin streaming video everywhere and everything, but then halfway, either they wiggle accidentally their camera into the USB port, or the camera just sort breaks down, or something like that, how can detect you on the user side?  I tried using event listeners and different variables of Mark also every five seconds, but none worked. any of the public properties of the camera or its events seem to be acting funny of all when something happens like that.  And apparently you can just keep analysis the computer for devices (for a good reason, I suppose).

  Is there something I'm missing here?  Is it possible to detect the copy of a user of a SWF file (PF or AIR, but much more important still FP) when their camera has effectively stopped as the result of something goes wrong, like them what she wiggling the computer by mistake?  If so, how?  Thank you!

  Run your code and disconnect your camera. What are the common properties of it? Stop your flow? To return only a framework of specific color? These things can be used to detect, but you are right when you say that you can not detect more than a loss of packets from a NetStream object.

• Get data out of a dead A1409

  My 3 TB Time Capsule (model A1409) died this weekend.  I have no lights, but as many others have noted, the HD seems always spin.  But that's all.  I doubt that a power spike has taken, because it is behind a backup battery with surge protection system well, surge protection, etc..   That said, and to counter suggestions from iron soldering, I am not a probably being able to disassemble things, replaced components, etc...   Yet, I'm pretty disappointed by this failure.  And all of this leads me to two questions.

  The biggest question is this: has got apple any better quality/design on these things, or this time I should consider a backup drive and a wireless router not apple?  Right now, money IS a problem for me (sad to say), so if I invest, I want something that won't die because he is in power, or has flaws in design or components, etc..   I prefer to buy something I'll take later out of my network because the technology has evolved, not because he has not (make sense?)  What makes desirable TC, is the Nice packaging and ease of use.  But here, the story seems to suggest I COULD get 3 years out of one of them and then have to redo all.  Apple still cleaned his behavior on this product?   Is there a reason to believe that the latest generation of 3 TB TC is any more stable/reliable than older?

  Second, while I use the hard drive as a backup for time machine target, I DO (?) have some files on there, use it as a server for my office.  Most of the files are no big deal, but there are a few that I want to go back.  (I have backups off-site at home for the time machine backups that I can still use...)  Y at - it a hope of recovering files of the HD on old A1409 (Broken), and if so, what would that take?

  BTW, I use a MB Pro, version end of 2012, using to El Capitan. 10.11.4

  Thank you

  But here, the story seems to suggest I COULD get 3 years out of one of them and then have to redo all.

  A lot of electronics is now designed for a duration of 3 years... modems and routers for home use are at a price... as is the TC. It is not surprisingly when it works 24/7 in a box that is too small and with everything so close to the tolerance they fail after a few years... That's life in the throw away age. Cheap stuff that doesn't last.

  Is there a reason to believe that the latest generation of 3 TB TC is any more stable/reliable than older?

  No, it's the same... but the current is well late replacement, so if you can maintain the broad do so.

  The cheaper alternative is a USB key that you plug into the Mac. It is more reliable and faster than a TC, but long term that bothers.

  The best replacement is a Synology NAS QNAP. You can buy the small version of 2 disc for say $200... and another $ 300 for drives... that puts the price of $500 for a basic model enough. You can buy cheaper single drive NAS as WD MyCloud that do not offer backup TM for a computer. It seems that people have problems with more than a backup. I use synology NAS now and he can back up several computers and has been reliable... However you should not think that it will last forever... the discs themselves are often the weakest link... and you may need to replace the discs after a few years.

  At least they are designed to be repaired and replaced the discs... Apple design the TC sealed and there is no access to anything and without even spare parts.

  Most of the files are no big deal, but there are a few that I want to go back.  (I have backups off-site at home for the time machine backups that I can still use...)  Y at - it a hope of recovering files of the HD on old A1409 (Broken), and if so, what would that take?

  You must buy a USB to SATA disk shell or pregnant. Any big computer store has them. Buy the last type of USB3. They will cost $10-20 for the cheap.

  Some of them may be difficult to use so I recommend you to buy this sort of thing.

  http://eShop.MacSales.com/item/newer%20Technology/U3S3HD/

  OWC tend to specialize in Mac stuff. So you can talk to them and get advice.

  Remove the hard drive from the TC.

  This is a no job soldering iron...

  https://www.iFixit.com/device/Apple_Time_Capsule

  You need a heat gun... (the hair dryer works fine). Heat the rubber mat background full 3 min with a hair dryer on the highest heat and lower air circulation. Carefully take off the rubber... should not be divided... If he catches apply more heat, and no more pressure.

  Then you need a small Phillips screwdriver.

  Remove the 10 screws of 2mm at the base.

  Not just pull the cover up... the fan is connected to the base... Follow the pictures on ifixit site and return the cover so the fan cable is not pulled.

  The hard drive can then be disconnected and came out of the shell...

  Remove the stems of 4 screws from the base of the drive with your screwdriver or pliers if it is large enough.

  Place the disk in the USB case... Plug it into the Mac.

  Your files will be accessible from the Finder now... If you have any questions to talk to me.

  Now, what will you do with the shell...?

  We know in fact the fault is bad solder.

  This is a recommended way to fix it. Just the jury with all removed in the oven and cook... This will achieve a reflow of the solder... and it seems to be quite successful to bring back them to life. YMMV.

  s/apple-time-capsule-repair/gen4-a1409-i https://sites.Google.com/site/lapastenague/a-deconstruction-of-routers-and-modem...

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• Cannot take a picture with the Camileo X 100?

  After connecting my Camileo X 100 with the RCA connector to my LCD from LG TV, browsing through my images and possibly disconnect the camera, something strange happened.

  After I turned on the camera and tried to take a picture, nothing happened. I can't take a picture, turn a video, zoom in and out, or set the image and video preferences and settings. I can only navigate through the pictures and videos I took before. It seems that my camera is stuck in the same mode, when it was connected to my TV.

  I removed the battery several times and nothing. The only button that responds is the play button, and trying to take a picture, only the square (white, green, or red) is shown. Please, help :(

  Thanks for your comments!

• LifeCam does not?

  I have a gateway 831GM Intel (r) Pentium (r) 4 CPU 3.00 GHz 3.00 GHz, 3 GB of Ram under Windows XP 2002 SP3.  I installed Microsoft Lifecam Studio camera (part No.: Q2F-00001) and had no problems with it.  Used a Sunday for Skype and Monday when I tried to open Skype and Microsoft Lifecam the message - "there no camera connected to this computer."  I noticed that the blue on the camera lights at all.  I have disconnected the camera, reinstalled hardware, the driver updated and rebooted (all combinations of each process).  Am I missing something or is my camera old 2 months already undesirable?  As a first time - disappointed camera buyer.

  Hello

  WebCam - help
  http://www.Microsoft.com/hardware/en-us/support/how-to

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  http://www.Microsoft.com/hardware/en-us/support

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
  http://support.Microsoft.com/ph/7746#tab1

  MS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
  1-800-936-5700

  ==============================

  If you also find yourself needing support Skype:

  E-mail address is removed from the privacy *.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• * Kodak EasyShare Software.

  Hello. I have a Kodak EasyShare M863 camera and I've been using the Kodak EasyShare software. I don't like the EasyShare software! It is slow to load so I prefer to use Windows to see what's in my camera, but Windows Explorer does not detect the SD card in the camera. Is there a way to see the SD card in the camera without having to go out and put it in a card reader?

  I had the same problem. First of all Uninstall Kodak Easyshare, then go to Control Panel/Performance Maintenance, system, hardware, Device Manager. Go down to USB controllers, find your camera, uninstall it, then disconnect your camera. Connect again. Turn your camera on and it shoud install itself.

• How to fix a conflict driver VIA? Via the Audio drivers and OHCI IEEE 1394 Host controller?

  Because this motherboard (ASUS P5Q SE2), uses VIA VT1708S 8 - channel High-Definition Audio CODEC.

  And my PCI Firewire card is also VIA - according to Device Manager. It is running Vista. If I connect my DV cam (which has a mini-port FW on it), then turn it on, the entrance FW in Device Manager says there is a problem. But if I disconnect the cam, then restart, the FW entrance goes back to normal. I've seen this prob before, where someone else had the same prob (but firewire was aboard).

  I tried updating the FW driver through the Device Manager, but there isn't a newer driver available. I know that the FW card is fine. It was in my mobo previously (P5Q SE/R), which uses the Realtek ALC 1200, 8 - channel high definition Audio CODE, without going through. So, any ideas on how to resolve this conflict?

  Looks like I found the prob / cause. ASUS drivers Via for the sound. The latest version from the ASUS site

  I uninstalled them so I use the audio drivers by default Vista. The sound and the FW work. I plugged the cam DV again, made windows sound and it connected right away. Must be something in the audio drivers causing the conflict (such as an address / IRQ entry or something in the inf file).

• Intermittent high CPU usage on 64-bit Windows 7 computer

  Hi, I have a Gateway sx2800-07 and a few times a week, usually after sitting idle for a while, I noticed that the sound is distorted and the mouse stutters when it moves on the screen.  I did a trace xperf, which can be viewed herewww.willowproperties.com/report.etl it looks like usbport.sys is the problem.  I have updated my bios and you have downloaded all available software updates.  Any advice would be appreciated.

  Hello

  you have a high use of the DPC.

  These drivers cause high usage:

  iaStor.sys, USBPORT. SYS, dxgkrnl.sys.

  So, update the memory of Intel and the Intel graphics drivers. Try disconnecting the camera from the USB flash drive.

  You still have the high utilization of the processor?

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Live Messenger does not

  Live messenger worked without any problems until about 3-4 days ago on my laptop. I was chatting with a friend and checked my email and when I disconnected it came with an error message saying "Windows Live Messenger has stopped working" and then he went to look for a solution and she came back with "a problem caused blocking the program works correctly, windows will close the program and notify you if a solution is available. Now, whenever I click on messenger to bring it up it gives me the same message each time, I can however check my hotmail (Internet explorer), but can't chat and video conference.

  I had no problem before, and to make matters worse exactly the same thing happened tonight on my desktop computer. I tried to uninstall and reinstall on the two always get the same error message (as mentioned above) always on the laptop and the desktop each time that I clik on Live Messenger chat or video conference and can get to hotmail.

  My laptop Windows Vista Home Premium with Service Pack 2 64-bit OS, my office is that Windows 7 Ultimate 32 - bit OS.

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• Login error. SCR

  Im running Vista family premium, it starts and after a black screen for about 6 minutes finally the login screen will appear. I see the icons for both the accounts of users, but when I click it, nothing happens that he does not enter a password. You can tell in the background under its weight stuff. I leave for a day.
  I started in safe mode with the same event, except that I get the logon.scr application failed to initialize properly, and then the screen goes black.

  I started on the Vista cd and ran a repair that told me that I have to disconnect any camera or music devics (everything is disconnected)
  I also restored to a problem of the same point-still very early
  I ran the same diagnosis-another problem-memory is ok.

  This can be caused by the failure of hardware or software (corruption, malware), and there is no way to know who's here. Since you've already tried system restart tool, test the hard drive to make sure it's good (test of the RAM is OK but it is doubtful that the RAM has your problem) and do a clean install/Vista Factory restore.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you need get the data first, you can do from outside Windows by one of the following methods:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!