PIX 7.0 with ASDM 5.0

Similar Questions

• Cisco ASA 55xx. Backup/restore an external certificate signed with ASDM

  I have a Cisco ASA 5510, which is used for our VPN. It has an externally signed certs from Digicert. I replace the 5510 with a Cisco 5545 and wondered with ASDM can I save the cert of the 5510 and give the 5545. Or should I get an another reissued certs from Digicert and install from scratch. Is there something to look out for that set games with public/private keys, etc. Please let me know.

  You guessed it right, Edwin

  As long as you want just to maintain the certificate configuration, it is what you need to.
  Make sure that you install the root and root under new ASA certificate as well as one can extract this PKCS12 certificate.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Strange problem with ASDM

  Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

  When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

  I tried closed and without stop the interface of man, that does not.

  It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

  Other users of our team had the same problem.

  I also checked the syslog nothing.

  THX,

  Marc

  Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

  may have shunned your connection?

  To the CLI:

  # sh shun

  look if your IP address is present, if any make:

  # claire shun

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

  More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.

• The services configuration of firepower on Cisco asa 5506 with ASDM

  I have a few 5506 firewalls, and they are fully licensed with services of power, control, Protection, URL filtering, malware. I have intend running and configuration of all of this on the 5506 by ASDM. I was wondering if there are guides for a basic configuration and the implementation of policies available. Something to show a basic configuration which would technically begin inspection of traffic and work. Then I can edit and make changes to my taste.

  Thank you

  My recommendation to clients is to look at the Cisco Live, BRKSEC-2018presentation. Please refer to the 56 slide from for a good overview of how policies are installed in a module of firepower.

  There are also a number of other detailed guides available in the FireSIGHT Management Center product support page should you care to learn more about customization and operations. You can also find the series of videos of ASA FirePOWER on request to Labminutes.com useful to guide you on execution of operations of your system.

• connection to IPS with ASDM

  I do ASA5510 with IPS, the initial Setup. I can access the ASDM ASA. But when I click on the IPS tab in ASDM, it will retrieve the IP address of management of the IPS, but finally said 'unable to connect '.

  I tried same chaning IP using the CLI management, still no luck.

  Any ideas?

  Hello

  The SSM management interface is connected to your local network. At the back of the asa, where aip - ssm is plugged, you would see a management interface. This management interface should have a cable at your local lan switch or router. There must be a connectivity of LAN to the management interface so that info aip - ssm. has been found.

  Please note if help. :)

  Kind regards

  Sushil

• PIX 501 problems with the web server internal.

  I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.

  Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.

  Then I would like my setup now get help and also how to do when using other ports and SSL later.

  Thanks Thomas!

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  alfta hostname

  domain ciscopix.com

  names of

  name 192.168.1.16 TerminalPC

  name 192.168.3.0 Lager

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager

  outside_cryptomap_60 ip access list allow

  192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  outside_access_in tcp allowed access list all eq www

  host 62.108.197.90 eq www

  IP outdoor 62.108.197.90 255.255.255.192

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 62.108.197.10 255.255.255.255 outside

  location of PDM 62.108.197.11 255.255.255.255 outside

  location of PDM 192.168.1.0 255.255.255.255 inside

  location of PDM TerminalPC 255.255.255.255 inside

  location of PDM 192.168.2.0 255.255.255.0 outside

  location of PDM Lager 255.255.255.0 outside

  location of PDM 192.168.2.0 255.255.255.0 inside

  location of PDM 62.108.197.137 255.255.255.255 outside

  location of PDM 62.108.197.137 255.255.255.255 inside

  location of PDM 195.67.210.72 255.255.255.255 outside

  location of PDM 62.108.197.90 255.255.255.255 inside

  PDM logging 100 information

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1

  Enable http server

  http 62.108.197.10 255.255.255.255 outside

  http 62.108.197.11 255.255.255.255 outside

  http 195.67.210.72 255.255.255.255 outside

  http 192.168.1.0 255.255.255.0 inside

  http 62.108.197.137 255.255.255.255 inside

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp strong - esp-sha-hmac

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  peer set card crypto outside_map 20 195.198.46.88

  outside_map card crypto 20 the transform-set ESP-DES-MD5 value

  outside_map 40 ipsec-isakmp crypto map

  card crypto outside_map 40 correspondence address outside_cryptomap_40

  peer set card crypto outside_map 40 62.108.197.137

  outside_map card crypto 40 the transform-set ESP-DES-MD5 value

  outside_map 60 ipsec-isakmp crypto map

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 195.198.46.88

  card crypto outside_map 60 the transform-set ESP-DES-MD5 value

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 62.108.197.137 netmask 255.255.255.255

  ISAKMP key * address 195.198.46.88 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 sha hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet 192.168.1.0 255.255.255.255 inside

  Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www

  And a new application:

  outside_access_in list access permit tcp any host 62.108.197.90 eq www

  Access-group outside_access_in in interface outside

  * You have the group-access above on your original configuration message, BUT not on the above post.

  Don't forget to issue clear xlate after the change and also record with write mem.

  Try to do this in the pix CLI instead of using PDM.

  Hope this helps and let me know how you go.

  Jay

• PIX 501 - issues with Telnet

  I'm currently pre configuration of the firewall, so I had to build a small network to test the configuration. I am able to telnet system when I plug my laptop into the hub inside the firewall. However, when I plug on the external interface and the external address of the box telnet it seems to connect but I get no feedback eventually, he abandoned the connection. I'm trying to telnet on port 25 (to mimic the smtp traffic), the telnet server has been configured to listen on this port. When I try to telnet on 23 he refuses the connection almost immediately. Its almost like the PIX meets the demand of telnet instead of the destination system. I am able to get responses from the system with various icmp traffic.

  I have a static (inside, outside) mapping for the system I want to telnet to port 25.

  Any ideas?

  Thanks in advance.

  I would say that. The correction prevents would-be hackers to get HELP and your server smtp VRFY. You will also see:

  220 * 0 * 200 * 0 * 0200, instead of what type of server, etc.

  Glad to be of service.

  Byron

• Difference b/w PIX & router (router with the firewall option)

  Hi all

  I want to know that how we can differ with router (router with the firewall option) PIX bcz can also make Staefull packet filtering. What PIX device that reviewed by the customer to use PIX of the router.

  Thank you best regards &,.

  Guelma

  Hello

  There is a discussion in this forum on this topic; Check "Firewalling: PIX vs IOS Firewall" last conversation was released January 10, 2006. Let me know if it helps.

  Rgrds,

  Haitham

• PIX IPSec VPN with Cisco 877W

  Hi all

  I am trying to create a VPN between a PIX and a Cisco 877W tunnel but can't seem to get the tunnel. When I do a 'sho crypto session"on the Cisco 877, I get, he said session state is declining, then changed to NEGOTIATE DOWN, but it is now down again... Please find attached the configs for both ends... Are there commands to confirm that the tunnel is up other than to try to ping the remote end? I would greatly appreciate any help lift this tunnel.

  Kind regards

  REDA

  Hello

  Based on the configurations of joined, to do some changes. For example:

  1. the isakmp policies do not match on the router and the pix. Make sure the hash group Diffie-Hellman and life correspond on the 877 and pix.

  2. the access list for the ipsec traffic must be images of mirror of the other.

  3. make sure life of ipsec on the two peers.

  I hope it helps.

  Kind regards

  Arul

  Rate if this can help.

• New to pix, need help with "debug access list of all the" command

  I have a pix 515 v6.3. I am tring to use then "debug access list of all the" command to see what traffic is stopped by my access list. However, I don't get any output. I turn execution of the command, but nothing happens. Other debug commands give the console. Perhaps, I do not understand what "debug to access list of all the" is used for. Any help that can be provided would be greatly appreciated.

  Tim

  Also try following the commands of logging

  LOGG on

  LOGG buff 7

  term Lun

  M.

• Can VPN site-to-site with just 1 static IP address in PIX?

  Hi all

  Can I use pix for VPN with just 1 static IP address as follows:

  LAN-A---PIX1---INTERNET---PIX2---LAN-B

  Just PIX1 has static IP, PIX2 use DHCP from ISP. I have the config this type of VPN with another brand equipment. But the use of PIX, I just VPN config with both ends have a static IP and I can't find any information in the web site. Because when config VPN site-to-site I have to use the command 'same game '.

  Can someone tell me how can I do with PIX? Thank you!

  Best regards

  Teru Lei

  You just need to set up a dynamic encryption on PIX 1 card and a card standard encryption with a peer 'set' on 2 PIX. Here is an example configuration:

  http://www.Cisco.com/warp/public/110/dynamicpix.html

  Note that it also has VPN connection clients in 1 PIX (Lion), so forget all orders of "vpngroup" that you see in his configuration cause, they are not necessary for your scenario.

• How to disable the asdm sessions.

  Hello to all the experts,

  For some reason I can't go to the session of the asdm.

  You sh asdm sessions, it shows that I have 0-4 sessions in progress, but I don't have any session going at it, it was my previous access. He did not clear when I left the game.

  Try to erase with 'asdm disconnect 0', he takes the command, but do when an asdm session show. He is also always connected; so I can't start another session of asdm to the pix. PIX work os version 7.01. Any help on this will be highly appreciated. Thank you in advance for any input from the forum. Joseph

  To the best of my knowledge, there is a bug in version 7.01, I suggest to update for the maintenance release 7.0 (4) or above release.

• PIX 515E and remote access VPN

  I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

  I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

  Any help is appreciated,

  Hello

  Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

  Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

  There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

• CISCO ASA 5515 WITH THE VERSION OF FIREPOWER

  ASA 5515 service with the power of fire. Can be managed with ASDM firepower. ?

  Anyone suggests Versions for firepower, ASDM, ASA?

  Kindly help

  You will find it useful to install the Module of firepower on ASA for the management of the premises:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  Thank you

  Guillaume

  Rate if this can help!

• Adding a pix 501 VPN 2

  Hello.. I am beginner in this kind of things cisco...

  I'm trying to set up multiple VPN on a Cisco PIX 501 firewall with routers Linksys BEFVP41...

  Since not very familiar with the CLI, I use the PDM utility and it was very easy for the first... Unfortunately, I get this error when I try to add the second VPN using the VPN Wizard:

  Outside_map map (ERR) crypto set peer 200.20.10.3

  WARNING: This encryption card is incomplete

  To remedy the situation even and a list of valid to add this encryption card

  Hi garcia

  for each vpn/peer, you need to a separate instance of crypto card, the card will have the same name, but different sequence... numbers one map encryption can be attributed to an interface, but you can have several instance of cards inside a main...

  for configuration, you can go through the URL below... It has all the details on IPSEC config:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/config/ipsecint.htm

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA