CISCO ASA 5515 WITH THE VERSION OF FIREPOWER

Similar Questions

• ASA 5515 WITH LICENSE OF FIREPOWER

  Hello support team,

  We have configured cisco ASA 5515, firepower module added in it.

  Please give technical support to add L-ASA5515-TAMÁS = (Cisco IPS of firepower ASA5515, AMP, and Licenses of URL).

  @amalmichaelvj ,

  You are welcome.

  You can switch to FMC at any time. That one type of management can be used at a time given.

  FMC is supported by VMware (5.1 and 5.5), KVM and AWS. I would say that 95% or more of the facilities use VMware as the two platforms of the latter were just be presented earlier this year.

  You can find installation guides quick for all platforms supported here: http://www.cisco.com/c/en/us/support/security/defense-center-virtual-app...

  'Control' license free of charge (also known as "Protect + Control" is required for all the firepower of ASA modules.) Without it, you will not be able to deploy and enforce and other features (i.e., IPS, filtering URL or Advance Malware Protection features that are included in your license of TAMAS type).

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• What's up with the Version of El Capitan 10.11.4?

  What's up with the Version of El Capitan 10.11.4? I downloaded the update and see various improvements listed there. But, how can I take advantage of the improvements. There should be a better source to help the owners/users to take advantage of recent improvements.

  Don't know if you saw this link: http://www.macrumors.com/2016/03/21/apple-releases-os-x-10-11-4/

  Kim

• try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  kellycfromlosgatos wrote:

  Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)

  First talk you about selection of a network, and then say that there are no compatible backups. Do you have an older device? Having problems connecting to Wi - Fi, or restore a backup problems? If you had a device more former, is - it possible that this device had 9.2 on iOS? If Yes, then you will need configure the Mini iPad like new, update the iOS 9.1 to 9.2, and then you must use the settings > General > reset > erase all content and settings, to bring him back to the installation wizard. From there, you will be able to restore your previous backup.

• Engines: A version of the library is incompatible with the version of XNode

  I have SP1 2013 Labview and 2013 NXT Module installed f1.  I'm taking a class on Robotics where we use the Lego Mindstorms NXT module.  I have code that works very well in school, but when I load it on my laptop I get the error message: engines: library version is incompatible with the version of XNode.

  My son has the Mindstorms and I can't use the laboratory at the school (except for class) because it is open only during my work hours.

  I installed on the same disks that the school uses (their academic licences provides for this).  What should I do to get this code works on my laptop?

  Please help - I have an assignment due.

  The polymorphic VI you have in the block diagram is the patch of f1, but the other I think you are talking about is the equivalent of the patch of f2. If I am not mistaken, the school could have installed the fix for f2 (it would still appear as NXT 2013).

  This is how the VI looks in two versions:

  

  If you drop the first and the second in the school lab in your mobile, you can try to install the patch f2 in your laptop. You can download it here:

  http://www.NI.com/download/LabVIEW-NXT-module-2013/4678/en/

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• is not compatible with the version of windows you are using, with X 86 or X 64

  My son downloaded something and now I can't use anything on my computer, I get "not compatible with the version of windows that you are using, with the X 86 or X 64... I uninstalled it but it will not go away, I tried to do a system restore, but I get the same error... ideas?

  What antivirus you typed the problem started?

  It seems fishy to me, it could be a virus that has been downloaded at a given time, perhaps even until this program was installed. I would try an online virus scanner.

  Try this: http://windows.microsoft.com/en-US/windows-vista/how-do-i-remove-a-computer-virus
  And: http://quickscan.bitdefender.com/en/ (from what I hear, it removes something fishy, so be careful!)
  But also: http://housecall.trendmicro.com/
  It should work with IE (Internet Explorer).
  Curiously, the ones I tried before I could not find, so I did a quick search and these look good.
  I forgot to ask sooner, but you can open command prompt (start > Accessories > try click right-click on command prompt, and then run as administrator)?
  I hope this helps!
  PS What version of Internet Explorer you have?

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• The version of this file is not compatible with the version of windows you are runing problem.

  IM facing problem installing some software: the error message is below to:

  The version of this file is not compatible with the version of windows that you are running, check your computer's system information to see whether you need a x 86 version or x 64 of this program and then contact the software publisher

  

  while trying to change the compatibility to windows 7 option does not appear

  

  Windows 7 will not be included within the compatibility list, because you are already using Windows 7. Your only option is to contact the Publisher of software (the company that built the program) and get a version that works with your computer type (64 bit or 32 bit, whichever one you have).

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Z10 Z10 BlackBerry BlackBerry data are not compatible with the version of the software you are currently using

  Due to some problems with my BlackBerry Z10 I concerned with my service provider, after recommendation that I wiped my BlackBerry Z10, to update the OS security

  After all this. I am unable to restore completely, (Emails, Contacts, calendar and device settings cannot be restored)

  Link blackBerry screen: the data are not compatible with the version of the software that you are currently runnin

  Kindly guide me I'm too worried about my data, which is very important for me

  If you still get www.bberror.com//bb10-0015 and have not corrected:

  Read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...