PIX - Access behind full PAT

Similar Questions

• access-list with PAT

  Hi guys,.

  I would like to know if the accesslist with PAT, you can refuse statements. IE reject the order under the access list for the traffic that you do not want to be PATed.

  example:

  access list acl-pat deny ip 10.0.0.1 0.0.0.0 all

  permit access-list acl - pat ip 10.0.0.0 0.0.0.255 any

  If I won't 10.0.0.1 PATed.

  Hello

  It's perfectly legal and quite a common practice.

  Hope that help - rate pls post if it does.

  Paresh

• VPN to PIX access problem.

  I set up PPTP VPN on PIX 515 access with unrestricted license for Windows-based computers. I can connect but I'm unable to access all the resources on the network. I suspect this has something to access the list, but I don't know where to start. Here's the relevant part of the PIX config:

  access-list all-traffic ip to allow a whole

  access-list 100 permit icmp any any echo response

  access-list 100 permit icmp any one time exceed

  access-list 100 permit everything all unreachable icmp

  .

  IP address outside x.x.x.130 255.255.255.252

  IP address inside 192.168.254.1 255.255.255.0

  IP address x.x.x.97 255.255.255.224 DMZ1

  address IP DMZ2 192.168.251.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool vpnpool 192.168.254.201 - 192.168.254.254

  .

  Global (outside) 1 x.x.x.65 - x.x.x.93 netmask 255.255.255.224

  Global (outside) 1 x.x.x.94 netmask 255.255.255.224

  NAT (inside) 1 access-list all-traffic 0 0

  (DMZ1) 1 access-list all-traffic NAT 0 0

  Access-group 100 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.129 1

  .

  Sysopt connection permit-pptp

  Telnet 192.168.254.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  VPDN Group 1 accept dialin pptp

  PAP VPDN Group 1 ppp authentication

  VPDN Group 1 chap for ppp authentication

  VPDN Group 1 ppp authentication mschap

  VPDN group ppp 1 encryption mppe auto

  VPDN Group 1 client configuration address local vpnpool

  VPDN Group 1 pptp echo 60

  VPDN Group 1 client authentication local

  VPDN username * password *.

  VPDN allow outside

  dhcpd address 192.168.254.100 - 192.168.254.200 inside

  dhcpd dns x.x.x.131 x.x.x.200

  dhcpd rental 86400

  dhcpd ping_timeout 750

  dhcpd allow inside

  Looks like you forgot to add a "nat 0" defines that there are no PAT beween your local inside network and the PPTP DHCP pool.

  PPTP pool must be different from the inside pool otherwise it is not routable correctly.

  no ip local pool vpnpool 192.168.254.201 - 192.168.254.254

  # Choose a new network PPTP pool that is not in use

  example of dansMon # is 192.168.1.0/24

  IP local pool vpnpool 192.168.1.1 - 192.168.1.254

  access-list 101 permit ip 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0

  (Inside) NAT 0-list of access 101

  See this site for more information:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

  http://www.Cisco.com/pcgi-bin/support/browse/psp_view.pl?p=hardware:PIX & s = Software_Configuration

  see PPTP

  sincerely

  Patrick

• PIX 501 NAT and PAT with a single IP address

  Using the following configuration, on my first PIX 501, I am unable to provide a server of mail to the outside world and allows inside customers to browse the Internet. :

  6.3 (5) PIX version

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable password xxxx

  passwd xxx

  hostname fw-sam-01

  SAM domain name

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  No fixup not protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  outside access list permit tcp any host 62.x.x.109 eq smtp

  access the inside to allow tcp a whole list

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside the 62.177.x.x.x.255.248

  IP address inside 192.168.45.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 192.168.45.2 255.255.255.255 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  public static 62.177.x.x.x.45.2 (Interior, exterior) mask subnet 255.255.255.255 0 0

  outside access-group in external interface

  group-access to the Interior in the interface inside

  Route outside 0.0.0.0 0.x.x.x.177.208.105 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.45.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet 192.168.45.0 255.255.255.0 inside

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd lease 3600

  dhcpd ping_timeout 750

  : end

  It is I'am using access list and groups wrong or am I wrong in PAT/NAT configuration.

  Please advise...

  Hello

  I went through the ongoing discussion. The pix configuration should be fine for now according to suggestions. The problems seems to be on the server. If it is a new installation of windows, then there is an option not to accept requests that are not local network.

  If you want to check if pix allows connections and then when you telnet to port 25 of the outside, just run the xlates control.

  SH xlate and it should show you a translation for the inside host. More than a quick test if pix allows traffic is to check 'sho-outdoor access list' and see if the counters are increasing.

  Hopefully this should help you.

  Arun S.

• Apple TV has access to full episodes of MSNBC content? Seems to be a simple question, Apple could respond with a list of applications to Apple TV, but I have bee unable to find a definitive answer. If only on iPhone and iPad is there a workaround

  Would like to, but Apple TV if I get access to the full episode of MSNBC content. This can be done?

  If only for iPhone and iPad, the workaround would be mirror airplay How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

• Pix access lists

  I am facing convert statements leads on our PIX 520 access lists. Is there a better way to do this will be as little as possible traffic interruption? For example, to create access lists and then remove the conduit, or vice versa?

  Second, is there a priority recommended in order to access list?

  Hello

  This is a very good paper on the conversion of lines to the ACL, also when writing ACL always have your most important ACL on top of the ACL work from the top down. When you make changes to the ACL or static lines always issue the command clear xlate and save with RAM command.

  http://www.giac.org/practical/GSEC/Bill_Donaldson_GSEC.pdf - by Bill Donaldson, GSEC.

  If you want more information/inf, then let me know.

  Thank you / Jay.

• VPN bewtween 2 PIX - 1 behind a NAT router.

  Hello

  I created 2 PIX with a VPN tunnel between them and it worked. Small was during a test well before that of PIX has been shipped to the location where it has been implemented (with of course the new addresses IP etc.)

  Now this PIX is placed behind a Zyxel router running NAT, and the tunnel will not simply come to the top. It is never further than the State of 'mm_sa_setup '.

  I am aware that the only thing that is different from when he worked is the NAT router damn, so I should be aware of this router? I'm going nuts: 0)

  Oh and btw. I use ESP-3des-sha.

  Thanks in advance,

  Rasmus

  When you activate the NAT - T, Cisco PIX automatically opens port 4500 on all active IPSec interfaces so you should be sure that the UDP 4500 port is not blocked between two PIX.

  Kind regards

  Mehrdad

• Is it possible for a user of chromebook to access a full version of Adobe Reader?

  I am a high school teacher, and for a few years, I use an iPad app, iAnnotate. It works great, and it's better for when I want to give audio feedback to students on their paper. It is integrated into Google Reader, so I just students transform their Google Docs in PDF format, see the final draft of a document in their car, and add my audio commentary, as well as any other annotation. When I save, the file has already been annotated, and it was handed to them immediately.

  This works wonders until our school converted to chromebooks last year. Now, each student has a chromebook and can access a PDF file, but it does not open up as a complete document. Basically, they can't him the audio. Through the tutorials on how to access the PDF correctly is a pain, and students often miss steps when they have to go to a full version on a computer at home. Limit even more, we've cut up to about 10 desktop computers that students can access the library, so that students who cannot access a PDF file at home are forced to take turns in the library.

  Does anyone have a solid solution? There are other applications as audio do, but none as carefully as annotated PDF file, and I love the benefit of students PDF of the final presentation, that keeps responsible for their work.

  Hi Koz00,

  Please refer to this topic, question of Chromebook. I hope that it will respond to your query.

  Kind regards

  Nicos

• No access to full windows

  original title: Aero

  We accendiantly something to our screen size when we record we cannot access the entire page and get to our bookmarks etc.

  Right-click on the desktop, and then select the screen resolution.

  Set the resolution on the recommended size of your screen.

• The upgrade of the single application accession to full membership CC of the teacher.

  I currently have a monthly subscription of CC in Photoshop. I am a teacher in an international school, and my a .edu email address. I want to upgrade to a full membership of creative cloud in the title of the pricing of the teacher. How can I upgrade my membership?

  Hi Chris,

  To upgrade on a different plane, you must cancel the current subscription and then sign up for membership in education.

  For cancellation, please contact customer service or check the help below document:

  Cancel your membership creative cloud...

  New plan: plans pricing and membership creative cloud | Adobe Creative Cloud

  Kind regards

  Sheena

• Unable to access their full storage capacity

  I'll put up a Promise Vtrak M610i for Iscsi storage on our Vsphere hosts and everything went a lot until we started to add storage. We see the lun as a 7.3 tb capacity, but this gives us only 836 GB available. Any ideas?

  Very frequent error - ESX and ESXi can recognize only ONE of less than 2 TB (2 TB - 256 B to be exact) - you have skinning your LUN in small chucks - recommended is 300 GB to 500 GB per LUN.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Termination of VPN on Pix behind router IOS with private subnet

  OK, basically, I wonder if it is possible to terminate a VPN connection on a Pix 506 Firewall which is behind a router IOS. The public interface of the Pix 506 have a private on a 29 ip address will IOS within the interface. Network is configured as follows:

  Internet as 10Base T

  | (5 public - X.X.X.34. 38)

  | (In WIC-1ENET)

  | (.34 assigned to interface)

  Cisco 1760

  | (Pomp) | (WIC-4PORTSWITCH)

  | | (10.0.0.1 29 on 1760)

  Net private Pix 506

  (192.168.1.0) (10.0.0.2 29 on Pix)

  Now, two internal interfaces of the 1760 are configured to PAT on the IP of the interface of the 1760 and all internet traffic goes perfectly. None of the access lists are currently applied anywhere on the 1760 and a static translation on the 1760 is configured pour.35 to 10.0.0.2 ('public' ip pix). RDP and other services authorized in the pix access list work perfectly well from the outside world when you enter a.35, but if I try to terminate a VPN from a pix 501 for the pix 506 offsite using the Intellectuelle.35 property, it does not work.

  Is it possible to do this type of work setting.

  I realize I could put an external switch to 1760 and run the public subnet directly and individually in the 1760 and Pix 506, however, I really would prefer not no need to do so if it is possible to avoid it.

  Remove the crypto map to the interface on the PIX and reapply.

• Using VPN Client coming out behind a PIX

  As I understand it, a PIX can operate as a VPN endpoint for IPsec tunnels, or allow IPsec traffic to pass to the other endpoints behind him; My PIX is an end point, but there are a few users who wish to use the VPN Client to connect to outside points beyond the firewall.

  Is it possible to configure a PIX to two pass through IPsec traffic AND be an endpoint?

  On a related note, two customer software VPN hosts can connect to each other?

  Thank you

  Marc

  My pix company does exactly what you posted, there is lan - lan vpn, and we again establish vpn to other companies via a software vpn client.

  concerning the transmission of described video, it should not need additional acl or configuration assuming that there is no acl on the pix. a question must be noticed is that the other end (i.e. the end point of the remote vpn client) needs to nat-traversal since the local pix usually perform nat/pat.

  However, the vpn directly between two clients is not feasible as its name suggests (they are the two client).

• Place a FIOS for VPN router behind PIX 501

  I have a Verizon FIOS internet connection and one of their routers wide wireless broadband, and this is a configuration of base completely... their router DHCP and firewalls, and the connection has a dynamic address.  I would put the PIX 501 behind the Verizon router as one of its clients and make the VPN PIX of other PIX 501 at other locations, such as my entire network has access to remote networks.

  Is this possible, and if yes, any who could some suggest configurations (how to address internal and external, static routes ports that may be required somewhere, etc.)?

  Thanks for any help.

  When installing my FiOS, I had already asked that it be installed on the Ethernet cable. Don't know they need to do something for you to spend the coax to Ethernet.

  The best way to test it would be to find the Media Converter (follow the coaxial cable between your FiOS router to the demarc and there should be a box with a coaxial port, some phone Sockets and an Ethernet port). If you unplug the coaxial cable and plug a laptop computer on the Ethernet port, see if your laptop takes a public IP address. If Yes, then you just have to run to your PIX501 Ethernet cable and you should be ready.

  Just to note that Verizon, according to your region, reserved DHCP assignments. This means that you may need to call Verizon and ask them to release the previous assignment of DHCP-MAC addresses. I had this happen recently. They must release the assignment then your PIX will pull a new IP address and they will book your new IP - MAC address assignment. They do this to speed up the connection to a cold start time on the router.

  Basically, they are filtering by MAC address, but rather through a sticky ARP where they clear the entry, and then the next device that connects records his MAC address and then only that device is permitted to connect to this leg of the cable. So there is a bit of work you have to do, but the most difficult part would be sitting on hold waiting for a tech, if you call to Verizon.

• How to get Firefox Mobile to open Outlook Web Access Premium 2010/Full?

  Microsoft Exchange Website indicates that Firefox is one of the browsers to access the full/premium version of OWA 2010 level 1.

  Firefox (v. 16) on my desktop and laptop computers accessing premium/full version of OWA 2010.

  However, the two (v.17 and Beta 18) Firefox for Android and Tablet do NOT access bonus/full version of OWA. Only a light version of OWA is available. Check box for the light version can be deselected.

  What settings can I change or add-ons can install to access premium/full version of OWA using Firefox Mobile?

  Thank you.

  I wonder if it is wise to use a web application 3-column on a tiny screen. That said, you can try to pass for a desktop browser by changing the user agent. There is an add-on called Phony that may be useful for testing.