PIX allows all IP addresses in a 29 subnet sticky PPPoE of SBC?

Similar Questions

• ACLs on Cisco router - block outside traffic, allow all inside

  Hello

  I am creating the ACL on the router Cisco that will allow all traffic within internet and don't allow specific traffic on the internet inside.

  This is what I have configured and puted on the interface of the router connected to the ISP:

  10 permits all icmp (411 matches)
  20 permit tcp "my public IP address" no matter what eq 3389 (46400 matches)
  30 permit tcp "my public IP address" no matter what eq 22 (9185 matches)
  40 "my public IP address" ip allow match any (3207)
  50 permit tcp any any eq smtp (11 matches)
  60 permit tcp any any eq www (56 matches)
  70 permit tcp any any eq 443 (29 items)
  80 permit tcp any any eq field (5 matches)
  allowed 81 UDP everything no matter what field of eq (7 matches)
  allowed 82 UDP any eq (10564 matches) field
  83 permit tcp any what eq field everything (10 matches)
  90 permit udp any any eq ntp (13317 matches)
  95 permit tcp 192.168.0.0 0.0.0.255 any

  Dialer interface 1

  IP Access-group 101 IN

  So I can connect to my public IP to the LAN of the customer via RDP and SSH (which is OK), but users of the client cannot access Internet (which is not OK.)!

  Users are all in the same Vlan. Between the interface Vlan and outside interface (dialer 1) Pat.

  There is no other ALC on the router except for PAT.

  What I'm missing here?

  Thank you.

  Is this why 192.168.0.0/24 is present in the list of ACL 101? What is the remote subnet that you connect to port 3389?

  If your local subnet interior is a soldier of the C class, it must be your global external address you want to add to the ACL 101.

  Better yet, run an IPSec tunnel between the sites.

• New version of Thunderbird grabs all Mac addresses Mail instead of simply treat associated with the email for Thunderbird account. Why?

  Old version not shown contacts associated with the email address associated with Thunderbird. New version captures all THE addresses listed in my Mac Mail address book program. Is a huge list if I'm looking for an address or a specific person. A real pain! Any way to stop this?

  Problem solved. Just say Thunderbird is not to use this address book. All back to normal now...

• my service tech remove thunderbird because we do not support, but I still prefer AND it had ALL my addresses top. Is it possible to get it back

  my service tech remove thunderbird because we do not support, but I still prefer AND it had ALL my addresses top. Is it possible to get it back?

  Thunderbird consists of a program (installed under Program Files) and your data, which you can find in your profile folder (explained here.
  As long as you still have your profile data, it will be once you reinstall Thunderbird.
  You can even run Thunderbird on a USB stick if you wish.

• HOW to RESTORE THE SETTINGS FOR NEW emails I WRITE, SO ONCE MORE, THEY INCLUDE a TAB of E-MAIL SENDING & a CONTACTS TAB, WHO LISTED ALL MY ADDRESSES of E-MAIL STORED?

  When I open a new empty email, NO send an e-mail or the Send option is visible; There is a Contacts tab, where I can access ALL the addresses to which email regularly. How to restore these tabs in all new empty emails that I opened?

  I just learned how to send something by pressing Enter control AND at the same time. but it helps me NOT at all; I want to restore the old settings. I know that the problem started in my last email, after I had clicked and uncontrolled of different elements, in order to enlarge the writing to the email. Now, unfortunately, all emails are no longer necessary tabs to SEND the MAIL and CONTACTS. I appreciate your wisdom in this case...

  Open a window of writing.
  Press the alt key to make the call of menu bar.
  The menu bar, select View-Toolbars and relight the toolbars.
  The Send button is the Composition toolbar.

  Press F9 to turn it back on the Contact Sidebar.
  You can also activate the box contact power under page layout display on and off.

• erase all my addresses

  I would like to delete all my address in address book and try again. How can I do this?

  Open Contacts, click a Contact, and then use the Edit menu > select all or command, and then made a right click (or Ctrl click) on a contact and click on remove the maps.

• How can I allow all sites to use THE SESSION cookies?

  How can I allow all sites to use cookies for THE SESSION?

  Yes, Firefox keeps cookies allowed unless you use to remove the navigation, search and download history on Firefox to delete cookies.
  You can easily check that yourself.

• How can I put the Windows XP firewall in a port configuration 'allow all' and only block some ports?

  Without going into the details of why I need to do this, I'm putting the firewall of Windows XP in one allow all the configuration of ports and only refuse some ports I have in a list.

  I train this script via the command-line batch with the netsh firewall add portopening command.  From what I've read, if enabled the firewall denies all traffic and only allows ports with exceptions, so through batch scripts, I opened all the 65 000 + ports TCP and UDP, essentially with the firewall turned on but in a configuration of "allow all the»  I don't deny the 100 or so ports to my list that I want blocked after they are all open.

  This strategy seems to work, but the problem I waited and I now see is that svchost.exe takes 50% of my CPU time, have to deal with constantly these firewall rules.

  "From what I've seen on Windows XP, there is no way to have the firewall ON, and in a configuration of" allow all the "" because the XP firewall may not have defined port ranges, they must be defined one by one.  It looks like Windows Vista or 7 would be much easier because the firewall has got a re vamp of advanced features.

  Does anyone have a suggestion on how to realize this "allow all", deny some' strategy?  I know it's a strange use of the Windows Firewall, so let's please jump in front of a 'why would you do this incredibly stupid thing?"messages.

  Also, if it was the wrong forum (or website) to post on for this kind of question, I'd appreciate a recommendation of a more appropriate forum.

  Hello

  See the steps in the following article.

  How to manually open ports in Internet Connection Firewall in Windows XP?

  http://support.Microsoft.com/kb/308127

• How can I stop Outlook Express to automatically insert all incoming addresses in my address book?

  Outlook Express automatically inserts all incoming addresses including the se in my address book. How can I stop this?

  This is a forum for Windows Vista, but Outlook Express is not available on Windows Vista.  I'm moving this thread to the Windows XP forum.

  In Outlook Express, click Tools > Options > send and uncheck automatically put people I reply to my address book .

• How do I allow all redirects in the world in 49 of Firefox?

  The answers to this question were posted in 2014 and do not apply to Firefox 49. I am a smart internet user and know where I'm going. Firefox blocks all the redirections and asks me if I want to enable it. Of course I do, since I deal with most of the sites, and it was me who asked to go to another site. If someone, PUHLEASE, tell me how do I allow all redirects without being invited?

  Redirect Firefox Add-on poisons you just with the creation of rule on any that I give a shit.

  In Firefox 49.3, we just hit advanced under the option to find. Thank you for everything.

• How to allow all programs in a folder to the outgoing connection in Windows Firewall?

  An example is Adobe Flash Player, because each of them has a new file name.  I would like to allow all the EXE in this case establish an outbound connection.  However, I can't find a way to do it.

  Thank you

  Hi Redhonker,

  Thank you for the update.

  I suggest you post the same question in the TechNet forum for assistance:

  TechNet: http://social.technet.microsoft.com/Forums/en/w7itprosecurity/threads

  In case you have any questions about the Windows operating system, please post on the Microsoft Community Forums and we will be happy to help you.

• Auth of remote VPN through LDAP allow all users!

  Hello

  I have 5505 firewall and security license. I have configure remote VPN on firewall through CLI with the commands below. Remote VPN works well, but the problem is, it allows all remote VPN users. I need to restrict remote VPN access bit user, I need to configure via CLI, I don't want to go through ASDM, can someone help me with CLI?

  ASDM I can able to perfom below things I'm not able to perform through CLI

  Configuration-> access to the network (Client)-> dynamic access policies

  

  

  

  Through ASDM I'm able to set the VPN users are allow to remote VPN access, how to set up same thing through CLI

  Here's my CLI:

  LDAP attribute-map CISCOMAP

  name of the KFG IETF Radius-class card

  map-value VPN CN = VPN, DC = domain, DC = com noaccess_pri

  map-value VPN CN = VPN, DC = domain, DC = com noaccess_bk

  map-value VPN CN = VPN, DC = domain, DC = com splitgroup_pri

  map-value VPN CN = VPN, DC = domain, DC = com splitgroup_bk

  AAA-server ldapgroup protocol ldap

  ldapgroup AAA-server (inside) host 10.1.10.5

  LDAP-base-dn dc = domain, dc = com

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password Inf0rmati0n1

  LDAP-connection-dn cn = VPN, dc = domain, dc = com

  microsoft server type

  LDAP-attribute-map CISCOMAP

  internal noaccess_pri group policy

  attributes of the strategy of group noaccess_pri

  VPN - concurrent connections 0

  output

  internal noaccess_bk group policy

  attributes of the strategy of group noaccess_bk

  VPN - concurrent connections 0

  output

  internal splitpolicy_pri group policy

  Protocol-tunnel-VPN IPSEC l2tp ipsec

  tunnel-group splitgroup_pri General-attributes

  ldapgroup group-LOCAL authentication server

  internal splitpolicy_bk group policy

  Protocol-tunnel-VPN IPSEC l2tp ipsec

  tunnel-group splitgroup_bk General-attributes

  ldapgroup group-LOCAL authentication server

  Thank you

  Abhishek

  Hello

  You cannot configure the DAP via CLI Protocol because the configuration is saved in a file dap.xml and is stored in flash of the SAA.

  You can configure the DAP protocol using the following link:

  http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml#T4

  Also note that the link mentions the following:

  Note:

  The dap.xml file that contains the attributes of selection policies DAP, is stored in flash of the SAA. Although you can export the file dap.xml out, the edit box (if you know about the xml syntax), and re - import again, be very careful, because you might ASDM stop treatment of DAP files if you have misconfigured something. There is no CLI to handle this part of the configuration.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• Can I use family safety to allow all Web sites in the "public interest" and to block some specified Web sites?

  I use Windows 8 and I want to create an account for the kids to use for homework.

  It seems reasonable to allowing all Web sites in the category 'general interest '. I also want to block specific Web sites that I know can be distracting.

  It seems that this should be easy. I just select the category of the "general interest" and also add sites to the blocked list. However, it gives me not the behavior I expect. I find that in the list of the blocked websites are accessible as usual.

  Shouldn't this approach do I want? In the affirmative, please can you give some advice on why I see this problem.

  Thank you

  Ben

  I found the answer to my original problem - some products McAfee has also installed and was interfering with parental control.

  Ben

• Any way to allow all Agents in 11G?

  We will have a difficult time in the upgrade of our BI_SCHED 10 G schema for the schema BIPLATFORM 11 G. Honestly, the story of iBot is not necessary. However, on the upgrade of our DR. all iBots have been improved to 11G agents, but they are not enabled. Is there a way to bulk activate everything?

  Hello

  Long back, I made the same way, allowing all the agents(100+) after the upgrade I did find a way (manually check the brand activated) but the good thing is that we get all the scheudler times and list of recipients.

  Even at the level database found no flag to set (enabled) allowing you can try...

  Thank you

  Angelique

• A list of all IP addresses

  I try to get all IP addresses on a virtual machine and the associated portgroup.

  $vm. Guest.IPAddress

  I have the Vlan

  $vmvlan = get-VirtualPortgroup - VM $_. Name | %{$_. VlanId}

  Now, if there is more than 1 Vlan I can get like this

  $vmvlan [0]

  $vmvlan [1]

  Anyone know how I can do the same for IP addresses?

  CFormage,

  I think you might do something wrong. Maybe take the command echo.

  Here's what I get under these commands on my setup. PS. I'm under vCenter 4.1 and ESXi 4.1.

  [vSphere PowerCLI] C:\ > $vm = get - machine virtual vmname
  [vSphere PowerCLI] C:\ > $vm.guest.IPAddress
  0.0.0.0
  10.3.59.102
  [vSphere PowerCLI] C:\ > $vm.guest.IPAddress [0]
  0.0.0.0
  [vSphere PowerCLI] C:\ > $vm.guest.IPAddress [1]
  10.3.59.102